Chemical reactivity of [1,2,3]triazolo[1,5-a]- and [1,5-c]-pyrimidinium salts

The chemical reactivity of the [1,2,3]triazolo[1,5-a]- and [1,5-c]-pyrimidinium salts towards morpholine, water and sodium methoxide have been studied. Among others, new 1-aza and 2-azabutadienes substituted by a [1,2,3]-triazole ring were obtained in the course of the opening of the positively charged pyrimidine ring.     

New polythiophenes bearing electron-acceptor phthalocyanine chromophores

Two new donor-acceptor copolymers comprising a polythiophene backbone, and bearing phthalocyanine chromophores on the side chains have been prepared. Preliminary photophysical characterization of these materials by FTIR photoinduced absorption indicates that electron transfer from the polythiophene to the phthalocyanine units takes place.     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.     

The Ru(dipy)32+-Bromate-Malonic acid oscillating system

The Ru(dipy) ₃ ²⁺ -bromate-malonic acid oscillating system was in vestigated. It has been established that at early stages of the reaction the period of oscillation is about 20 sec and the potential change is about 170 mV; chloride at concentrations hiherg than 10^–3M is an inhibitor. The rates of both heat evolution and formation of bromomalonic acid are periodic. The activation energy of the oscillating (E) is 16.2 kcal mol^–1. Ru(dipy) ₃ ²⁺ -- . , 20 , 170 ; , - 10^–3 M, . . (E) 16,2 /.     

Flow-injection spectrofluorimetric determination of ethylenethiourea

A flow-injection configuration is proposed for the fluorimetric determination of ethylenethiourea. The procedure is based on the inhibitory effect of ethylenethiourea on the oxidation of thiamine to thiochrome by mercury(II). A linear calibration graph was obtained between 0.1 and 2.0 μg mL^–1, with a sampling rate of 40 samples per hour and a relative standard deviation of about 1.11%. The usefulness of the method was tested for the determination of ethylenethiourea residues in water, milk, potatoes, pear, grape and apple. Received: 26 January 1998 / Revised: 6 April 1998 / Accepted: 9 April 1998     

Oral <Emphasis Type="Italic">L</Emphasis>-Carnitine Supplementation and Exercise Metabolism

Summary. Oral L-carnitine supplementation is frequently reported to have beneficial effects on exercise capacity in clinical populations and has been considered as a potential ergogenic aid for endurance athletes. However, this latter view is largely unsubstantiated possibly due to many experimental studies being poorly controlled or difficult to compare. The potential for oral L-carnitine supplementation to influence skeletal muscle carnitine content has been questioned and there are several key factors identified that may explain variations between study outcomes. Recent more well controlled research suggests some potential for L-carnitine to act as a key regulator of cellular stress, possibly through an impact on the integration of carbohydrate and lipid metabolism, and this work should be followed up in future by well controlled studies in both athlete and clinical subject groups.     

REDUCTION OF NO BY CO OVER NiWO4, NiO, AND WO3 CATALYSTS

We present a comparative study of NiWO₄, NiO, and WO₃ catalysts for simultaneous conversion of NO and CO. Samples were synthesized by reacting ammonium metatungstate and/or nickel nitrate at high temperature (773 K to 903 K) under an oxygen stream. Catalysts were characterized by X-ray diffraction, surface area measurements, energy dispersive spectroscopy and scanning electron microscopy. The catalytic reduction of NO by CO took place in the temperature range (523 to 973) K under highly reductive conditions (NO:CO= 1:5) over NiWO₄NiO, and WO₃, respectively. The 100 % NO conversion at GHSV of 11460 h^-1 was achieved at 773 K over NiWO₄ and at 848 K over NiO. The WO₃ was deactivated at 898 K. However, in the range (523 to 723) K NiO was more active than NiWO₄ and WO₃ catalysts.     

Design and parallel solid-phase synthesis of ring-fused 2-pyridinones that target pilus biogenesis in pathogenic bacteria

A new method for the solid-phase synthesis of enantiomerically enriched highly substituted ring-fused 2-pyridinones 13 has been developed. The synthesis mediates introduction of substituents at two positions in the 2-pyridinone ring in a diverse manner and is suitable for parallel synthesis. (19)F NMR spectroscopy was used as a tool to monitor each of the five steps in the reaction sequence. The optimized conditions thus obtained were then used to prepare a library of 20 2-pyridinones with high yields. The library members were chosen from a statistical multivariate design to ensure diversity and reliable data for structure-activity relationships. Screening of the library against the bacterial periplasmic chaperone PapD was performed using surface plasmon resonance. Three new 2-pyridinones with a higher affinity for the chaperone PapD than the previous best 13[10,1] were found, and important structural features could be deduced.     

Enzymatic surface modification of Kevlar fibers

Horseradish peroxidase catalyzed grafting of acrylamide (AM) onto Kevlar fibers has been studied. The modified fiber has been characterized with scanning electron microscopy (SEM), elemental analysis and the grafting yield. From the SEM micrographs, the surface of the grafted Kevlar fiber is rougher than that of the untreated fiber, and the elemental analysis indicated that the nitrogen content of the treated fibers is higher than that of the untreated fiber. All the results suggested that AM must have been grafted onto the Kevlar surface through HRP-mediated radical initiated grafting reaction. The probably mechanism of HRP catalyzed grafting of AM onto Kevlar surface is proposed.     

Use of biosensors for rapid drug residue analysis without sample deconjugation or clean-up: a possible way forward.

The drug salbutamol (SBL) is a beta-agonist that may be used illegally as an animal growth promoter. SBL is also a good example of a drug which is excreted in the form of glucuronides and sulfates. Such metabolites cause complexities in analysing for the presence of drug residues. In the majority of cases a process of deconjugation and sample clean-up is required prior to analysis. This is both time consuming and causes some loss of accuracy. In this study, the urine of calves treated with SBL orally for 3 d was collected during and after medication. Samples were assayed before and after hydrolysis by two different methods, radioimmunoassay (RIA) and a newly developed biosensor immunoassay (BIA). Some samples were also analysed by GC-MS. The results clearly showed that both screening assays (RIA and BIA) found high concentrations of SBL residues throughout the study. This was especially true in the BIA method. It was also demonstrated that urine sample analysis without the need for deconjugation or clean-up could be achieved. Results obtained by GC-MS tended to be an order of magnitude lower than the corresponding screening test results. This work showed that biosensor based veterinary drug residue testing procedures can be developed which can generate results in real time without the need for time consuming sample preparation.