Resonance effects in the nonadiabatic nonlinear quantum dimer

In the presence of 1/f ^β noise, we investigate the logical stochastic resonance (LSR) in an asymmetric bistable model driven by various cycling combinations of two logic inputs. The probability of correct logic outputs is calculated according to true table of logic relationships. Two major results are presented. Firstly, it is shown that the LSR effect can be obtained by changing noise strength. Over entire range of noise variance, white noise can be considered to be better than 1/f noise or 1/f ² noise to obtain clean logic operation. At a smaller noise level, 1/f noise can realize higher output probability than white noise or 1/f ² noise. In the sense, 1/f noise can be considered to be better than white noise or 1/f ². On the other hand, the correct probability can evolves nonmonotonically as noise exponent β increases, and a kind of SR-like effect can be obtained as a result of β. At certain intermediate noise variance, the output probability is able to attain its minimum at β = 1. It is also shown that actually some finite β sometime can be better than β = 0 at small range of noise variance. The study might provide some potential complement to LSR effect in the presence of 1/f ^β noise.     

Synthesis and characterization of β-Ga2O3 nanostructures grown on GaAs substrates

β-Ga₂O₃ nanostructures including nanowires, nanoribbons and nanosheets were synthesized via thermal annealing of gold coated GaAs substrates in N₂ ambient. GaAs substrates with different dopants were taken as the starting material to study the effect of doping on the growth and photoluminescence properties of β-Ga₂O₃ nanostructures. The nanostructures were investigated by Grazing Incident X-ray Diffraction, Scanning Electron Microscopy, Transmission Electron Microscopy, Energy Dispersive X-ray Spectroscopy, room temperature photoluminescence and optical absorbance. The selected area electron diffraction and High resolution-TEM observations suggest that both nanowires and nanobelts are single crystalline. Different growth directions were observed for nanowires and nanoribbons, indicating the different growth patterns of these nanostructures. The PL spectra of β-Ga₂O₃ nanostructures exhibit a strong UV-blue emission band centered at 410 nm, 415 nm and 450 nm for differently doped GaAs substrates respectively. A weak red luminescence peak at 710 nm was also observed in all the samples. The optical absorbance spectrum showed intense absorption features in the UV spectral region. The growth and luminescence mechanism in β-Ga₂O₃ nanostructures are also discussed.     

Dielectric relaxation in polyvinylidenefluoride–polysulfone blends

Dielectric properties of polymer blend of polyvinylidenefluoride (PVDF) and polysulfone (PSF) of different wt. % have been studied to understand the molecular motion and their relaxation behavior in the frequency range of 100 Hz to 10 kHz at different temperatures between 30 and 190 °C. The dielectric constant of the blend decreased with frequency and increased with the increasing temperature and PSF content in the blend. The magnitude of dielectric loss also increased with increase in temperature and PSF content. The observed characteristic has been consistently explained in terms of dipolar motions and the plasticization effect brought about by blending of PSF with PVDF. At constant frequency and temperature, the blend follows a linear relationship between logarithm of their dielectric constant and different ratios of blend. The appearance of a peak for each concentration in dielectric loss suggests the presence of relaxing dipoles in the blend. In addition of PSF with PVDF, the peak shifts toward higher frequency side suggesting the speed up the relaxation process. AC dielectric data is also combined with thermally stimulated depolarization current (TSDC) data which is generally studied for low-frequency dielectric properties of polymers blends so as to produce the results in a wide frequency range. The glass transition temperature (T_g) of the blend was studied by differential scanning calorimetric technique (DSC), the T_g was compared and correlated with TSDC peak. The blend samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) to study the formation of blend and micro structural properties of the materials. The shifting of peak toward lower diffraction angle side confirms the reduction in particle size with increasing amorphous content in the blend.     

An efficient evolutionary multi-objective framework for MEMS design optimisation: validation, comparison and analysis

The application of multi objective evolutionary algorithms (MOEA) in the design optimisation of microelectromechanical systems (MEMS) is of particular interest in this research. MOEA is a class of soft computing techniques of biologically inspired stochastic algorithms, which have proved to outperform their conventional counterparts in many design optimisation tasks. MEMS designers can utilise a variety of multi-disciplinary design tools that explore a complex design search space, however, still follow the traditional trial and error approaches. The paper proposes a novel framework, which couples both modelling and analysis tools to the most referenced MOEAs (NSGA-II and MOGA-II). The framework is validated and evaluated through a number of case studies of increasing complexity. The research presented in this paper unprecedentedly attempts to compare the performances of the mentioned algorithms in the application domain. The comparative study shows significant insights into the behaviour of both of the algorithms in the design optimisation of MEMS. The paper provides extended discussions and analysis of the results showing, overall, that MOGA-II outperforms NSGA-II, for the selected case studies.     

Nafion-multi-walled Carbon Nanotubes Supported Tris(bipyridyl)iron(II) for Nicotine Detection

This work reports an electrochemical sensing framework for nicotine determination based on glassy carbon electrode (GC) immobilized with Fe(bpy)₃²⁺ (where bpy is 2,2’-bipyridyl) supported by Nafion and multi-walled carbon nanotubes (Nf-MWCNTs). Fe(bpy)₃²⁺ immobilized Nf-MWCNTs modified GC (GC/Nf-MWCNTs/Fe(bpy)₃²⁺) manifests stable redox peaks, characteristics of Fe(bpy)₃²⁺. The GC/Nf-MWCNTs/Fe(bpy)₃²⁺ exhibits effective electrochemical oxidation of nicotine, diminishing the overpotential relative to GC/Nf-MWCNTs. The limit of detection is 0.1 μM (experimentally observed) with two different linear calibration ranges between 0.1 to 600 μM and 600 to 3000 μM. Electrocatalytic responses observed at GC/Nf-MWCNTs/Fe(bpy)₃²⁺ indicate superior performance for nicotine determination with acceptable selectivity, stability, and reproducibility. Additionally, the nicotine present in real samples such as beedi and tobacco are also analyzed with satisfactory recovery percentages.     

Formation of aligned ZnO nanorods on self-grown ZnO template and its enhanced field emission characteristics

We report a novel method for producing aligned ZnO nanorods (ANR) on self-grown ZnO template in a single step process involving growth of ZnO by vapor transport, followed by quenching of growing ZnO flux in liquid nitrogen. In the present study Zn powder turns into ZnO sheet under oxygen flow at ∼900 °C and bottom surface of the sheet acts as template for the growth of ANR. It is revealed from XRD and EDAX analysis that the bottom of the sheet is Zn rich region and acts as self catalyst for the growth of ANR. The grown nanorods have length up to several tens of micrometers with diameters ranging from ∼100 to 150 nm. Microstructural analysis of ANR indicates the fractal like configuration. The field emission properties have been investigated for ANR with fractal geometry using the ANR on self-grown ZnO template as a cathode directly. The turn-on electric field required to draw current density of ∼1.0 μA/cm² has been found to be ∼0.98 V/μm. The field enhancement factor based on Fowler-Nordheim (F-N) plot was found to be ∼7815 for ANR. The fractal geometry of ANR has been shown to be advantageous for achieving improved field emission features. The present investigations of synthesis involving formation of ANR over self-grown ZnO template, together with fractal configuration of the as-synthesized ANR, are first of their type.     

Configuration-selective spectroscopic studies of Er3+ centers in ErSc2N@C80 and Er2ScN@C80 fullerenes

Low temperature photoluminescence (PL) and photoluminescence excitation (PLE) spectroscopy of high purity ErSc(2)N@C(80) and Er(2)ScN@C(80) fullerenes reveal at least two metastable configurations of the Er(3+) ion within the cage, consistent with previous observations from x-ray diffraction. Using PLE measurements at a number of different emission wavelengths we have characterized the ground state, (4)I(152), and the first excited state, (4)I(132), of the various Er(3+) configurations and their crystal-field splitting. We present detailed energy level diagrams for the ground and excited states of the two dominant configurations of ErSc(2)N@C(80) and Er(2)ScN@C(80).     

Microdetermination of indoles with N-bromoacetamide in acetic acid medium

Summary A titrimetric method for the microdetermination of indole and its derivatives withN-bromoacetamide is described. It has been observed thatN-bromoacetamide brominates the compound containing indole nucleus in the presence of acetic acid. The usual reaction time is 15 minutes and the reaction is carried out at room temperature. The relative errors are less than ±1.5% at the mg level.

---

Zusammenfassung Die maßanalytische Bestimmung von Indol und seinen Derivaten mitN-Bromacetamid wurde beschrieben. Dieses Reagens bromiert in Gegenwart von Essigsäure indolhältige Verbindungen innerhalb 15 min bei Zimmertemperatur. Der rel. Fehler ist geringer als ±1,5%.

     

Thermoluminescence studies of UV-irradiated Y2O3:Eu3+ doped phosphor

The present paper reports thermoluminescence (TL) glow curves of Eu³⁺-doped Y₂O₃ phosphor with different ultraviolet (UV) exposure times. The glow peak shows second-order kinetics of Eu³⁺-doped Y₂O₃, and corresponding kinetic parameters were evaluated using the peak shape method. Calculations of trap depth were carried out using different methods. The kinetics order, activation energy, and frequency factor were calculated. The recorded glow curve shifts towards higher intensity with longer UV exposure. The heating rate used for recording TL was 3.0 °C s^?1. Particle size and structure were verified by X-ray diffraction (XRD) pattern and morphology by scanning electron microscopy (SEM) imaging.