The Conductance- and Capacitance-Frequency Characteristics of the Rectifying Junctions Formed by Sublimation of Organic Pyronine-B on p-Type Silicon

The rectifying junction characteristics of the organic compound pyronine-B film on a p-type Si substrate has been studied. The pyronine-B has been sublimed on the top of p-Si surface. The barrier height and ideality factor values of 0.79±0.04 and 1.13±0.06 eV for this structure have been obtained from the forward bias current-voltage (I-V) characteristics. From the low capacitance-frequency (C-f) characteristics as well as conductance-frequency (G-f) characteristics, the energy distribution of the interface states and their relaxation time have been determined in the energy range of (0.53−E_v)-(0.79−E_v) eV taking into account the forward bias I-V data. The interface state density N_ss ranges from 4.93×10¹⁰ cm⁻² eV⁻¹ in (0.79−E_v) eV to 3.67×10¹³ cm⁻² eV⁻¹ in (0.53−E_v) eV. Furthermore, the relaxation ranges from 3.80×10⁻³ s in (0.53−E_v) eV to 4.21×10⁻⁴ s in (0.79−E_v) eV. It has been seen that the interface state density has an exponential rise with bias from the midgap towards the top of the valence band. The relaxation time shows a slow exponential rise with bias from the top of the valence band towards the midgap.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

Optical sensors based on hybrid DNA/conjugated polymer complexes

Single-stranded DNA (ss-DNA) can specifically bind to various targets, including a complementary ss-DNA, ions, proteins, drugs, and so forth. When binding takes place, the oligonucleotide probe often undergoes a conformational transition. This conformational change of the negatively charged ss-DNA can be detected by using a water-soluble, cationic polythiophene derivative, which transduces the complex formation into an optical (colorimetric or fluorometric) signal without any labeling of the probe or the target. This simple and rapid methodology has enabled the specific and sensitive detection of nucleic acids and human thrombin. This new biophotonic tool can easily be applied to the detection of various other biomolecules and is also useful in the high-throughput screening of new drugs.     

Intercalation of 1,2-Alkanediols into α-Zirconium Hydrogenphosphate

Intercalation compounds of α-Zr(HPO₄)₂ · H₂O with 1,2-alkanediols (from C3 to C16) have been prepared by replacing 1-propanol in α-Zr(HPO₄)₂ · 2C₃H₇OH with the desired 1,2-alkanediols by a treatment in a microwave field. It was found that the intercalates contain 1.5 molecules of diol per formula unit. The diol molecules are placed between the host layers in a bimolecular way with their aliphatic chains tilted at an angle of 51°. The diol molecules are anchored in the interlayer space by H-bonds. A mixed intercalate, containing 1,2-butanediol and 1,2-decanediol in a roughly equimolar ratio, is formed when the α-Zr(HPO₄)₂ · 2C₃H₇OH intercalate, suspended in a mixture of 1,2-butanediol and 1,2-decanediol, is exposed to microwave radiation. No new phase containing both types of the guest molecules was observed when the 1-propanol intercalate, suspended in a mixture of 1-propanol and 1,2-octanediol, is exposed to microwave radiation.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

An oestrogen-derivative labeled with 99mTc and its radiopharmaceutical potential

An oestrogen derivative 3,17-a-oestradiolyl propyl 1,4,8,11-tetraazacyclotetradecanyl-1-(4-methylbenzoic acid)ester (ESTCPTA) that is 3,17-a-oestradiolyl propinol coupled to 1-(4-methylbenzoic acid)1,4,8,11-tetraazacyclotetradecane (CPTA) was synthesized in five steps. The product was purified by recrystallization in ethyl alcohol, and analysed by NMR and IR spectroscopy. ESTCPTA was labeled with ^99mTc and radio thin layer chromatography (RTLC) and radio-paper electrophoresis were used to determine the radiochemical yields. Specific activity was approximately 23.7 GBq/mmol and the labeling yield was over 95%. The biodistribution studies were performed on female Albino Wistar rats. The rats were sacricified by ether narcotization at certain time intervals and the activity of the organs was counted by a gamma counter. The activity per gram tissue was calculated and time activity curves were generated.     

Efficient, protection-free Suzuki-Miyaura synthesis of ortho-biphenyltetrazoles

We describe an efficient protocol for the Suzuki-Miyaura synthesis of ortho-biphenyltetrazoles from non-protected 2-bromophenyltetrazole and arylboronic acids. The optimised conditions were achieved using [1,1′-bis(diphenylphosphino)ferrocene]dichloropalladium(II) as catalyst and Na₂CO₃ as base. A panel of structurally diverse arylboronic acids was used to demonstrate the scope of the coupling procedure.     

Enzyme association with lipidic Langmuir-Blodgett films: interests and applications in nanobioscience

This review presents the recent advances in the achievement of organized proteo-lipidic nanostructures based on Langmuir-Blodgett technology and their potential applications in the nanobioscience area. By using the self-assembled properties of amphiphilic biomolecules at the air-water interface, the Langmuir-Blodgett (LB) technique offers the possibility to prepare ultrathin layers suitable for biomolecule immobilization at the molecular level. This review will provide a general overview of the enzyme association with preformed Langmuir-Blodgett films in connection with their potential applications in biosensing device developments, and then introduce the design of a new functionalised biomimetic nanostructure with oriented recognition site. The potential applications of such an organized proteo-lipidic nanostructure for biocatalysis investigations of an immobilised enzyme in a biomimetic situation and for the development of bioelectronic devices are finally discussed.     

Thermochemical studies of phthalimide and two N-alkylsubstituted phthalimides (ALKYL=ETHYL AND n-PROPYL)

The standard (p⁰=0.1 MPa) molar enthalpies of formation, Δ_fH_m⁰, for crystalline phthalimides: phthalimide, N-ethylphthalimide and N-propylphthalimide were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as, respectively, – (318.0±1.7), – (350.1±2.7) and – (377.3±2.2) kJ mol^–1. The standard molar enthalpies of sublimation, Δ_cr^gH_m⁰, at T=298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapour pressures for phthalimide, as (106.9±1.2) kJ mol^–1 and from high temperature Calvet microcalorimetry for phthalimide, N-ethylphthalimide and N-propylphthalimide as, respectively, (106.3±1.3), (91.0±1.2) and (98.2±1.4) kJ mol^–1. The derived standard molar enthalpies of formation, in the gaseous state, are analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Estimation of precision and efficiency mass transfer steps for the determination of pesticides in vegetables aiming at the expression of results with reliable uncertainty

A 'bottom-up' approach for the expression of results obtained from analytical methods that include analytical steps with recovery inherently different from 100% [mass transfer steps (MTS): extraction, evaporation, clean-up procedures, digestion, etc.] is presented. The estimation of the combination of all MTS uncertainty involves the comparison of the experimental dispersion of replicated analyses of spiked samples with the estimation of the uncertainty obtained for the combination of all uncertainty sources except MTS ones ('incomplete' estimation). The estimation of MTS uncertainty by difference is performed after evaluating the statistical difference between the 'incomplete' estimation and the experimental dispersion (F-test). When the two estimations are statistically equivalent, the MTS uncertainty is considered to be negligible in relation to the other sources budget. The assumption of constancy of MTS performance within the analytical range is tested through single analyses at several concentration levels and is evaluated by the inclusion of the expected values at the intervals resulting from the combination of the MTS uncertainty estimation performed at one concentration level and the 'incomplete' estimation. The developed methodology can also be useful for method optimisation and validation and for the detection of small trends in results. The determination of pesticides in sweet peppers by GC-NPD was used to explore the above concepts.