Formation and structure of 1:1 complexes between aryl hydroxamic acids and vanadate at neutral pH

Although aryl hydroxamic acids are well-known to form coordination complexes with vanadate (V(V)), the nature of these complexes at neutral pH and submillimolar concentrations, the conditions under which such complexes inhibit various serine amidohydrolases, is not well established. A series of qualitative and quantitative experiments, involving UV/vis, (1)H NMR, and (51)V NMR spectroscopies, established that both 1:1 and 1:2 vanadate/hydroxamate complexes form at pH 7.5, with the former dominating at submillimolar concentrations. Formation constants for the complexes of several aryl and alkyl hydroxamic acids were determined; for example, for benzohydroxamic acid, the stepwise formation constants of the 1:1 and 1:2 complexes were 3000 and 400 M(-1), respectively. The (51)V chemical shift of the 1:1 4-nitrobenzohydroxamic acid complex was -497 ppm, and that of its unsubstituted analogue was -498 ppm. A (1)H-(15)N HSQC spectrum of the 4-nitrobenzo-(15)N-hydroxamic acid/vanadate complex indicated the presence of an N-H group with (15)N and (1)H chemical shifts of 115 and 5.83 ppm, respectively. A (13)C NMR spectrum of the complex of 4-nitrobenzo-(13)C-hydroxamic acid with vanadate displayed a resonance at 170.1 ppm and thus a coordination-induced shift (CIS) of +3.8 ppm. In contrast, the CIS value of an established 1:2 complex, thought to contain chelated hydroxamic acid ligands, was +11.9 ppm. These spectral data led to the following structural picture of 1:1 complexes of vanadate and aryl hydroxamic acids. They contain penta- or hexa-coordinated vanadium. The ligand is in the hydroxamate rather than hydroximate form. The ligand is presumably bound to vanadium through the hydroxamic hydroxyl oxygen, but the hydroxamic acid carbonyl oxygen interacts weakly with vanadium. These species are the most likely candidates for the inhibitors of serine amidohydrolases found in vanadate/hydroxamic acid mixtures.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

Synthetic models for the cysteinate-ligated non-heme iron enzyme superoxide reductase: observation and structural characterization by XAS of an Fe(III)-OOH intermediate

Superoxide reductases (SORs) belong to a new class of metalloenzymes that degrade superoxide by reducing it to hydrogen peroxide. These enzymes contain a catalytic iron site that cycles between the Fe(II) and Fe(III) states during catalysis. A key step in the reduction of superoxide has been suggested to involve HO(2) binding to Fe(II), followed by innersphere electron transfer to afford an Fe(III)-OO(H) intermediate. In this paper, the mechanism of the superoxide-induced oxidation of a synthetic ferrous SOR model ([Fe(II)(S(Me2)N(4)(tren))](+) (1)) to afford [Fe(III)(S(Me2)N(4)(tren)(solv))](2+) (2-solv) is reported. The XANES spectrum shows that 1 remains five-coordinate in methanolic solution. Upon reaction of 1 with KO(2) in MeOH at -90 degrees C, an intermediate (3) is formed, which is characterized by a LMCT band centered at 452(2780) nm, and a low-spin state (S = 1/2), based on its axial EPR spectrum (g(perpendicular) = 2.14; g(parallel) = 1.97). Hydrogen peroxide is detected in this reaction, using both (1)H NMR spectroscopy and a catalase assay. Intermediate 3 is photolabile, so, in lieu of a Raman spectrum, IR was used to obtain vibrational data for 3. At low temperatures, a nu(O-O) Fermi doublet is observed in the IR at 788(2) and 781(2) cm(-)(1), which collapses into a single peak at 784 cm(-1) upon the addition of D(2)O. This vibrational peak diminishes in intensity over time and essentially disappears after 140 s. When 3 is generated using an (18)O-labeled isotopic mixture of K(18)O(2)/K(16)O(2) (23.28%), the vibration centered at 784 cm(-1) shifts to 753 cm(-1). This new vibrational peak is close to that predicted (740 cm(-1)) for a diatomic (18)O-(18)O stretch. In addition, a nu(O-O) vibrational peak assigned to free hydrogen peroxide is also observed (nu(O-O) = 854 cm(-1)) throughout the course of the reaction between Fe(II)-1 and superoxide and is strongest after 100 s. XAS studies indicate that 3 possesses one sulfur scatterer at 2.33(2) A and four nitrogen scatterers at 2.01(1) A. Addition of two Fe-O shells, each containing one oxygen, one at 1.86(3) A and one at 2.78(3) A, improved the EXAFS fits, suggesting that 3 is an end-on peroxo or hydroperoxo complex, [Fe(III)(S(Me2)N(4)(tren))(OO(H))](+). Upon warming above -50 degrees C, 3 is converted to 2-MeOH. In methanol and methanol:THF (THF = tetrahydrofuran) solvent mixtures, 2-MeOH is characterized by a LMCT band at lambda(max) = 511(1765) nm, an intermediate spin-state (S = 3/2), and, on the basis of EXAFS, a relatively short Fe-O bond (assigned to a coordinated methanol or methoxide) at 1.94(10) A. Kinetic measurements in 9:1 THF:MeOH at 25 degrees C indicate that 3 is formed near the diffusion limit upon addition of HO(2) to 1 and converts to 2-MeOH at a rate of 65(1) s(-1), which is consistent with kinetic studies involving superoxide oxidation of the SOR iron site.     

Synthesis and characterization of the aqueous solution chemistry of the food-derived carcinogen model N-acetoxy-N-(1-methyl-5H-pyrido[4,5-b]indol-3-yl)acetamide and its N-pivaloyloxy analogue

We report the synthesis of N-acetoxy-N-(1-methyl-5H-pyrido[4,5-b]indol-3-yl)acetamide, 7, its N-pivaloyloxy analogue, 9, and improved synthesis of indole-2-acetonitrile, 3 (70% in five steps from indole-2-carboxylic acid), the carcinogenic amine Trp-P-2, 4 (40% from 3), and the nitro compound, 5 (40% from 4 by oxidation with H₂O₂ using Mo(CO)₆ catalyst). In aqueous solution at neutral pH, 7 primarily undergoes C-O bond cleavage to yield the hydroxamic acid, 8, but under the same conditions the sterically hindered 9 decomposes predominately by N-O bond cleavage with a pH independent rate constant that is 7.5-fold smaller than that for 7. In the pH range 0.5-7.0 three different processes for the decomposition of 9 were detected by kinetics. Only the process that dominates at neutral pH generates a nitrenium species that can be trapped by N₃⁻.     

Effect of phase ratio on van't Hoff analysis in reversed-phase liquid chromatography,and phase-ratio-independent estimation of transfer enthalpy

In analysis of the thermodynamics of the transfer of a solute from the mobile phase to the stationary phase in reversed-phase liquid chromatography, it is nearly always assumed that the phase ratio is constant. This type of analysis is typically performed by applying a form of the van't Hoff equation, which relates the retention factor to temperature via the enthalpy and entropy of transfer. When non-linear van't Hoff plots are observed, it is often assumed that the enthalpy and entropy of transfer change with temperature. However, when the possibility of a change in the phase ratio is considered, it becomes apparent that non-linear van't Hoff behavior may or may not be due to changes in enthalpy or entropy. In this work, we present mathematical evidence that phase ratio changes, if they occur, can cause deviations from linearity in a van't Hoff plot. We also show that the phase ratio influence can be eliminated by considering the molecular difference between two solutes instead of the solutes themselves. The resulting selectivity van't Hoff plots may be linear, even when the van't Hoff plots of the two solutes are non-linear. In such cases, temperature-dependent phase ratio changes, and not necessarily changes in the transfer enthalpy, may be responsible for the curved van't Hoff plots of the individual solutes. In addition, we present chromatographic evidence that different solutes may "see" different thermodynamic phase ratios. It is clear that the concept of a phase ratio in reversed-phase chromatography is not nearly as well defined as a phase ratio in a bulk system like a liquid-liquid extraction.     

Electrically actuated, pressure-driven microfluidic pumps

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.     

Improved method for the determination of the major neutral steroids and unconjugated bile acids in human faeces using capillary gas chromatography

An improved method has been developed for the determination of the major neutral steroids (cholesterol and 5 beta-cholestan-3 beta-ol) and unconjugated bile acids (deoxycholic acid and lithocholic acid) in human faeces, using capillary gas chromatography with flame ionization detection. The freeze-dried faecal sample was subjected to a two-stage Soxhlet extraction followed by an aqueous alkali-organic solvent partition step to separate neutral steroids from bile acids. The neutral steroids were analysed as their trimethylsilyl ether derivatives on an OV-1 capillary column. The bile acids were further purified on a Sep-Pak C18 cartridge and then fractionated on a Sep-Pak SIL cartridge. Unconjugated bile acids were analysed as their methyl ester-trimethylsilyl ether derivatives also on an OV-1 capillary column. Quantitation of neutral steroids and unconjugated bile acids was achieved by reference to appropriate internal standards, added to the faecal extract immediately after the Soxhlet extraction stage. The method is being used in a study of the effect of diet on the metabolic activity of human gut flora.     

Front Cover: Enhancement of dielectrophoresis-based particle collection from high conducting fluids due to partial electrode insulation

Dielectrophoresis (DEP) is a successful method to recover nanoparticles from different types of fluid. The DEP force acting on these particles is created by an electrode microarray that produces a nonuniform electric field. To apply DEP to a highly conducting biological fluid, a protective hydrogel coating over the metal electrodes is required to create a barrier between the electrode and the fluid. This protects the electrodes, reduces the electrolysis of water, and allows the electric field to penetrate into the fluid sample. We observed that the protective hydrogel layer can separate from the electrode and form a closed domed structure and that collection of 100 nm polystyrene beads increased when this occurred. To better understand this collection increase, we used COMSOL Multiphysics software to model the electric field in the presence of the dome filled with different materials ranging from low-conducting gas to high conducting phosphate-buffered saline fluids. The results suggest that as the electrical conductivity of the material inside the dome is reduced, the whole dome acts as an insulator which increases electric field intensity at the electrode edge. This increased intensity widens the high-intensity electric field factor zone resulting in increased collection. This informs how dome formation results in increased particle collection and provides insight into how the electric field can be intensified to the increase collection of particles. These results have important applications for increasing the recovery of biologically-derived nanoparticles from undiluted physiological fluids that have high conductance, including the collection of cancer-derived extracellular vesicles from plasma for liquid biopsy applications.