A new method for the automated selection of the number of components for deconvolving overlapping chromatographic peaks

Mathematical deconvolution methods can separate co-eluting peaks in samples for which (chromatographic) separation fail. However, these methods often heavily rely on manual user-input and interpretation. This is not only time-consuming but also error-prone and automation is needed if such methods are to be applied in a routine manner.     

An enantiomerically pure adamantylimido molybdenum alkylidene complex. An effective new catalyst for enantioselective olefin metathesis

An enantiomerically pure Mo-based complex that bears an alkylimido ligand is prepared and characterized through NMR spectroscopy and X-ray analysis. Mo complex 4 is the only reported chiral alkylimido catalyst; all previous chiral complexes are arylimido systems. These studies show that the chiral Mo catalyst exists exclusively as the syn isomer and that it offers unique reactivity and selectivity profiles in asymmetric olefin metathesis.     

Low molar mass poly(styrene-co-acrylic acid) amphiphilic block copolymers: synthesis and characterization

Low molar mass (∼ 4000) di- and triblock copolymers of styrene and tert-butyl acrylate were synthesized by atom transfer radical polymerization (ATRP) in bulk and solution conditions. A CuBr/N, N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyst system in conjunction with an alkyl-halide initiator were used to control the synthesis of the polystyrene macroinitiator and the subsequent copolymerization with tert-butyl acrylate. Hydrolysis of the tert-butyl acrylate blocks to acrylic acid blocks in the presence of trifluoroacetic acid resulted in the formation of an amphiphilic block copolymer. Size exclusion chromatography (SEC) and matrix assisted laser desorption ionization - time of flight - mass spectrometry (MALDI-TOF-MS) were used to determine the molar mass and molar mass distribution of the polystyrene macroinitiators and the block copolymers. ¹H NMR was used to characterize the polystyrene macroinitiators and the block copolymers, and to confirm hydrolysis of the poly(tert-butyl acrylate) blocks to poly(acrylic acid).     

A new method to analyze copolymer based superplasticizer traces in cement leachates

Enhancing the flowing properties of fresh concrete is a crucial step for cement based materials users. This is done by adding polymeric admixtures. Such additives have enabled to improve final mechanicals properties and the development of new materials like high performance or self compacting concrete. Like this, the superplasticizers are used in almost cement based materials, in particular for concrete structures that can have a potential interaction with drinking water. It is then essential to have suitable detection techniques to assess whether these organic compounds are dissolved in water after a leaching process or not. The main constituent of the last generation superplasticizer is a PolyCarboxylate-Ester copolymer (PCE), in addition this organic admixture contains polyethylene oxide (free PEO) which constitutes a synthesis residue. Numerous analytical methods are available to characterize superplasticizer content. Although these techniques work well, they do not bring suitable detection threshold to analyze superplasticizer traces in solution with high mineral content such as leachates of hardened cement based materials formulated with superplasticizers. Moreover those techniques do not enable to distinguish free PEO from PCE in the superplasticizer.Here we discuss two highly sensitive analytical methods based on mass spectrometry suitable to perform a rapid detection of superplasticizer compounds traces in CEM I cement paste leachates: MALDI-TOF mass spectrometry, is used to determine the free PEO content in the leachate. However, industrial copolymers (such as PCE) are characterized by high molecular weight and polymolecular index. These two parameters lead to limitation concerning analysis of copolymers by MALDI-TOFMS. In this study, we demonstrate how pyrolysis and a Thermally assisted Hydrolysis/Methylation coupled with a triple-quadrupole mass spectrometer, provides good results for the detection of PCE copolymer traces in CEM I cement paste leachates.     

Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K, Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25 J cm⁻²). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 μs, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 μm. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity.     

One‐pot Synthesis of Fused Dipyranocoumarins from Dihydroxycoumarins and Propargyl Chlorides under Microwave Irradiation

Dipetalolactone and 4‐methyldipetalolactone are prepared in excellent yield by a one‐pot tandem propargylation/Claisen rearrangement/cyclization reaction of the corresponding 5,7‐dihydroxycoumarins with 3‐chloro‐3‐methylbut‐1‐yne in the presence of Cs₂CO₃ under microwave irradiation. The analogous reactions of propargyl chloride with esculetins or 5,7‐dihydroxycoumarins led to dipropargyloxy derivatives. The later by treatment with gold nanoparticles supported on TiO₂ or BF₃.Et₂O in N,N‐dimethylformamide (DMF) under microwave irradiation resulted in very good to excellent yield to the corresponding fused dipyranocoumarins. The reactions of esculetins with 3‐chloro‐3‐methylbut‐1‐yne gave mainly exomethylene fused dioxino[g]coumarins.     

Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Novel capillary electrophoresis methods using CDs as chiral selectors were developed and validated for the chiral separation of lansoprazole and rabeprazole, two proton pump inhibitors. Fourteen different neutral and anionic CDs were screened at pH 4 and 7 in the preliminary analysis. Sulfobutyl‐ether‐β‐CD with a degree of substitution of 6.5 and 10 at neutral pH proved to be the most suitable chiral selector for both compounds. Various dual CD systems were also compared, and the possible mechanisms of enantiomer separation were investigated. A dual selector system containing sulfobutyl‐ether‐β‐CD degree of substitution 6.5 and native γ‐CD proved to be the most adequate system for the separations. Method optimization was carried out using an experimental design approach, performing an initial fractional factorial screening design, followed by a central composite design to establish the optimal analytical conditions. The optimized methods (25 mM phosphate buffer, pH 7, 10 mM sulfobutyl‐ether‐β‐CD/20 mM γ‐CD, +20 kV voltage; 17°C temperature; 50 mbar/3 s injection, detection at 210 nm for lansoprazole; 25 mM phosphate buffer, pH 7, 15 mM sulfobutyl‐ether‐β‐CD/30 mM γ‐CD, +20 kV voltage; 18°C temperature; 50 mbar/3 s injection, detection at 210 nm for rabeprazole) provided baseline separation for lansoprazole (R_s = 2.91) and rabeprazole (R_s = 2.53) enantiomers with favorable migration order (in both cases the S‐enantiomers migrates first). The optimized methods were validated according to current guidelines and proved to be reliable, linear, precise, and accurate for the determination of 0.15% distomer as chiral impurity in dexlansoprazole and dexrabeprazole samples.     

Bulk Free‐Radical Co‐ and Terpolymerization of n‐Butyl Acrylate/2‐Ethylhexyl Acrylate/Methyl Methacrylate

n‐Butyl acrylate (BA), 2‐ethylhexyl acrylate (EHA), and methyl methacrylate (MMA) are commonly used monomers in pressure‐sensitive adhesive formulations. The bulk free‐radical copolymerizations of BA/EHA, MMA/EHA, and BA/MMA are studied at 60 °C to demonstrate the use of copolymer reactivity ratios for the prediction of BA/MMA/EHA terpolymer composition. The reactivity ratios for BA/EHA and MMA/EHA copolymer systems are determined using low conversion experiments; BA/MMA reactivity ratios are already known from the literature. The reactivity ratio estimates for the BA/EHA system are r _BA = 0.994 and r _EHA = 1.621 and the estimates for MMA/EHA are r _MMA = 1.496 and r _EHA = 0.315. High conversion experiments are conducted to validate the reactivity ratios. The copolymer reactivity ratios are shown to predict terpolymer composition of high conversion BA/MMA/EHA experiments.