On the steering of sound energy through a supercritical plate by a near-field transducer array

The ability to direct sound energy through the flexural vibrations of a submerged plate at various angles of incidence using a near-field transducer array is investigated. An alumina bar is placed in front of a one-dimensional, eight-element transducer array, between the array and the water. Operating in a receive mode, data were taken as a function of angle of incidence and compared to data taken without the presence of the alumina bar. The array was also operated in transmit mode and results were compared to corresponding receive mode data, showing that reciprocity holds. Results show that in fact sound energy can be steered through a plate, and that the measurement method used provides a convenient method of measuring the angular dependence of transmission through a plate, including measurements at frequencies above the plate's critical frequency. Experimental results of sound transmission versus angle of incidence of finite sized plates agree qualitatively with theoretical results from an analysis of the transmission through an unbounded flexible partition.     

Spin texture and magnetoroton excitations at nu=1/3

Neutral spin texture (ST) excitations at nu=1/3 are directly observed for the first time by resonant inelastic light scattering. They are determined to involve two simultaneous spin flips. At low magnetic fields, the ST energy is below that of the magnetoroton minimum. With increasing in-plane magnetic field these mode energies cross at a critical ratio of the Zeeman and Coulomb energies of eta(c)=0.020+/-0.001. Surprisingly, the intensity of the ST mode grows with temperature in the range in which the magnetoroton modes collapse. The temperature dependence is interpreted in terms of a competition between coexisting phases supporting different excitations. We consider the role of the ST excitations in activated transport at nu=1/3.     

Experimental measures of affine and nonaffine deformation in granular shear

Through 2D granular Couette flow experiments, we probe failure and deformation of disordered solids under shear. Shear produces a mean azimuthal flow, smooth affine deformations, and irreversible so-called nonaffine particle displacements. We find that these processes are all of comparable magnitude and depend on the local shear rate. We compute the parameter of Falk and Langer characterizing nonaffine motion, Dmin2, and find that it is reasonably well described in terms of collections of single particles making locally nearly isotropic random steps, delta ri. Distributions for single particle nonaffine displacements, delta ri, satisfy P1(delta ri) proportional, variantexp[-|delta ri/Delta r|alpha] (alpha < or approximately 2).     

Hollow-core waveguide characterization by optically induced particle transport

We introduce a method for optical characterization of hollow-core optical waveguides. Radiation pressure exerted by the waveguide modes on dielectric microspheres is used to analyze salient properties such as propagation loss and waveguide mode profiles. These quantities were measured for quasi-single-mode and multimode propagation in on-chip liquid-filled hollow-core antiresonant reflecting optical waveguides. Excellent agreement with analytical and numerical models is found, demonstrating that optically induced particle transport provides a simple, inexpensive, and nondestructive alternative to other characterization methods.     

Material point method applied to multiphase flows

The particle-in-cell method (PIC), especially the latest version of it, the material point method (MPM), has shown significant advantage over the pure Lagrangian method or the pure Eulerian method in numerical simulations of problems involving large deformations. It avoids the mesh distortion and tangling issues associated with Lagrangian methods and the advection errors associated with Eulerian methods. Its application to multiphase flows or multi-material deformations, however, encounters a numerical difficulty of satisfying continuity requirement due to the inconsistence of the interpolation schemes used for different phases. It is shown in Section 3 that current methods of enforcing this requirement either leads to erroneous results or can cause significant accumulation of errors. In the present paper, a different numerical method is introduced to ensure that the continuity requirement is satisfied with an error consistent with the discretization error and will not grow beyond that during the time advancement in the calculation. This method is independent of physical models. Its numerical implementation is quite similar to the common method used in Eulerian calculations of multiphase flows. Examples calculated using this method are presented.     

Structural and optical properties of nanocrystalline ZnO thin films synthesized by the citrate precursor route

Nanocrystalline zinc oxide (ZnO) thin films have been deposited by spin-coating polymeric precursors synthesized by the citrate precursor route using ethylene glycol and citric acid as chelating agents. The ZnO thin films were annealed in air at different temperatures for 10 min. The films were characterized by different structural and optical techniques, including X-ray diffraction (XRD), atomic force microscopy (AFM), optical transmission spectroscopy, and photoluminescence (PL). The thermal decomposition of polymeric precursor was studied by thermogravimetric analysis (TGA). XRD analysis with grazing incidence and rocking curves indicate that the ZnO films are polycrystalline with preferential orientation along the c-axis direction with a full-width at half-maximum (FWHM) of 0.31° for 600 °C-annealed samples. On annealing, the texturing in films increased along with a decrease in FWHM. AFM micrographs illustrate that the ZnO films are crack-free with well-dispersed homogeneous and uniformly distributed spherical morphology. The synthesized ZnO thin films have transparency >85% in the visible region exhibiting band edge at 375 nm, which becomes sharper with anneal. Room temperature PL spectra of these films show strong ultraviolet (UV) emission around 392 nm with an increase in intensity with annealing temperature, attributed to grain growth. Deconvolution of the PL spectra reveals that there is coupling of free excitons with higher orders of longitudinal optical (LO) phonon replicas leading to a broad asymmetric near-band-edge peak.     

Precision cosmological measurements: Independent evidence for dark energy

Using recent precision measurements of cosmological parameters, we re-examine whether these observations alone, independent of type Ia supernova surveys, are sufficient to imply the existence of dark energy. We find that best measurements of the age of the Universe t₀$t_0$, the Hubble parameter H₀$H_0$ and the matter fraction Ωm${\Omega }_m$ strongly favor an equation of state defined by (w<−1/3$w<-1/3$). This result is consistent with the existence of a repulsive, acceleration-causing component of energy if the Universe is nearly flat.     

Random Block Copolymers via Segment Interchange Olefin Metathesis

Polycarbonate/polyethylene random block copolymers (RBCs) have been produced using olefin metathesis catalysis in a process termed segment interchange metathesis. An olefin metathesis catalyst tolerant of polar functionality was added to reagent polycarbonate and polyethylene polymers which contained internal unsaturated carbon–carbon bonds. Subsequent metathesis occurred, segmenting the reagent polymers, resulting in RBCs. The block copolymers self-assembled into microphase structures which persisted into the melt state as determined by small angle X-ray scattering (SAXS).

     

Reduction of turbulent boundary layer induced interior noise through active impedance control

The use of a single actuator tuned to an optimum impedance to control the sound power radiated from a turbulent boundary layer (TBL) excited aircraft panel into the aircraft interior is examined. An approach to calculating the optimum impedance is defined and the limitations on the reduction in radiated power by a single actuator tuned to that impedance are examined. It is shown that there are too many degrees of freedom in the TBL and in the radiation modes of the panel to allow a single actuator to control the radiated power. However, if the panel modes are lightly damped and well separated in frequency, significant reductions are possible. The implementation of a controller that presents a desired impedance to a structure is demonstrated in a laboratory experiment, in which the structure is a mass. The performance of such a controller on an aircraft panel is shown to be effective, if the actuator impedance is similar to but not the same as the desired impedance, provided the panel resonances are well separated in frequency and lightly damped.