An examination of the validity of nonequilibrium molecular-dynamics simulation algorithms for arbitrary steady-state flows

Nonlinear-response theory of nonequilibrium molecular-dynamics simulation algorithms is considered under the imposition of an arbitrary steady-state flow field. It is demonstrated that the SLLOD and DOLLS algorithms cannot be used for general flows, although the SLLOD algorithm is rigorous for planar Couette flow. Following the same procedure used to establish SLLOD as the valid algorithm for planar Couette flow [D. J. Evans and E. P. Morriss, Phys. Rev. A 30, 1528 (1984)], it is demonstrated that the p-SLLOD algorithm is valid for arbitrary flows and produces the correct nonlinear response of the viscous pressure tensor.     

Absorption spectra and photochemistry of the toluene cation and benzyl radical in solid argon

Toluene diluted in argon subjected to continuous argon discharge radiation during condensation at 21 K revealed absorptions at 310.5 and 449.6 nm due to benzyl radical, and 317 nm due to a C₇7H₉ radical. A photosensitive 430 nm band, in agreement with photodissociation spectra of the toluene parent cation, is assigned to this species.     

Evaluation of protocols for reproducible electrospray in-source collisionally induced dissociation on various liquid chromatography/mass spectrometry instruments and the development of spectral libraries

Mass spectral libraries provide a tool for identifying unknown compounds using both molecular weight and fragmentation information. Mass spectrometers with electrospray ionisation (ESI) and atmospheric chemical ionisation (ApCI) sources have the capability to produce data of this type using in-source collisionally induced dissociation (CID), and in-source CID libraries can be created. Due to the variation in electrospray source design from different instrument manufacturers, the production of reproducible in-source CID spectra that can be used in libraries for all instrument types is not a trivial task. To date, the evaluation of the production of in-source CID libraries has tended to focus on similar instruments from one manufacturer. The studies have also tended to focus on specific compound classes, with a limited molecular weight range.This report describes the findings from the investigation of protocols for the creation of mass spectral libraries using ESI in-source CID on six instruments from four different manufacturers. The overall goal was to create a spectral library for the identification of unknowns. The library could then be applied across all manufacturers' electrospray instruments.Two different experimental protocols were attempted. The first used a tuning compound to establish standard ESI source conditions, with fixed fragmentation potentials. The second involved the attenuation of the [M + H](+) ion to a known degree. A diverse range of compounds (pharmaceutical, photographic, pesticides) was tested to establish the reproducibility of the spectra on the six instruments. Both protocols produced spectra on the various instruments that in many cases were very similar. In other examples, the spectra differed not only in their relative ion abundances, but also in terms of the spectral content. Important observations regarding the effect of ion source design are also reported.The degree of spectral reproducibility was calculated off-line by comparing the five most abundant ions (20% for each ion that matches) from each spectrum on each instrument. This approach was adopted, as we do not possess a software package that met our requirements for spectral comparison. Match factors (% fit) were calculated by comparing each spectrum against the spectra recorded for the same compound and then for all other compounds, on each instrument. The % fit values derived by the off-line approach gave a clear view of the spectral reproducibility from instrument to instrument and also discriminated the spectra of the various compounds from each other. The applicability of this approach was tested using a blind trial in which several compounds were presented as unknowns, their in-source CID spectra recorded and the five-ion approach used for identification.     

Model complexes for metallated polythiophenes: gold(I) and palladium(II) complexes of bis(diphenylphosphino)oligothiophenes

The preparations of two new phosphinothiophene ligands, 3,3'-bis(diphenylphosphino)-2,2'-bithiophene (dppbt; 1) and 3,3' "-dihexyl-3',3' '-bis(diphenylphosphino)-2,5':2',2' ':5' ',2' "-quaterthiophene (hdppqt; 2) are reported. Oxidation of 1 gives 3,3'-bis(diphenylphosphine oxide)-2,2'-bithiophene (3), and the crystal structure of this compound was determined. Pd(II) and Au(I) complexes of these ligands have been synthesized and characterized. Crystal structures of [(dppbt)PdCl(2)] (1-Pd), [(hdppqt)PdCl(2)] (2-Pd), [(dppbt)(AuCl)(2)] (1-Au), and [(hdppqt)(AuCl)(2)] (2-Au) were obtained. [(dppbt)(AuCl)(2)] crystallized in two solid-state forms; crystals grown from CH(2)Cl(2)/Et(2)O show a gold-gold interaction of 3.3221(4) A, but from CH(2)Cl(2)/toluene, the molecule crystallizes as a toluene adduct (1-Au-tol) and does not show any gold-gold interaction. All the complexes were characterized via UV-vis spectroscopy and cyclic voltammetry, and the effect of the metal on the energy of the pi-pi transition and oxidation potential was determined. These data are correlated to the interannular torsion angles in the oligothienyl groups from the crystal structure studies.     

Vibrational population distribution of ground state BaO formed by the reaction Ba + O2

The vibrational population distribution of X ¹Σ(υ′' = 0 through ν′' = 7) BaO formed in the reaction Ba + O₂ at 0.3 torr has been measured by laser induced photoluminescence intensities. On the basis of the assumed similarity between the Ba + O₂ and Ba + N₂O reactions, these data suggest that a population inversion may exist between A ¹Σ(ν′ = 1) and X ¹Σ(υⁿ = 7) BaO formed in the latter reaction at ≈ 16 torr.     

Separation of sodiated isobaric disaccharides and trisaccharides using electrospray ionization-atmospheric pressure ion mobility-time of flight mass spectrometry

A series of isobaric disaccharide-alditols, four derived from O-linked glycoproteins, and select trisaccharides were rapidly resolved using tandem high resolution atmospheric pressure ion-mobility time-of-flight mass spectrometry. Electrospray ionization was used to create the gas-phase sodium adducts of each carbohydrate. Using this technique it was possible to separate up to three isobaric disaccharide alditols and three trisaccharides in the gas phase. Reduced mobility values and experimentally determined ion-neutral cross sections are reported for each sodium-carbohydrate complex. These studies demonstrated that ion mobility separations at atmospheric pressure can provide a high-resolution dimension for analysis of carbohydrate ions that is complementary to traditional mass spectral (m/z) ion analysis. Combining these independent principles for separation of ions provides a powerful new bioanalytical tool for the identification of isomeric carbohydrates.     

New details concerning the reactions of nitric oxide with vanadium tetrachloride

The slow addition of NO to a CCl(4) solution of VCl(4) reproducibly forms the known polymer [V(NO)(3)Cl(2)](n)() as a dark brown powder. Treatment of a CH(2)Cl(2) suspension of [V(NO)(3)Cl(2)](n)() with excess THF generates mer-(THF)(3)V(NO)Cl(2) (1) which can be isolated as an orange crystalline material in 55% yield. The reaction of 1 with excess MeCN or 1 equiv of trimpsi (trimpsi = (t)BuSi(CH(2)PMe(2))(3)) provides yellow-orange (MeCN)(3)V(NO)Cl(2)xMeCN (2xMeCN) and yellow (trimpsi)V(NO)Cl(2) (3), respectively. A black, crystalline complex formulated as [NO][VCl(5)] (4) is formed by the slow addition of NO to neat VCl(4) or by the reaction of excess ClNO with neat VCl(4). Complex 4 is extremely air- and moisture-sensitive, and IR spectroscopy suggests that in solutions and in the gas phase it dissociates back into VCl(4) and ClNO. Reaction of 4 with excess [NEt(3)(CH(2)Ph)]Cl generates [NEt(3)(CH(2)Ph)](2)[VCl(6)]x2CH(2)Cl(2) (5x2CH(2)Cl(2)), which can be isolated as deep-red crystals in 51% yield. All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 1, 2xMeCN, and 5x2CH(2)Cl(2) have been established by single-crystal X-ray diffraction analyses.     

Nitrosyl derivatives of tricobaltcarbon clusters

The nitrosyl clusters PPN[YCCo₃(CO)₇(NO)] (Y = Me, Ph, COOH, (C₅H₅)Fe(C₅H₄)) have been prepared in high yield from the reaction of YCCo₃(CO)₉ with PPN(NO₂) in THF, acetone or acetonitrile. Spectroscopic evidence indicates the structure of the nitrosyl anions is derived from that of YCCo₃(CO)₉ by the replacement of two CO ligands on one cobalt atom by a linear, terminal nitrosyl group. The nitrosyl metallates are extremely sensitive to oxidation and attempts to protonate the anions resulted in the reformation of the parent YCCo₃(CO)₉, molecules. The oxidative electrochemistry of the ferrocene complex, PPN[(C₅H₅)Fe(C₅H₄CCo₃(CO)₇(NO)] is also discussed.     

Highly selective entry to the azadirachtin skeleton via a Claisen rearrangement/radical cyclization sequence

[formula: see text] A highly diastereoselective, microwave-induced Claisen rearrangement of an appropriately substituted propargylic enol ether allows the formation of the sterically congested C8-C14 bond of azadirachtin. When combined with a radical-mediated cyclization of the corresponding allene, this sequence offers rapid entry to the framework of azadirachtin.     

Rapid separation of phenylthiohydantoin amino acids: ambient pressure ion-mobility mass spectrometry (IMMS)

An electrospray ionization (ESI) ambient pressure ion-mobility spectrometer (APIMS) interfaced to an orthogonal reflector time-of-flight mass spectrometer (TOFMS) was evaluated for the first time as a detector for the identification of phenylthiohydantoin (PTH)-derivatized amino acids, the final products in the Edman sequencing process of peptides and proteins. The drift and flight times of the twenty common PTH amino acids were characterized by a well-defined 2-D mobility/mass spectral pattern. The combination of mobility/mass modes of analysis gave rise to a unique trend-line formation for the series of PTH amino acids. In addition, each PTH amino acid had a unique reduced mobility constant K(o), thus enabling the differentiation of all the amino acid derivatives including the PTH-leucine and PTH-isoleucine isomers. More importantly it was shown that it was possible to resolve a complete reference mixture of PTH amino acids in a single experimental run in less than 1 min. Detection limits for the PTH amino acids were found to range from 1.04 to 3.52 ng; indicating that the limits of detection were less than 17.0 pmol for all of the PTH amino acids.