Quantitative sphingosine measurement as a surrogate for total ceramide concentration—preclinical and potential translational applications

Biomarkers are an increasingly important constituent of the drug development process, offering the potential of increased efficiency through reduced compound attrition and earlier proof of mechanism and/or efficacy. Assays developed for compound screening that can be directly translated for clinical trials are especially valuable, but their successful adoption requires a careful balance between assay performance and implementation costs. One such ‘fit‐for‐purpose’ biomarker assay, the indirect measurement of pharmacological modulation of sphingolipid biosynthesis and disposition, is presented here. Among spingolipids, numerous ceramide species are readily detectable in different lipoprotein fractions of mammalian plasma, but their parallel quantification can be prohibitively expensive and time consuming. Ceramides differ in their fatty acid moiety, which is readily removed by hydrolysis, yielding a common sphingosine derivative, the measurement of which serves as an indicator of total ceramide. When followed by liquid chromatography tandem mass spectrometry (LC/MS/MS) for detection, robust analyte quantification becomes relatively straightforward. The practical utility of a method developed to be fit for the purpose of rapidly and quantitatively measuring treatment‐induced variations in total ceramide from hamster plasma and individual lipoprotein fractions is described. With a linear calibration range from 0.003 to 33.4 μm sphingosine, precision and accuracy error in plasma‐based quality controls spiked with ceramides was less than 15%. The specificity of the assay for ceramides was also assessed. The simplicity of the method would allow for its potential translation to other preclinical species, as well as for clinical applications in later‐stage drug development. Copyright © 2009 John Wiley & Sons, Ltd.     

Cathodic stripping voltammetric determination of selenium(IV) at a thin-film mercury electrode in a thiocyanate-containing electrolyte

The well-known method for the determination of selenium(IV), which is based on the cathodic stripping voltammetry of copper(I) selenide, has been adapted for application at the thin-film mercury electrode on glassy carbon (TFME). Insufficient reproducibility and sensitivity have been overcome by using a 0.1 mol/L HClO₄ electrolyte solution containing 0.02 mol/L thiocyanate ions. Thiocyanate ions have been found to increase the peak height of the selenium response and shift it to more positive potentials. This behaviour is explained by an adsorption of SCN^– at the interface glassy carbon/Cu₂Se and its action as an electron transfer catalyst between glassy carbon and copper(I) selenide. A 3σ-detection limit of 75 ng/L Se^(IV) has been achieved. The relative standard deviation is 5.2% at 5 μg/L selenium(IV). The influence of cadmium(II), arsenic(III), zinc(II), iron(III) and lead(II) ions on the selenium response has been studied. In case of lead ions, a new signal occurred at more negative potentials than the reduction of Cu₂Se. This signal, which is probably due to the reduction of PbSe, can also be used for the determination of selenium(IV). Received: 13 November 1996 / Revised: 19 December 1996 / Accepted: 24 December 1996     

A study of Src SH2 domain protein-phosphopeptide binding interactions by electrospray ionization mass spectrometry

The noncovalent binding of various peptide ligands to pp60^src (Src) SH2 (Src homology 2) domain protein (12.9 ku) has been used as a model system for development of electrospray ionization mass spectrometry (ESI-MS) as a tool to study noncovalently bound complexes. SH2 motifs in proteins are critical in the signal transduction pathways of the tyrosine kinase growth factor receptors and recognize phosphotyrosine-containing proteins and peptides. ESI-MS with a magnetic sector instrument and array detection has been used to detect the protein-peptide complex with low-picomole sensitivity. The relative abundances of the multiply charged ions for the complex formed between Src SH2 protein and several nonphosphorylated and phosphorylated peptides have been compared. The mass spectrometry data correlate well to the measured binding constants derived from solution-based methods, indicating that the mass spectrometry-based method can be used to assess the affinity of such interactions. Solution-phase equilibrium constants may be determined by measuring the amount of bound and unbound species as a function of concentration for construction of a Scatchard graph. ESI-MS of a solution containing Src SH2 with a mixture of phosphopeptides showed the expected protein-phosphopeptide complex as the dominant species in the mass spectrum, demonstrating the method’s potential for screening mixtures from peptide libraries.     

Five-component food-grade microemulsions: structural characterization by SANS

In this paper we present the structural characterization of a five-component food-grade microemulsion containing Tween 80, R(+)-limonene, ethanol, glycerol, and water. Our main approach to investigating the microstructure of dense microemulsions, and how it can be influenced by the various components, was to employ small-angle neutron scattering and the new evaluation technique for dense, interacting systems, the Generalized Indirect Fourier Transformation. We started our investigation with the impact of glycerol and ethanol on Tween 80 micelles in water. We found that glycerol increases the aggregation number and withdraws the hydrating agents from the headgroup region of the surfactant, resulting in a higher packing density of molecules in a micelle at slightly increasing size. The same trend holds when the micelles are oil swollen and/or ethanol is present. Ethanol, on the other hand, redistributes mainly between water and the interface-headgroup region of the surfactant. Part of it replaces surfactant molecules in the micelles, which increases the available interface and results in a higher number of micelles with shrinking size. The same trend holds when the micelles are oil swollen and/or glycerol is present in the aqueous phase. We also investigated samples along the dilution of a mixture of surfactant and oil phase (R(+)-limonene and ethanol), which can be diluted with aqueous phase (mixture of water and glycerol) without the occurrence of phase separation. In some samples of this dilution most probably bicontinuous structures are present. To elucidate this point, we also employed dynamic light scattering, viscosity, and conductivity measurements.     

Novel conductive characteristics of ITO:Ti films deposited by spin coating from colloidal precursor

Transparent semiconducting ITO:Ti thin films, prepared by a sol–gel process, has been deposited by spin-coating technique onto alkali-free glass substrates. The as-coated films were annealed in ambient air at 550 °C for 1 h and further annealed in a reducing atmosphere. The influences of the Ti content in the sol on the surface morphology, microstructure, optical properties and electrical resistivity have been investigated. These properties were found to depend on the Ti content in the coating sol. Ti addition led to dense smooth layers with larger crystallite size (20–30 nm). Double layers synthesized with Ti:ITO = 0.53 wt% and submitted to reducing treatment in forming gas exhibited the lowest sheet resistance R_□ = 60 Ω_□ with an average transmittance of 87% at 550 nm.     

Nuclear magnetic resonance investigation of dynamics in poly(ethylene oxide)-based lithium polyether-ester-sulfonate ionomers

Nuclear magnetic resonance spectroscopy has been utilized to investigate the dynamics of poly(ethylene oxide)-based lithium sulfonate ionomer samples that have low glass transition temperatures. (1)H and (7)Li spin-lattice relaxation times (T(1)) of the bulk polymer and lithium ions, respectively, were measured and analyzed in samples with a range of ion contents. The temperature dependence of T(1) values along with the presence of minima in T(1) as a function of temperature enabled correlation times and activation energies to be obtained for both the segmental motion of the polymer backbone and the hopping motion of lithium cations. Similar activation energies for motion of both the polymer and lithium ions in the samples with lower ion content indicate that the polymer segmental motion and lithium ion hopping motion are correlated in these samples, even though lithium hopping is about ten times slower than the segmental motion. A divergent trend is observed for correlation times and activation energies of the highest ion content sample with 100% lithium sulfonation due to the presence of ionic aggregation. Details of the polymer and cation dynamics on the nanosecond timescale are discussed and complement the findings of X-ray scattering and quasi-elastic neutron scattering experiments.     

Novel Copolymers of 4-Fluorostyrene. 3. Some Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH=C(CN)₂ (where R is 4-dimethylamino, 4-diethylamino, 3-phenoxy, 3-benzyloxy, 4-benzyloxy, 4-acetoxy, 2-cyano, 3-cyano, and 4-cyano) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-benzyloxy (2.9) > 4-cyano (2.7) > 3-phenoxy (1.9) > 4-acetoxy (1.8) > 3-cyano (1.7) > 2-cyano (1.6) > 4-benzyloxy (0.6) > 4-dimethylamino (0.4) = 4-diethylamino (0.4). High T _g of the copolymers, in comparison with that of poly (4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposition in 400–800°C range.