Electro-optic properties of thiol-ene polymer stabilized ferroelectric liquid crystals

Electro-optic properties of polymer stabilized ferroelectric liquid crystal (PSFLC) systems are examined as a function of varying concentrations of either a linear or crosslinked thiol-ene polymer. The thiol-ene method of polymer stabilization is a drastic change from previous studies designed to avert the problem of polymer phase separation. FLC rise time and tilt angle measurements were used to determine the effects of the polymer network on the optical properties of the system. The addition of monomer impurities to both systems demonstrated a reduction in tilt angle, which translated into decreased switching speeds in both systems prior to polymerization. The crosslinked thiol-ene system showed increased switching times due to the creation of polymer in the interlayer spacing of the FLC, but exhibited minimal increase in the rotational viscosity of the system. In addition, the crosslinked polymer systems resulted in an increase in the liquid crystalline order, which produced an increase in the contrast ratio of the system. The linear polymer system showed drastically different results as compared with the crosslinked system. The rise time and tilt angle measurements decreased upon polymerization of the linear thiol-ene and the rotational viscosity and contrast ratio values also decreased. We suggest that the linear thiol-ene polymer phase separation from the interlayer spacing leads to a microscopic misalignment of the FLC molecules, causing a decrease in the optical properties of the LC.     

Controlled Variable Oxidative Doping of Individual Organometallic Nanoparticles

The charging and controlled oxidative doping of single organometallic ferrocene nanoparticles is reported in aqueous sodium tetrafluoroborate using the nano‐impacts method. It is shown that ferrocene nanoparticles of approximately 105 nm diameter are essentially quantitatively oxidatively doped with the uptake of one tetrafluoroborate anion per ferrocene molecule at suitably high overpotentials. By using lower potentials, it is possible to achieve low doping levels of single nanoparticles in a controlled manner.     

High-rate and high-density gas separation adsorbents and manufacturing method

High-rate and high-density gas separation adsorbents used in vacuum pressure swing adsorption (VPSA) processes are described. Agglomerated zeolite Li–LSX compositions made using colloidal silica binding agents and having improved nitrogen pore diffusivity compared to like compositions prepared with traditional clay binders, are also described. Preparation methods for the colloidal silica-bound adsorbents are described together with their characterization by mercury (Hg) porosimetry, scanning electron microscopy (SEM) and low dead-volume breakthrough testing, from which the pore diffusivity is obtained. In this article, we show how the location and dispersion of the colloidal silica binding agent within the agglomerated zeolite particle yields pore-architectures that resemble “state-of-the-art” binderless adsorbents. In addition, we use VPSA process simulations to show that the best process performance is achieved by the combination of high-rate and high-density adsorbent properties.     

Surface correlations of hydrodynamic drag for transitionally rough engineering surfaces

Rough surfaces are usually characterised by a single equivalent sand-grain roughness height scale that typically needs to be determined from laboratory experiments. Recently, this method has been complemented by a direct numerical simulation approach, whereby representative surfaces can be scanned and the roughness effects computed over a range of Reynolds number. This development raises the prospect over the coming years of having enough data for different types of rough surfaces to be able to relate surface characteristics to roughness effects, such as the roughness function that quantifies the downward displacement of the logarithmic law of the wall. In the present contribution, we use simulation data for 17 irregular surfaces at the same friction Reynolds number, for which they are in the transitionally rough regime. All surfaces are scaled to the same physical roughness height. Mean streamwise velocity profiles show a wide range of roughness function values, while the velocity defect profiles show a good collapse. Profile peaks of the turbulent kinetic energy also vary depending on the surface. We then consider which surface properties are important and how new properties can be incorporated into an empirical model, the accuracy of which can then be tested. Optimised models with several roughness parameters are systematically developed for the roughness function and profile peak turbulent kinetic energy. In determining the roughness function, besides the known parameters of solidity (or frontal area ratio) and skewness, it is shown that the streamwise correlation length and the root-mean-square roughness height are also significant. The peak turbulent kinetic energy is determined by the skewness and root-mean-square roughness height, along with the mean forward-facing surface angle and spanwise effective slope. The results suggest feasibility of relating rough-wall flow properties (throughout the range from hydrodynamically smooth to fully rough) to surface parameters.