Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.     

Diamond and diamond-like carbon from a preceramic polymer

The synthesis of poly(hydridocarbyne), one of a class of carbon-based random network polymers and a structural isomer of polyacetlyene, is reported. The network backbone of this polymer is primarily composed of tetrahedrally hybridized carbon atoms, each bearing one hydride substituent and linked via three carbon-carbon single bonds into a three-dimensional random network of fused rings. This atomic-level carbon network backbone confers unusual properties on the polymer, including facile thermal decomposition to form diamond or diamond-like carbon high-quality films at atmospheric pressure, by direct deposition or by chemical vapor deposition (CVD), without the use of hydrogen or any other reagent.     

Simultaneous fermentation and separation of lactic acid in a biparticle fluidized-bed bioreactor

A bioreactor configuration has been tested for simultaneous fermentation and separation of the desired inhibitory product, lactic acid. The bioreactor is a fluidized bed of immobilized Lactobacillus delbreuckii. Another solid phase of denser sorbent particles (a poly-vinyl pyridine resin) was added to this fluidized bed. These sorbent particles fell through the bed, absorbed the product, and were removed. In test fermentations, the addition of the sorbent enhanced the fermentation and moderated the fall of the pH. The biparticle fluidized-bed bioreactor utilizing immobilized microorganisms and adsorbent particles has been shown to enhance the production of lactic acid fourfold in this nonoptimized system.

     

Consistent propagator approximations

A propagator approximation scheme is presented in the context of an abstract*-algebra approach. The representation theory of such algebras is shown to play a crucial role in the definition of consistent approximations, i.e., approximate propagators based on model time evolutions and states. This procedure places superoperator methods of approximation on a sound Hilbert space footing. A generalization of the Fock vacuum property is introduced which leads to a simplification in the form of the model propagators. Finally a concrete example is considered that fulfills the conditions developed in this article showing that a consistent approximation to the electron propagator results in the Hartree–Fock–Boguliubov equations.     

Novel metal-linked face-to-face porphyrazine dimer

We report the synthesis and physical studies of a novel porphyrazine (pz) dimer [1[Ni,Cu]]2, which has Ni(II) ions incorporated into the pz cores and is linked by two Cu(II) ions coordinated to bis(picolinamide) chelates attached to the pz periphery. [1[Ni,Cu]]2 was prepared from precursor pz 2 with a selenodiazole ring fused to the pz core. This ring was deprotected to form the diamino-pz 3, which reacted with 2 mol of picolinoyl chloride hydrochloride to form pz 1[2H,2H], with peripheral bis(picolinamide) chelates; this was metalated to form [1[Ni,Cu]]2. The crystal structures of 1[2H,2H] and [1[Ni,Cu]]2 are presented. The latter is a dimer in which parallel, face-to-face pz's with an average separation of 3.30 angstroms are linked through the peripheral picolinamide ligands by a pair of peripheral Cu(II) ions. Each Cu(II) is coordinated with distorted square-planar geometry by a picolinamide from each pz. In this report, we focus on the interaction of these two peripheral Cu(II) ions. We discuss the preparation and magnetic properties of the pz dimer complex [1[Ni,Cu]]2 with two Cu(II) ions in the peripheral chelate but a diamagnetic metal ion Ni(II) in the pz core. Although [1[Ni,Cu]]2 contains two Cu(II) ions (S = 1/2), we could detect no electron paramagnetic resonance signal, which suggests very strong antiferromagnetic exchange between those two Cu(II) ions. Temperature-dependent magnetic susceptibility measurement gives an exchange splitting between the S = 0 ground state and the excited triplet state of delta = 660 cm(-1).     

p-aminophenyl phosphate: an improved substrate for electrochemical enzyme immnoassay

An alternative substrate is described for enzyme immunosaasay with electrochemical detection. Alkaline phosphatase (EC.3.1.3.1) activity is determined by using p-aminophenyl phosphate as the enzyme substrate. Enzyme-generated p-aminophenol is detected amperometrically at a glassy carbon electrody by liquid chromatography with electrochemical detection. The oxidation potential obtained for the detectionof p-aminophenol is lower than that for phenol, the previously used substrate product. The detection limit for p-aminophenol is 0.20pmol. A detection limit of 30 pg ml^-1 for digoxin and a 5-min incubationtime for the enzyme reaction were obtained with the new system.     

Nickelocene chemistry : III. Reactions of Bromo(η5-cyclopentadienyl)triphenylphosphinenickel with phosphorus,arsenic and sulphur ylids

The phosphorus ylids Ph₃PCHR (R = Me, Et, Prⁿ, Prⁱ, Bu_n, Cl, and OMe), and the ylids Ph₃AsCH₂, Me₂SCH₂, and Me₂S(O)CH₂ react with [Ni(η⁵-C₅H₅)Br(PPh₃)] at room temperature to give the complexes [Ni(Ph₃PCHR)(η⁵-C₅H₅(PPh₃)] Br, [Ni(Ph₃AsCH₂)(η⁵-C₅H₅)(PPh₃)]Br, [Ni(Me₂SCH₂)(η⁵-C₅H₅)(PPh₃)]Br and [Ni{Me₂S(O)CH₂} (η⁵-C₅H₅)(PPh₃)]Br, respectively. These are readily converted into the corresponding hexafluorophosphate salts on reaction with ammonium hexafluorophosphate. Under more forcing conditions the stabilised ylid Ph₃PCHCOPh gives a product believed to be the complex [Ni(Ph₃PCHCOPh)₂(η⁵-C₅H₅)]Br, isolated and characterised as its PF₆^? salt.     

Pyridine-substituted oligopeptides as scaffolds for the assembly of multimetallic complexes: variation of chain length

This paper presents the synthesis and characterization of pyridine-substituted artificial oligopeptides with an aminoethylglycine backbone of varying length, which are designed to act as scaffolds for the self-assembly of multimetallic structures. The identities and purities of the oligopeptides are confirmed with mass spectrometry, (1)H NMR, HPLC, and pH titrations. The acid dissociation constants for the oligopeptides were determined and were found to decrease with increasing pyridine units. Titrations of the oligopeptides with Cu(II) and Pt(II) complexes containing the tridentate ligands 2,2':6',2'-terpyridine and pyridine 2,6-dicarboxylic acid were monitored using UV-visible absorption spectroscopy and showed stoichiometric binding based on the number of pyridines on the peptide strand. Metal titrations performed using an analogous oligopeptide with methyl substituents (in place of the pyridine ligands) showed very weak or no binding. In the case of the oligopeptides containing bound Pt(terpyridine)(2+) complexes, cyclic voltammetry reveals two sequential one-electron reductions at formal potentials that do not vary as a function of oligopeptide length. The measured diffusion coefficients were measured with chronoamperometry and were found to decrease with increasing oliopeptide length.     

Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.