Recycling solid supports – A head-to-tail linker

The concept of a `head-to-tail linker' designed to allow the regeneration and reuse of a variety of solid supports is introduced. The synthesis of this linker, its coupling to various solid supports, its application in a number of standard solid phase reactions and resin regeneration are presented.     

X-Ray Fluorescence and the In Vivo Evaluation of Fe, Cu and Zn in Skin

We are seeking to extend the capabilities of an in vivo XRF system which was originally designed for the exclusive detection of Fe in skin. Our interest concerns development of a more versatile in vivo XRF diagnostic facility for measurement of Fe and Zn. Elevations of these two elements have been noted to occur in a number of skin disorders and ailments. The XRF system comprises a high-output tungsten anode X-ray tube, the collimated exit beam of which is made to impinge on an appropriate choice of filter. The present study makes use of a beam hardening filter in place of our previous use of a K-edge filter. Operating at 15 kVp, 23 mA, and using a Mo beam hardening filter of 0.2 mm thickness, we have obtained a quasi-monoenergetic output of approximately 13 keV and full-width at tenth maximum (FWTM) of 1.4 keV. Preliminary measurements on simulated skin indicate that we are able to detect Fe, Zn and Cu, at levels of the order of 20-, 10- and 5 g (g skin tissue)^–1, respectively, using monitoring periods of the order of 2000 seconds, and skin entrance doses of less than 16 mSv.     

Predicting reverberation times in a simulated classroom

By varying the sound-absorption treatments in a simulated classroom, experimental results were compared with analytical and computer predictions of reverberation time. Analytical predictions were made with different absorption exponents, which are the result of different weighting procedures involving room surface areas and the sound-absorption coefficients. Sound scattering was found to influence measured reverberation times. With the amount of sound scattering provided, more accurate analytical predictions were obtained with absorption exponents that give reverberation times longer than those obtained with the Sabine absorption exponent, which consistently underpredicted reverberation times. However, none of the absorption exponents could be singled out as more adequate because of similar average accuracy. Computer predictions of reverberation time were accomplished with two commercially available ray-based programs, RAYNOISE 3.0 and ODEON 2.6, with specular and calibrated diffuse reflection procedures. Neither type of procedure, in either program, was more accurate than the best analytical predictions. With RAYNOISE, neither the specular nor the calibrated diffuse reflection procedure could be singled out as more adequate. For ODEON, the calibrated diffuse reflection procedure gave consistently more accurate predictions than its specular reflection procedure, with the best accuracy of the computer predictions.     

Is the intrinsic thermoelectric power of carbon nanotubes positive?

The thermoelectric power (TEP) of single-walled carbon nanotubes (SWNTs) is extremely sensitive to gas exposure history. Samples exposed to air or oxygen have an always positive TEP, suggestive of holelike carriers. However, at fixed temperature the TEP crosses zero and becomes progressively more negative as the SWNTs are stripped of oxygen. The time constant for oxygen adsorption/desorption is strongly temperature dependent and ranges from seconds to many days, leading to apparently "variable" TEP for a given sample at a given temperature. The saturated TEP can be accounted for within a model of strong oxygen doping of the semiconducting nanotubes.     

Repetitive single vortex-loop creation by a vibrating wire in superfluid 3He-B

Spectacular features are observed on the velocity-force characteristics of a vibrating wire resonator in superfluid 3He-B at ultralow temperatures. Both plateaus and discontinuities are seen in the characteristics. The plateaus seem to have two separate critical velocities where first some "event" occurs, which causes the wire to lose energy and slow down, followed by a second lower critical velocity where the event decouples. It is suggested that these events are due to vortex-loop creation at protuberances on the vibrating wire. This opens up the possibility of controlling the creation of vorticity through specially prepared protuberances.     

Coherent dynamics of the localized vibrational modes of hydrogen in CaF2

We report the observation of giant quantum coherence effects in the localized modes of ionized hydrogen in synthetic fluorite. Infrared free induction decay experiments on the substitutional H- center show dramatic modulations at negative delay times due to interference between multiple vibrational levels. Spectrally resolving the degenerate four wave mixing signal allows unambiguous assignments of the participating vibrational states. The dependence of the signal intensity upon the delay path between the exciting free electron laser pulses can be accounted for in terms of the resonant third order polarization with a common dephasing time for the excited states.     

Transfection and imaging of diamond nanocrystals as scattering optical labels

We report on the first demonstration of nanodiamond (ND) as a scattering optical label in a biological environment. NDs were efficiently transfected into cells using cationic liposomes, and imaged using differential interference and Hoffman modulation ‘space’ contrast microscopy techniques. We have shown that 55 nm NDs are biologically inert and produce a bright signal compared to the cell background. ND as a scattering label presents the possibility for extended biological imaging with relatively little thermal or biochemical perturbations due to the optical transparency and biologically inert nature of diamond.     

Fluorinated polymerizable phosphonium salts from PH3: Surface properties of photopolymerized films

An array of highly fluorinated polymerizable phosphonium salts (HFPPS) were synthesized from PH₃ and utilized in UV‐curable formulations. Inclusion of these salts at very low loading (0.1–1 wt %) into hexanediol diacrylate (HDDA) resulted in hydrophobic surfaces. The water repellency was achieved with short C₄F₉ fluorocarbon appendages in the monomer as opposed to the bioaccumulative C₈F₁₇ appended polymers. The physical properties of these new monomers were also characterized. The molecular architecture of the monomers had a pronounced effect on both their physical properties along with the degree of hydrophobicity imparted in the polymer. Salts utilizing the bis(trifluoromethylsulfonyl)imide anion displayed excellent compatibility with HDDA, while the chloride salts were insoluble. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) confirmed the presence of the HFPPS at the surface of the polymer coating. For the first time this demonstrates how these salts may be used to functionalize the surface of a UV‐cured film with ionic species. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2782–2792