Covalently closed microemulsions in presence of triblock terpolymers

This paper is focused on the influence of polystyrene (PS)-poly(1,4-butadiene) (PB)-poly(ethylene oxide) (PEO) triblock terpolymers on the w/o microemulsion of the pseudo-ternary system water/sodium dodecylsulfate (SDS)/xylene-pentanol. Despite the insolubility of the copolymer in water as well as in the xylene-pentanol mixture, it can be incorporated into the w/o microemulsion and interactions between the triblock terpolymer molecules and the anionic surfactant headgroups can be detected by differential scanning calorimetry (DSC) measurements. Furthermore, dynamic light scattering measurements were used to determine the aggregate diameter of the modified microemulsions. For lower polymer concentrations large aggregates between 100 and 500 nm can be observed. Surprisingly, at a higher terpolymer concentration of 5 wt%, significant smaller aggregate diameters can be identified by dynamic light scattering and Cryo-SEM. One can conclude that the copolymers are incorporated in the inverse microemulsion droplets, where the PB blocks cover the water droplets. The thermally induced radical cross-linking of the butadiene units in the presence of azobisisobutyronitrile (AIBN) leads then to covalently closed nanocapsules with an average size of 10 nm.     

Novel Hyperbranched Poly([1,2,3]‐triazole)s Derived from AB2 Monomers by a 1,3‐Dipolar Cycloaddition

Summary: Novel hyperbranched poly([1,2,3]‐triazole)s were synthesized from several AB₂ monomers by a 1,3‐dipolar cycloaddition reaction. The compound 3,5‐bis(propargyloxy)benzyl azide was polymerized thermally at room temperature leading to 1,4‐ and 1,5‐disubstituted poly([1,2,3]‐triazole) and catalytically leading only to the 1,4‐disubstituted poly([1,2,3]‐triazole). Only the thermal reaction led to fully soluble products. The AB₂ monomers containing an internal alkyne A unit could be autopolymerized thermally under mild reaction conditions leading to soluble, high‐molecular‐weight hyperbranched poly([1,2,3] triazole)s. All products were characterized by detailed NMR investigations.

Synthesis route for polymers 8a and 8b .     

MIC-SSMS analyses of eight new geological standard glasses

To obtain suitable geological reference materials for microanalytical purposes, a set of eight natural glasses was prepared by direct fusion of rock chips. Multi-ion counting spark source mass spectrometry (MIC-SSMS) has been applied for trace element analysis of these reference materials. The overall analytical uncertainty of the MIC-SSMS results was determined by considering 14 possible sources of errors. It generally ranges between < 2–7% depending on the element and its concentration. Nearly all MIC-SSMS data agree with the reference values within 0–10%, indicating that the estimate of the overall analytical uncertainty is reasonable. Received: 21 December 1998 / Revised: 2 March 1999 / Accepted: 3 March 1999     

Hyperbranched thermolabile polycarbonates derived from a A2+B3 monomer system

Hyperbranched polycarbonates were synthesized successfully via the A₂ + B₃ route by the reaction of a bis(carbonylimidazolide) with triethanolamine. These polymers containing the carbonate group as thermolabile moiety are decomposing into volatile products at around 200°C. The polymers were characterized with ¹H/¹³C NMR spectroscopy, SEC, DSC and TGA techniques.     

Preparation and properties of thin films of hyperbranched polyesters with different end groups

Hyperbranched polyesters (HBP) with different end groups were prepared as thin films. They were characterized with regard to their chemical composition, thickness, optical constants and morphology using infrared spectroscopy, spectroscopic ellipsometry, and atomic force microscopy. The surface properties of the films were determined by zeta‐potential and contact angles measurements. The differences in the molecular structure and surface energetic and acid‐base properties between HBP materials with carboxylic, hydroxy and acetoxy end groups result in differences in their swelling behavior in atmospheric humidity. The swelling behavior at different atmospheric humidity was observed in situ using spectroscopic ellipsometry and reflectometric interference spectroscopy. From the results it can be concluded that HBP films can be used potentially as sensoric materials.     

Pniktogenidostannate(IV) mit isolierten Tetraeder‐Anionen: Neue Vertreter (E1)4(E2)2[Sn(E15)4] (mit E1 = Na,K; E2 = Ca,Sr, Ba; E15 = P,As, Sb,Bi) vom Na6[ZnO4]‐Typ und die Überstrukturvariante von K4Sr2[SnAs4]

Pnictogenidostannates(IV) with Discrete Tetrahedral Anions: New Representatives (E1)₄(E2)₂[Sn(E15)₄] (with E1 = Na, K; E2 = Ca, Sr, Ba; E15 = P, As, Sb, Bi) of the Na₆[ZnO₄] Type and the Superstructure Variant of K₄Sr₂[SnAs₄] The silvery to dark metallic lustrous compounds (E1)₄(E2)₂[Sn(E15)₄] (E1 = Na, K; E2 = Ca, Sr, Ba; E15 = P, As, Sb, Bi) were prepared from melts of stoichiometric mixtures of the elements. They crystallize in the Na₆[ZnO₄]‐type structure (hexagonal, space group: P6₃mc, Z = 2; Na₄Ca₂[SnP₄]: a = 938.94(7), c = 710.09(8) pm; K₄Sr₂[SnAs₄]: a = 1045.0(2), c = 767.0(1) pm; K₄Ba₂[SnP₄]: a = 1029.1(6), c = 780.2(4) pm; K₄Ba₂[SnAs₄]: a = 1051.3(1), c = 795.79(7) pm; K₄Ba₂[SnSb₄]: a = 1116.9(2), c = 829.2(1) pm; K₄Ba₂[SnBi₄]: a = 1139.5(2), c = 832.0(2) pm). The anionic partial structure consists of tetrahedra [Sn(E15)₄]^8– orientated all in the same direction along [001]. In the cationic partial structure one of the two cation positions is occupied statistically by alkali and alkaline earth metal atoms. Up to now only for K₄Sr₂[SnAs₄] a second modification could be isolated, forming a superstructure type with three times the unit cell volume (hexagonal, space group: P6₃cm, Z = 6; a = 1801.3(2), c = 767.00(9) pm) and an ordered cationic partial structure.     

Electron‐beam initiated polymerization of acrylate compositions, 2. Simulation of thermal effects in thin films

The thermal effects taking place during the electron beam‐induced polymerization of acrylate type formulations were numerically simulated on the basis of the general heat equation applied to a one‐dimensional system. The nature, the dimensions and the environment of the polymerizing medium were defined for representing the actual conditions of kinetic experiments performed with a 175 kV laboratory accelerator and FTIR monitoring. The modeled system was constituted of a polymerizable composition coated onto a NaCl plate, initially at 20°C in gaseous nitrogen at the same constant temperature, with or without a PET film covering the reactive layer. Polymerization profiles describing the progress of the reaction as a function of dose were modeled on a phenomenological basis from actual data obtained by discontinuous FTIR monitoring of typical epoxy acrylate or polyurethane acrylate compositions. The influence of the reactive layer thickness (10/100 μm), dose rate (10–110 kGy·s^–1), maximum polymerization heat (200–400 J·g^–1) on the temperature‐time variations was examined for continuous irradiation. In spite of the relatively small thickness of the reactive layer, significant temperature rise is simulated when heat production is large and fast compared to energy dissipation at the reactive layer boundaries. The obtained data substantiate the fact that upon fractionated EB‐treatment with small dose increments (down to 0.6 kGy per pass) at low dose rate (down to 10 kGy·s^–1) the heat release can be considered weak and without noticeable influence on the conversion data processed for a detailed kinetic analysis. For example, a maximal temperature rise of 6°C was calculated for a fractionated irradiation of 2 kGy increments at 19 kGy·s^–1 applied to a polymerizable formulation releasing a maximum enthalpy of 300 J·g^–1.     

Synthesis of oxazoline functionalized polypropene using metallocene catalysts

Using two different zirconocene/MAO catalyst systems, propene was copolymerized with the comonomers 2‐(9‐decene‐1‐yl)‐1,3‐oxazoline and 2‐(4‐(10‐undecene‐1‐oxo)phenyl)‐1,3‐oxazoline, respectively. The catalysts used were rac‐Et[Ind]₂ZrCl₂ and rac‐Me₂Si[2‐Me‐4, 5‐BenzInd]₂ZrCl₂. Up to 0.53 mol‐% oxazoline could be incorporated into polypropene. Oxazoline content, molecular weight, degree of isotacticity and melting behavior were dependent on the catalyst system, comonomer structure and comonomer concentration in the feed.     

Lattice Monte Carlo investigations on copolymer systems, 1. Diblock copolymers

Symmetric diblock copolymers in dilute solution were examined by means of Monte Carlo simulations on a cubic lattice with respect to chain- and block dimensions, shape, local structure and number of contacts. The solvent was either a common good one, a common θ-solvent or a selective one for the two blocks. In all cases, repulsive interactions are operative between the blocks. In addition, the underlying homopolymers (athermal and θ) were divided into two parts (and treated as a block copolymer) for comparison. Chain-length was varied from 40 to 1280 segments leading to the expected values for the critical exponent 2v ≈ 1.2 for good solvent quality and 2v ≈ 1.0 for θ-solvent. Copolymers in a selective solvent scale with an intermediate exponent, 2v ≈ 1.13. The deviation of the mean squared dimensions of the copolymers from the sum of those of two homopolymers of the same length and for the same solvent quality as the blocks is largest for block copolymers in a common θ-solvent (where it exceeds 20%), while the blocks themselves have mostly the same dimensions as their underlying homopolymers of equal length. The shape of the copolymers, expressed by the parameter δ (asphericity) becomes more rod-like with increasing chain-length if there are (compact) θ-blocks in the molecule which are subject to mutual repulsive interaction. In these cases, θ exceeds the value of the homopolymers in the limit of infinite chain-length. The number of contacts per segment approaches a limiting value with increasing chain-length which is ≈0.20 for athermal chains and athermal blocks. For θ-chains and θ-blocks, a limiting value is not yet reached within the range of chainlengths investigated. The number of contacts per segment between two different blocks quickly tends to zero with increasing chain-length.     

Cyclische Phosphidostannat(III)-Anionen [Sn12P24]36– in Sr3[Sn2P4]

Cyclic Phosphidostannate(III) Anions [Sn₁₂P₂₄]^36– in Sr₃[Sn₂P₄] The metallic lustrous, air sensitive compound Sr₃[Sn₂P₄] was prepared from melts of mixtures of the elements. Sr₃[Sn₂P₄] crystallizes in the orthorhombic system, space group Cmca (a = 2510,4(9), b = 1259,3(6), c = 1869,3(8), Z = 24). In the anionic partial structure six moieties [Sn₂P₆] isostructural to Si₂Cl₆ are linked by each four common P-ligands forming cyclic units [Sn₁₂P₂₄]^36–. The strontium cations are octahedrally coordinated by P. The arrangement can be described as a distorted cubic close packing of P^3– in which in an ordered manner ³/₄ of the octahedral vacancies are occupied by Sr²⁺ and ¹/₄ by Sn₂-dumbbells.