Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of crack tip sharpness on the strength of vulcanized rubbers

The effect of crack tip sharpness on crack propagation in vulcanized rubbers has been studied. For very sharp cracks, tearing is found to occur on a small scale at very low energies not far above the threshold required for the onset of mechanical crack growth. The “small-scale” tearing energies show relatively little variation for rubbers that differ widely in tear strength as normally measured. Thus the latter property appears to be strongly influenced by variations in the ability of rubbers to promote tip blunting. The small-scale tear behavior is of relevance to other fracture phenomena, including cutting by sharp objects and tensile failure. Natural variations in tip sharpness occur during cyclic or time-dependent mechanical crack growth and influence the form of the crack growth characteristics.     

Voltage ‐ Current Study of an Atmospheric Dielectric Barrier Discharge

The discharge behaviour of an atmospheric dielectric barrier parallel plate discharge, used for surface treatment, is studied. Since an uniform plasma is preferable for surface treatment, filaments must be avoided in the discharge. The occurrence of filaments can be detected by measuring the current flowing through the discharge. Current and voltage measurements give an indication of the power consumption by the plasma. The power consumption of the plasma as function of the applied frequency is examined. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characteristics of thermoradiative destruction of BaS2O6·2H2O

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 55, No. 4, pp. 613–618, October, 1991.     

Ion structure determinations and ion—molecule reactions by double quadrupole mass spectrometry

The QQ mass spectrometer is shown to be applicable to ion structure determination via collision-induced dissociations of mass-selected ions. The instrument can be scanned so as to record the products of dissociation as well as those of ion—molecule association reactions. The dissociations correspond to those observed at high kinetic energy in mass-analyzed ion kinetic energy spectrometers and the association reactions show parallels with reactions seen in ion cyclotron resonance spectroscopy and in high-pressure mass spectrometry     

New hearing threshold measurements for pure tones under free-field listening conditions.

Hearing thresholds for pure tones were measured under free-field listening conditions in the frequency range of 40 Hz-15 kHz. Results are consistent with the standard threshold specified in ISO 226 for frequencies up to 250 Hz, but a few dB below the ISO curve at higher frequencies. Thresholds are distributed normally on a logarithmic level scale with a standard deviation of approximately 5 dB. No significant differences between thresholds of male and female subjects were observed.     

Molecular orbital momentum distributions and binding energies for nitric oxide

Binding energy spectra of the valence electrons of the open shell molecule NO have been obtained up to 55 eV at azimuthal angles of 0° and 7° using binary (e, 2e) spectroscopy at an impact energy of 1200 eV. The momentum distribution has been obtained for the least tightly bound (unpaired) electron, removal of which leads to formation of the X ¹Σ⁺ ground state of NO⁺. Momentum distributions have also been measured at 21.0 and 40.5 eV. The measured momentum distributions are compared with several literature wavefunctions of varying complexity. They are found to be in excellent agreement with those calculated using the natural spin orbital wavefunctions of Kouba and Ohrn.