Poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers: preparation and aqueous solution properties

A series of water-soluble, amphiphilic graft copolymers has been prepared by free-radical copolymerization of methoxypoly(ethylene glycol) macromonomers, with either methyl methacrylate or butyl methacrylate as the comonomers, in water/ethanol solvent mixtures. Lower molecular weight copolymers were obtained by increasing the concentration of the initiator, azobisisobutyronitrile (AIBN), used in the polymerization reaction. However, the route used also led to the formation of significant quantities of tetramethylsuccinodinitrile, a toxic byproduct resulting from the cage reaction of AIBN. Static fluorescence measurements using pyrene as a probe, along with 1H NMR experiments, showed that the graft copolymers form aggregates in water at very low concentrations (approximately 0.01 g l(-1)) with the pendant hydrophilic graft chains forming a stabilizing shell around the hydrophobic backbone. An increase in the hydrophile-lipophile balance of the graft copolymers was found to lead to smaller aggregates with lower aggregation numbers and highly swollen hydrophilic shells, as revealed by small angle neutron scattering (SANS).     

Equilibrium and kinetic aspects of the uptake of poly(ethylene oxide) by copolymer microgel particles of N-isopropylacrylamide and acrylic acid

The use of microgels for controlled uptake and release has been an area of active research for many years. In this work copolymer microgels of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc), containing different concentrations of AAc and also cross-linking monomer, have been prepared and characterized. These microgels are responsive to pH and temperature. As well as monitoring the equilibrium response to changes in these variables, the rates of swelling/de-swelling of the microgel particles, on changing either the pH or the temperature, have also been investigated. It is shown that the rate of de-swelling of the microgel particles containing AAc is much faster than the rate of swelling, on changing the pH appropriately. This is explained in terms of the relative mobilities of the H(+) and Na(+) ions, in and out of the particles. It was observed that the microgels containing AAc, at pH 8, de-swelled relatively slowly on heating to 50 degrees C from 20 degrees C. This is attributed to the resistance to collapse associated with the large increase in counterion concentration inside the microgel particles. The swelling and de-swelling properties of these copolymer microgels have also been investigated in aqueous poly(ethylene oxide) (PEO) solutions, of different MW (2000-300 000). The corresponding absorbed amounts of PEO from solution onto the microgels have also been determined using a depletion method. The results, as a function of AAc content, cross-linker concentration, PEO MW, pH, and temperature, have been rationalized in terms of the ease and depth of penetration of the PEO chains into the various microgel particles and also the H-bonding associations between PEO and either the -COOH of the AAc moeities and/or the H of the amide groups (much weaker). Finally, the adsorption and desorption of the PEO molecules in to and out of the microgel particles have been shown to be extremely slow compared to normal diffusion time scales for polymer adsorption onto rigid surfaces.     

Self-selection in olefin cross-metathesis: the effect of remote functionality

Olefin cross-metathesis (CM) is potentially an attractive method for generating dynamic combinatorial libraries (DCLs). In order for the CM reaction to be useful for DCL production, the course of the reaction and product distribution must be relatively insensitive to functionality remote from the reacting centers. We report on the CM of a series of allyl- and homoallylamides that are strongly dependent on remote functionality. This includes an unusual example of a cis-selective CM. [Reaction: see text]     

Syntheses, structures, and reactivity of new pentamethylcyclopentadienyl-rhodium(III) and -iridium(III) 4-acyl-5-pyrazolonate complexes

New [CpM(Q)Cl] complexes (M = Rh or Ir, Cp = pentamethylcyclopentadienyl, HQ = 1-phenyl-3-methyl-4R(C=O)-pyrazol-5-one in general, in detail HQ(Me), R = CH(3); HQ(Et), R = CH(2)CH(3); HQ(Piv), R = CH(2)-C(CH(3))(3); HQ(Bn), R = CH(2)-(C(6)H(5)); HQ(S), R = CH-(C(6)H(5))(2)) have been synthesized from the reaction of [CpMCl(2)](2) with the sodium salt, NaQ, of the appropriate HQ proligand. Crystal structure determinations for a representative selection of these [CpM(Q)Cl] compounds show a pseudo-octahedral metal environment with the Q ligand bonded in the O,O'-chelating form. In each case, two enantiomers (S(M)) and (R(M)) arise, differing only in the metal chirality. The reaction of [CpRh(Q(Bn))Cl] with MgCH(3)Br produces only halide exchange with the formation of [CpRh(Q(Bn))Br]. The [CpRh(Q)Cl] complexes react with PPh(3) in dichloromethane yielding the adducts CpRh(Q)Cl/PPh(3) (1:1) which exist in solution in two different isomeric forms. The interaction of [CpRh(Q(Me))Cl] with AgNO(3) in MeCN allows generation of [CpRh(Q(Me))(MeCN)]NO(3).3H(2)O, whereas the reaction of [CpRh(Q(Me))Cl] with AgClO(4) in the same solvent yields both [CpRh(Q(Me))(H(2)O)]ClO(4) and [CpRh(Cl)(H(2)O)(2)]ClO(4); the H(2)O molecules derive from the not-rigorously anhydrous solvents or silver salts.     

Influence of surface states on electron transport through intrinsic Ge nanowires

Solution-grown single-crystal Ge nanowires were used as conductive channels in field effect transistor devices to study the influence of surface states on their electron transport properties. Nanowires contacted with Pt electrodes using focused ion beam metal deposition exhibited linear current-voltage (IV) curves at room temperature with apparent resistivities ranging from 10(1) to 10(-1) Omega cm. In all cases, the nanowire conductance decreased with positive external electric fields applied perpendicular to the nanowire surface by a gate electrode, characteristic of p-type carrier accumulation at the nanowire surface. The field-induced change in conductance exhibited a time-dependent relaxation, with response time and magnitude of current decrease that depended on the nanowire surface chemistry. Nanowires treated with an organic passivation layer using a thermally initiated hydrogermylation reaction exhibited 2 orders of magnitude slower current relaxation and a smaller decrease in current relative to "bare" nanowires with oxidized surfaces.     

Accelerated screening of phage-display output with alkaline phosphatase fusions

When using multiple targets and libraries, selection of affinity reagents from phage-displayed libraries is a relatively time-consuming process. Herein, we describe an automation-amenable approach to accelerate the process by using alkaline phosphatase (AP) fusion proteins in place of the phage ELISA screening and subsequent confirmation steps with purified protein. After two or three rounds of affinity selection, the open reading frames that encode the affinity selected molecules (i.e., antibody fragments, engineered scaffold proteins, combinatorial peptides) are amplified from the phage or phagemid DNA molecules by PCR and cloned en masse by a Ligation Independent Cloning (LIC) method into a plasmid encoding a highly active variant of E. coli AP. This time-saving process identifies affinity reagents that work out of context of the phage and that can be used in various downstream enzyme linked binding assays. The utility of this approach was demonstrated by analyzing single-chain antibodies (scFvs), engineered fibronectin type III domains (FN3), and combinatorial peptides that were selected for binding to the Epsin N-terminal Homology (ENTH) domain of epsin 1, the c-Src SH3 domain, and the appendage domain of the gamma subunit of the clathrin adaptor complex, AP-1, respectively.     

Reactions of metalloalkynes VII. Protonation of ruthenium ethyne-1,2-diyl complexes

The acid–base chemistry of some ruthenium ethyne-1,2-diyl complexes, [{Ru(CO)₂(η-C₅H₄R)}₂(μ₂-CC)] (R=H, Me) has been investigated. Initial protonation of [{Ru(CO)₂{η-C₅H₄R}}₂(μ₂-CC)] gave the unexpected complex cation, crystallised as the BF₄ salt, [{Ru(CO)₂(η-C₅H₄R}}₃(μ₃-CC)][BF₄] (R=Me structurally characterised). This synthesis proved to be unreliable but subsequent, careful protonation experiments gave excellent yields of the protonated ethyne-1,2-diyl complexes, [{Ru(CO)₂{η-C₅H₄R)}₂(μ₂-η¹:η²-CCH)](BF₄) (R=Me structurally characterised) which could be deprotonated in high yield to return the starting ethyne-1,2-diyl complexes.     

Cluster Chemsitry. 96. Penta- and hexa-nuclear ruthenium cluster complexes derived from reactions of cyclopentadienes with Ru5(μ5-C2PPh2)(μ-PPh2)(CO)13

The reactions between Ru₅( ₅-C₂PPh₂)(gm-PPh₂(CO)₁₃ (1) and cyclopentadienes afforded the hexanuclear clusters Ru₆( ₆-C)( ₃-PPh₂)₂(CO)₁₀(-C₅ R ₅) [R ₅ = H₅ (2), H₄Me (3), Me₅ (4)] which contain an encapsulated carbide and a face-capping ₃-CH group, formed by cleavage of CC and CP bonds of the C₂PPh₂ moiety in1. In the reaction with cyclopentadiene, the unusual ligand C₁₃H₁₂O, formed by combination of C₂, CO and two molecules of C₅H₆ (or one molecule of dicyclopentadien), was characterized in the complex Ru₅( ₄-PPh) ( ₄-C₁₃H₁₂O)(-PPh₂(CO)₁₁(-C₅H₅) (5). In the reaction with pentamethylcyclopentadiene, the vinylidene complex Ru₅( ₃-CCHPh)( ₄-PPh)( ₄-PPh) (-PPh₂)(CO)₉(-C₅Me₅) (6) was also formed.     

A comparison of the role of charge transfer,hyperconjugation, inductive and field interactions in substitutd methyl and silyl substituent effects on benzene π vertical ionization energies

The first two vertical π-ionization energies of MX₃ substituted benzenes as determined by photoelectron spectroscopy are compared with the results of modified CNDO/2 calculations, where M is Si or C and X is H, F, Cl and OCH₃. The major substituent interaction mechanisms of MX₃ are described within the CNDO/2 model. The results for methylorthobenzoate support intramolecular charge transfer stabilization of the benzene radical cation ground state by oxygen lone pair electrons, whereas the dominant interaction of the Si(OCH₃)₃ group is a positive charge stabilising field effect. The first vertical ionization energies of PhSiCl₃ and PhCCl₃ are unexpectedly assigned to ionization from the a′ π orbital rather than the a″ orbital nodal at the substituent site. Carbon-chlorine hyperconjugation is a suggested stabilizing interaction in the PhCCl₃²A′ cation. The shape of the first band in the PE spectrum of phenylsilane is described as a possible example of a pseudo Jahn—Teller effect. Unlike CX₃, SiX₃ substituents except, where X is methoxy, exhibit calculated opposing field and σ-inductive effects.     

The molecular mechanism of stabilization of proteins by TMAO and its ability to counteract the effects of urea

Trimethylamine n-oxide (TMAO) is a naturally occurring osmolyte that stabilizes proteins and offsets the destabilizing effects of urea. To investigate the molecular mechanism of these effects, we have studied the thermodynamics of interaction between TMAO and protein functional groups. The solubilities of a homologous series of cyclic dipeptides were measured by differential refractive index and the dissolution heats were determined calorimetrically as a function of TMAO concentration at 25 degrees C. The transfer free energy of the amide unit (-CONH-) from water to 1 M TMAO is large and positive, indicating an unfavorable interaction between the TMAO solution and the amide unit. This unfavorable interaction is enthalpic in origin. The interaction between TMAO and apolar groups is slightly favorable. The transfer free energy of apolar groups from water to TMAO consists of favorable enthalpic and unfavorable entropic contributions. This is in contrast to the contributions for the interaction between urea and apolar groups. Molecular dynamics simulations were performed to provide a structural framework for the interpretation of these results. The simulations show enhancement of water structure by TMAO in the form of a slight increase in the number of hydrogen bonds per water molecule, stronger water hydrogen bonds, and long-range spatial ordering of the solvent. These findings suggest that TMAO stabilizes proteins via enhancement of water structure, such that interactions with the amide unit are discouraged.