Influencing the morphology of polymer blends through graft copolymers

Graft copolymers have a potential as compatibilizers in two-component thermoplastic polymer blends, and also as impact-modifiers in one-component thermoplastics. The compatibility of the blocks of the copolymer (i.e. the grafts and the main chain) with the chains of the matrix polymers must be adjusted carefully. Blends of various polymers, especially of polystyrene (PS) and poly(vinyl chloride) (PVC), with graft copolymers on the basis of polybutadiene are discussed. An excellent compatibilizer, for blends PS/PVC, is a block-graft copolymer, derived from a diblock copolymer of Styrene and butadiene, with grafts of cyclohexyl methacrylate monomelic units.     

甘油氧化的光谱电化学傅里叶变换衰减全反射谱红外光谱薄膜流动池中硼酸镍层厚度的优化

在碱性甘油电氧化反应中,利用电化学傅里叶变换衰减全反射谱红外光谱法,研究了薄膜流动池中滴注硼酸镍催化剂负载量对玻碳电极性能的影响.连续操作的径向流动池包括一个位于内反射元件上方50μm的钻孔电极,可实现红外光谱分析.这是在确定条件下对电催化剂进行简便和可重复筛选的一个适合的方法,同时还提供了对复杂反应(如甘油氧化)产物选择性的检测.通过对泵送电解液进行更耗时的定量高效液相色谱分析,结果表明,衰减全反射红外光谱法可快速鉴定产物.在层流条件下,水中使用0.1 M甘油和1 M KOH,流速为5μL min-1时,甘油转化率较高.转化率和选择性取决于催化剂的负载量,负载量又决定了催化剂层的厚度和粗糙度.由于在更粗糙的膜中停留时间更长有利于再吸附和C-C键断裂,因此当负载量最高达210μg cm-2时,甘油转化率为73％且甲酸选择性接近80％.当最低负载量为13μg cm-2时,甘油转化率达到63％,甲酸选择性降至60％,相应地,C2物种(如乙醇酸盐)选择性较高,为8％.因此,只有催化剂负载量较低时才能形成几微米厚度范围内的薄膜,此时才适合进行优质催化剂的筛选.     

UV‐Free Microfluidic Particle Fabrication at Low Temperature Using ARGET‐ATRP as the Initiator System

A new way to fabricate monodisperse polymer particles in a microfluidic device without UV‐light and without the need for high temperatures is described in this article. By applying an activator regeneration by electron transfer ‐ atom transfer radical polymerization (ARGET‐ATRP) initiator system in a co‐capillary microfluidic setup and by separating the monomer mixture in an initiator and a catalyst phase, a fast polymerization of the droplets at low temperature without premature curing and thus clogging of the capillaries can be achieved. The influence of the flow rates on the particle sizes and their polydispersity as well as the controlled character of the polymerization are investigated. The particle size is well adjustable, but the reaction is not controlled due to the high radical concentration needed for rapid polymerization. In addition, particles with incorporated UV‐dyes are produced as a proof of concept at low temperature.

     

Nanoporous Materials Can Tune the Critical Point of a Pure Substance

Molecular simulations and NMR relaxometry experiments demonstrate that pure benzene or xylene confined in isoreticular metal–organic frameworks (IRMOFs) exhibit true vapor–liquid phase equilibria where the effective critical point may be reduced by tuning the structure of the MOF. Our results are consistent with vapor and liquid phases extending over many MOF unit cells. These results are counterintuitive since the MOF pore diameters are approximately the same length scale as the adsorbate molecules. As applications of these materials in catalysis, separations, and gas storage rely on the ability to tune the properties of adsorbed molecules, we anticipate that the ability to systematically control the critical point, thereby preparing spatially inhomogeneous local adsorbate densities, could add a new design tool for MOF applications.     

Oligomers as initiators of free radical polymerization

Methyl methacrylate, benzyl methacrylate, butyl methacrylate, and methacrylic acid can be polymerized by 1, 2, 2-tetraphenyl-1, 2-diphenoxyethane (TPPA), 1, 1, 2, 2-tetraphenyl-1, 2-bis-(trimethylsiloxy) ethane (TPSA), and 1, 1, 2, 2-tetraphenyl-1, 2-dicyanoethane (TPCA) (1–3). The polymerization with these initiators is characterized by three steps; in the first period oligomers from MMA and initiator radicals are formed by primary radical termination.     

Measures of periodicity for time series analysis of threshold-crossing events

Large-amplitude climate shifts, the so-called Dansgaard-Oeschger events, repeatedly occurred throughout the last ice age. These events, which are apparently threshold-crossing events, show a reported tendency to recur preferably in near multiples of about 1470 years. Several non-linear resonance mechanisms were proposed to explain this recurrence pattern in response to noise and/or periodic forcing. Standard methods of linear time series analysis are not sufficient to distinguish between these hypotheses, owing to the threshold-crossing dynamics of the events. Recently, new approaches were made by means of null-hypothesis testing with Monte Carlo methods. A major hurdle in this approach is the need of efficient, but yet simple measures of regularity that allow to distinguish between the proposed resonance mechanisms. By means of surrogate time series (i.e. by using a large ensemble of Dansgaard-Oeschger events as simulated with a very simple two-state model) I here test the ability of three standard measures of periodicity to distinguish between a scenario of solely noise-induced events and a ghost stochastic resonance scenario. Only one measure is found to be applicable for that purpose. The choice of adequate measures, which is not trivial, should be given more attention in future studies that focus on the question what triggered threshold-crossing events such as Dansgaard-Oeschger events.     

Odderon with a running coupling constant

The running coupling is introduced into the equation for the odderon via the bootstrap relation. It is shown that the previously found odderon state with a maximal intercept, which is constructed from an antisymmetric pomeron wave function, continues to exist in the running coupling case. Its intercept is found to remain equal to unity independent of the behaviour assumed for the running coupling at low momenta.     

Atomic-scale structure of dislocations revealed by scanning tunneling microscopy and molecular dynamics

The intersection between dislocations and a Ag(111) surface has been studied using an interplay of scanning tunneling microscopy (STM) and molecular dynamics. Whereas the STM provides atomically resolved information about the surface structure and Burgers vectors of the dislocations, the simulations can be used to determine dislocation structure and orientation in the near-surface region. In a similar way, the subsurface structure of other extended defects can be studied. The simulations show dislocations to reorient the partials in the surface region leading to an increased splitting width at the surface, in agreement with the STM observations. Implications for surface-induced cross slip are discussed.