Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Infrared laser ablation study of pressed soil pellets with inductively coupled plasma atomic emission spectrometry

Potential of infrared laser ablation (LA) coupled with ICP-AES as a technique suitable for the determination of trace elements (Zn, Cu, Ni, Cr, and V) in agricultural soils was studied. Operating parameters such as laser beam energy, laser beam focusing with respect to the sample surface, and velocity of the sample translation in the plane perpendicular to the laser beam were optimized. Soil samples were mixed with powdered Ag as a binder, and an internal standard (GeO(2)), and pressed into pellets. Calibration samples were prepared by adding known amounts of oxides of elements of interest into soils of known elemental composition and then processed in the same way as the analyzed samples. Calibration curves were found to be linear at least up to several hundreds of mg kg(-1) for the elements of interest. The elemental contents obtained by using LA-ICP-AES were compared with those obtained by analysis using wet chemistry followed by ICP-AES with pneumatic nebulization (PN). The results were in good agreement. Accuracy was also tested using certified reference soils with a bias not exceeding 10% relative.     

Zwei neue pentacyclische dimere des cycloheptatriens

Titanium - catalyzed dimerization of cycloheptatriene affords pentacyclo[7.5.0.0^2,8.0^5,14.0^7,11]tetradeca-3,12-diene, $\text{3}$, and pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradeca-8,12-diene, $\text{4}$. By heating, $\text{3}$ is converted quantitatively into $\text{4}$.     

Ion-pair extraction of pentacaine from biological materials

Simple and rapid extraction method for quantitative and selective isolation of the new local anesthetic pentacaine from biological materials is proposed. The technique of ion-pair formation was found to be more effective than usual access using the extraction of the nonionized species. The extraction yield of the unchanged molecule³H-pentacaine after double extraction and single scrubbing was found to be more than 90%. The radiochemical purity was over 90%. The method appears suitable for pharmacokinetic studies in the animal body.     

The extraction of HCl by TDPO in benzene

The results of the extraction of HCl by TDPO in benzene and the co-extraction of water are discussed. From the infrared spectra of normal (HCl-H₂O) and deuterated (DCl-D₂O) systems it may be concluded that TDPO·HCl·H₂O is formed in the organic phase on extraction from aqueous solutions with c_HCl≤5M, and TDPO·HCl with c_HCl>5M. Compounds such as TDPO·2HCl are found in the organic phase if there is an excess of HCl in the organic phase. From cryoscopic and viscosity measurements of the organic phase, conclusions can be made about the presence of polymeric compounds in this phase.     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Solubility product relations in the rare earth hydrous hydroxides

The solubility products for some rare earth hydroxides and their temperature dependence have been shown. Greater solubility is shown for larger atomic radii and for lower temperature.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Synchronization of signal sampling with liquid pulsation in systems with peristaltic pumps

Method and electronic circuitry are described for synchronization of analytical signal sampling with pulsation of liquid flow in systems with a peristaltic pump. The technique is illustrated for cathodic stripping voltammetry of manganese.     

Maßanalytische Bestimmung von Merkapto-Benzthiazol im Wärmeaustauscher eines Reaktors

Zusammenfassung Eine volumetrische Methode zur Bestimmung geringer Mengen Merkapto-Benzthiazol in der Kühlflüssigkeit von Reaktoren wurde ausgearbeitet. Es wird in ammoniakalischem Medium mit ammoniakalisehem Silbernitrat titriert. Das Merkapto-Benzthiazol bildet mit Silberionen einen weißen, flockigen Niederschlag. Der Endpunkt der Titration wird mit Hilfe der Dead-stop-Indikation bestimmt. Er wird durch eine sprunghafte Stromstärkeerhöhung (Pt-Pt-Elektrode, 500 mV und 10^–7 A Empfindlichkeit des Galvanometers) angezeigt. Die Methode wird durch Triäthanolamin, Glykol, geringe Mengen von Chlorid und Phosphat nicht gestört.

---

Summary A volumetric method has been developed for determining slight amounts of mercapto-benzthiazol in the cooling liquid of reactors. It is titrated in ammoniacal medium with ammoniacal silver nitrate. The mercapto-benzthiazol yields a colorless flocculent precipitate with silver ions. The endpoint of the titration is found by the dead stop indication. It is signalled by a sudden jump in the current strength (Pt-Pt-electrode, 500 mV and 10^–7 amp sensitivity of the galvanometer). The method is not impaired by triethanolamine, glycol, slight amounts of chloride, nor by phosphate.

---

Résumé On a mis au point une méthode volumétrique pour le dosage de faibles quantités de mercaptobenzothiazole dans le liquide de refroidissement des réacteurs. On titre en milieu ammoniacal par le nitrate d'argent ammoniacal. Le mercaptobenzothiazole forme un précipité blanc, floconneux avec les ions argent. On détermine le point d'équivalence du titrage par la méthode du «dead stop end point». Il se trouve signalé par une augmentation brusque de l'intensité (électrodes Pt-Pt, 500 mv et 10^–7 A de sensibilité du galvanomètre). La triéthanolamine, le glycol, de petites quantités de chlorures et de phosphates, ne gênent pas.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.