An XPS and UPS study of the interaction of oxygen with sodium-dosed Ag(110)

The adsorption of Na and the coadsorption of Na and O₂ on Ag(110) have been studied by XPS and UPS. Adsorption of Na results in a rapid decrease in the work function. Δφ reaching a limiting value of ?2.0 eV at θ_Na = 0.5 and thereafter remaining constant. In the coverage range 0 < θ_Na <1 adsorption of O₂ onto the Na dosed surface always results in an increase in the work function to an almost constant value of Δφ ~ ?1 eV. At the same time the XPS data show that the Na/O stoichiometry of the oxygen saturated surface remains essentially constant and independent of the initial Na dose. Calibration experiments using sodium formate as a standard compound indicate that this surface phase has the stoichiometry Na₂O. For θ_Na > 1 there is a sharp change in behaviour; the work function of the oxygen saturated surface begins to decrease rapidly, and eventually falls below the value for the Na covered surface itself at θ_Na ~ 1.5. The XP spectrum now shows the appearance of a new oxygen peak which increases in intensity as θ_Na increases beyond unity. The UP spectra indicate that the binding energy of the surface orbital derived from Na (3s) is increased by ~6.7 eV as compared with the free atom value, and the emission at ~3 eV below E_F, which is associated with surface oxygen is not greatly affected by the presence of Na. These results are discussed against the background of information already available from LEED, Auger, and thermal desorption studies, and we attempt to give a consistent interpretation of the properties of the system at coverages both below and above one monolayer.     

The CF bond as a tool in the conformational control of amides

The conformation of 2-fluoro-N-(2-fluoroethyl)-propionamide 4 in the solid state indicates the influence of both a β-fluorine-amide gauche effect and an α-fluoroamide effect. The structure reveals the influence of two recently observed stereoelectronic effects associated with the CF bond, which has resulted in the successful prediction of the solid state conformation of amide 4. A gauche relationship (−69.9°) was observed for atoms N(1)C(4)C(5)F and a syn planar (2.0°) relationship was observed for N(1)C(3)C(2)F. The paper demonstrates the predictive power of using the CF bond as a tool in influencing the conformation of amides and peptides.     

pi-stacking interactions in cis-Bisfullerene

Experimental, molecular modeling, and model compound studies suggest that favorable fullerene[60] pi-stacking interactions in the ground state and in syn-transition states account for the high cis stereoselectivities observed in the reactions between C(60) and 6, 13-disubstituted pentacenes.     

Sponge‐Like Behaviour in Isoreticular Cu(Gly‐His‐X) Peptide‐Based Porous Materials

We report two isoreticular 3D peptide‐based porous frameworks formed by coordination of the tripeptides Gly‐L ‐His‐Gly and Gly‐L ‐His‐L ‐Lys to Cu^II which display sponge‐like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H₂O while CO₂ adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbone, can be post‐synthetically modified to produce urea‐functionalised networks by following methodologies typically used for metal–organic frameworks built from more rigid “classical” linkers.     

Shape Selectivity by Guest‐Driven Restructuring of a Porous Material

A flexible metal‐organic framework selectively sorbs para‐ (pX) over meta‐xylene (mX) by synergic restructuring around pX coupled with generation of unused void space upon mX loading. The nature of the structural change suggests more generally that flexible structures which are initially mismatched in terms of fit and capacity to the preferred guest are strong candidates for effective molecular separations.     

RED LIGHT-INDUCED REDUCTION OF A PARTICLE-ASSOCIATED b-TYPE CYTOCHROME FROM CORN IN THE PRESENCE OF METHYLENE BLUE*

Abstract— In the presence of methylene blue, red light causes the reduction of a h-type cytochrome in particulate fractions from corn coleoptiles. Two types of difference spectra for the cytochromes in these fractions are presented: (a) red light-minus-dark in the presence of methylene blue, and (b) dithionite-reduced-minus-oxidized. Comparison of these spectra shows that photoexcited methylene blue selectively reduces a b-type cytochrome which constitutes at most only 30% of the total dithionite-reducible cytochrome present in the most active fractions. The photoreducible cytochrome has an alpha band at room temperature near 557 nm. Bleaching of methylene blue precedes cytochrome reduction under appropriate conditions, suggesting that the photoreduced dye is donating an electron to the cytochrome. This electron transfer does not involve a flavin, at least as judged by the absence of light-induced spectral changes attributable to flavins. Preliminary kinetic studies suggest that EDTA provides the pool of electrons for the reaction. The cytochrome cannot be assigned exclusively either to mitochondria or to endoplasmic reticulum, as judged by its sedimentation properties. These results and the current literature are discussed in the context of the hypothesis that this b-type cytochrome may be involved in the photoreception mechanism for blue and uv light in vivo.     

ToF-SIMS investigation of octadecylphosphonic acid monolayers on a mica substrate

In this paper, time-of-flight secondary ion mass spectrometry (ToF-SIMS) under static conditions was used to investigate self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) formed on freshly cleaved muscovite mica substrates. The coverage of OPA on mica ranged from 20 to 100%, with a film thickness of 1.7+/-0.2 nm, which was determined by atomic force microscopy (AFM) imaging. The relative intensity of the specific secondary ion species associated with the OPA and with the exposed mica substrate exhibited good correlation with surface coverage. An excellent correlation was also observed (R2=0.98) between the relative SIMS [OPA-H]- intensity and the surface carbon concentration (OPA C 1s, in atomic %) from XPS at the prescribed surface coverage. The observation of positive and negative OPA molecular attachment of secondary ions involving the substrate species is discussed in terms of the chemical affinity of the OPA phosphonate headgroup for the cleaved mica surface as well as the sampling depth. In addition, the OPA molecular attachment species formed with the potassium ions on the cleaved mica substrate dominated the positive secondary ion mass spectrum in the high-mass range. A temperature-dependent, ToF-SIMS study employing in situ heating of a 100% coverage OPA monolayer revealed that the molecules begin to diffuse above approximately 80 degrees C, resulting in a decrease in the relative secondary ion yield of the OPA-specific secondary ions. This observation is hypothesized to be due to a decrease in the effective coverage of the substrate by the OPA molecules, which in turn could be due to the formation of multilayers upon heating in an effort to minimize the energy of the system. The interesting behavior of the novel OPA dimer species as a function of temperature is also reported. It was observed that the relative intensity of OPA and the mica-specific secondary ion peak intensities to that of Si (mica substrate) provides an effective means to estimate the change in coverage at elevated temperatures.     

Antibodies with broad specificity to azaspiracids by use of synthetic haptens

The development of general, sensitive, portable, and quantitative assays for the azaspiracid (AZA) class of marine toxins is urgently needed. Use of a synthetic hapten containing rings F-I of AZA to generate antibodies that cross-react with the AZAs via their common C28-C40 domain and use of these antibodies in ELISA and immunoaffinity columns are reported. This approach has many advantages over using intact azaspiracids (AZAs) derived from environmental samples or total synthesis as haptens for antibody development. A derivative of the levorotatory C28-C40 azaspiracid domain (1) was synthesized efficiently using a one-pot Staudinger reduction/intramolecular aza-Wittig reaction-imine capture sequence to form the H-I ring spiroaminal and a double intramolecluar hetero-Michael addition to assemble the F-G ring ketal. Conjugation of the hapten 1 to cBSA and immunization in sheep generated antibodies that recognized and bound to ovalbumin-conjugated 1 in the absence of AZA1. This binding was inhibited by 1 in a concentration-dependent manner. A mixture of AZA1, AZA2, AZA3, and AZA6 caused a degree of inhibition of antibody binding consistent with its total AZA content, rather than just its content of AZA1. This result suggests that the antibodies also have a similar affinity for AZA2, AZA3, and AZA6 as they do for AZA1 and that such antibodies are suitable for analysis of AZAs in shellfish samples.     

Synthesis of biologically active amines via rhodium-bisphosphite-catalyzed hydroaminomethylation

[reaction: see text] We report the use of a highly regioselective rhodium-bisphosphite catalyst for olefin hydroaminomethylation. This catalyst system was successfully applied in the synthesis of two biologically active tertiary amines, ibutilide and aripiprazole.     

Determination of domoic acid toxins in shellfish by biosense ASP ELISA--a direct competitive enzyme-linked immunosorbent assay: collaborative study

A collaborative study was conducted on the Biosense amnesic shellfish poisoning (ASP) enzyme-linked immunosorbent assay (ELISA) for the determination of domoic acid (DA) toxins in shellfish in order to obtain interlaboratory validation data for the method. In addition, a method comparison study was performed to evaluate the ASP ELISA as an alternative to the current liquid chromatography (LC) reference method for DA determination. The study material comprised 16 shellfish samples, including blue mussels, Pacific oysters, and king scallops, spiked with contaminated mussel homogenates to contain 0.1-20 mg DA/kg shellfish flesh. The shellfish samples were extracted with 50% aqueous methanol, and the supernatants were directly analyzed. Sixteen participating laboratories in 10 countries reported data from the ASP ELISA, and 4 of these laboratories also reported data from instrumental LC analysis. The participating laboratories achieved interlaboratory precision estimates for the 8 Youden paired shellfish samples in the range of 10-20% for RSD(r) (mean 14.8 +/- 4%), and 13-29% for RSDR (mean 22.7 +/- 6%). The precision estimates for the ELISA data did not show a strong dependence on the DA concentration in the study samples, and the overall precision achieved was within the acceptable range of the Horwitz guideline with HorRat values ranging from 1.1 to 2.4 (mean HorRat 1.7 +/- 0.5). The analysis of shellfish samples spiked with certified reference material (CRM)-ASP-MUS-b gave recoveries in the range of 88-122%, with an average recovery of 104 +/- 10%. The estimate on method accuracy was supported by a correlation slope of 1.015 (R2 = 0.992) for the determined versus the expected DA values. Furthermore, the correlation of the ASP ELISA results with those for the instrumental LC analyses of the same sample extracts gave a correlation slope of 1.29 (R2 = 0.984). This indicates some overestimation of DA levels in shellfish by the ELISA, but it is also a result of apparent low recoveries for the LC methods. This interlaboratory study demonstrates that the ASP ELISA is suitable for the routine determination and monitoring of DA toxins in shellfish, and that it offers a rapid and cost-effective methodology with high sample throughput.