Indium(III) one-dimensional polymers with pyrazine and pyrazine, 2-carboxylic acid as the spacer molecules

The reactions of indium(III) chloride tetrahydrate with pyrazine (C₄H₄N₂) and pyrazine, 2-carboxylic acid afford two polymeric frameworks, the structures of which were characterized in the solid state by single crystal analysis. The former is a one-dimensional infinite structure interlinked by the pyrazine spacer, while the latter is a one-dimensional ‘zigzag’ polymeric structure. A dimeric indium(III) pyrazine complex is also reported.     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.     

Alkyl-Diol Silica (ADS): restricted access precolumn packings for direct injection and coupled-column chromatography of biofluids

The direct and repetitive injection of untreated biological fluids (e.g., hemolyzed blood, plasma, serum, cell culture and tissue homogenates) onto an HPLC-system and the subsequent analysis of low-molecular weight compounds (e.g. drugs, xenobiotics, metabolites) is rendered possible by a coupled-column configuration and special precolumn packings. For this purpose a new family of chemically and enzymatically tailored reversed-phase packing materials have been prepared. The LC-integrated sample clean-up with these restricted access (bimodal) phases is based on the complete nonadsorptive size exclusion of macromolecules (e.g. proteins) and on the simultaneous dynamic partitioning of the target molecules. The bonded phase which exclusively covers the internal pore surface of a glyceryl-modified silica is a butyryl-(C-4), capryloyl-(C-8) or stearoyl-(C-18) moiety. These ligands allow a classical reversed-phase or ion-pair chromatography during the sample work-up step. The capacity of the n-alkyl phase is comparable with conventional silica based RP-materials. The broad hydrophobic retentive capability of these packings allows the extraction of a wide variety of compounds of biomedical interest. The electroneutral and hydrophilic particle exterior (glyceryl-residues) was generated using either soluble or immobilized enzymes (lipase, esterase) which cleave the fatty acid esters exclusively at the outer surface. Unwanted macromolecular components of a sample (e.g. proteins) are quantitatively eluted in the void volume due to the restricted access given by the pore size (6 nm) and the nonadsorptive external diol coverage. The lifetime of a precolumn (25 × 4 mm I.D.) packed with these novel bimodal, i.e. RP-SEC phases exceeds more than 200 injections of 500 l plasma. In addition to the synthesis, this paper describes an application of each of these Alkyl-Diol Silica (ADS) precolumn packings in fully automated coupled-column HPLC systems for the analysis of drugs and endogenous compounds in different biological matrices.Dedicated to Professor Dr. Dr. h.c. mult. J.F.K. Huber on the occasion of his 70th birthday     

Total synthesis of erythromycin B

We report the details of the first total synthesis of erythromycin B using two different strategies for the end game. The first of these follows a classical approach in which the desosamine and cladinose residues are sequentially appended to a macrocyclic lactone, which was formed by cyclization of a seco acid derivative, to give a bis-glycosylated macrolide intermediate that is converted into erythromycin B. The second strategy features an abiotic approach in which a seco acid bearing a desosamine residue is cyclized to give a monoglycosylated macrocyclic lactone that is then transformed into erythromycin B via a sequence of steps involving refunctionalizations and a glycosylation to introduce the cladinose moiety. Attempts to prepare a bis-glycosylated seco acid by de novo synthesis were unsuccessful. The syntheses of the key seco acid intermediates feature the oxidative transformation of a furan containing C(3)-C(10) to provide a dioxabicyclo[3.3.1]nonenone that served as a template on which to create the stereocenters at C(6) and C(8). A stereoselective aldol reaction was used to establish the C(11)-C(15) segment, and a stereoselective crotylation was implemented to introduce the propionate subunit comprising C(1)-C(2).     

Comparison of EI and metastable atom bombardment ionization for the identification of polyurethane thermal degradation products

Polyurethanes are widely used in the manufacture of commercial products such as foams and paints. During combustion, these polymers can generate isocyanates, which induce adverse health effects. Polymer pyrolysis (Py) hyphenated with mass spectrometry (MS) allows the investigation of polymer thermal degradation over time/temperature. A diphenylmethanediisocyanate (MDI) polyurethane foam was analyzed with electron ionization (EI) and metastable atom bombardment (MAB) ionization at a pyrolysis temperature of 400 °C. The recently introduced MAB ionization source uses discrete energy stored in metastable atoms of gases to ionize the analytes. This characteristic allows modulation of the ionization energy by simply changing the ionization gas. The extensive fragmentation of molecular ions observed using EI 70 eV is not totally eliminated with EI 10 eV. However, only molecular ions are observed with MAB using N₂ as the ionization gas. Temperature gradients were used to separate the products generated during the thermal degradation of a 1,6-hexamethylenediisocyanate (HDI) polyurethane paint. The analysis of mass spectra was facilitated owing to a selective desorption of pyrolysis products. Furthermore, changing the MAB ionization gas allows elucidation of the structure of the pyrolysis products by controlling the extent of their fragmentation. During these experiments, isocyanic acid, methyleneisocyanate, ethyleneisocyanate, propylisocyanate and butylisocyanate were detected.     

Mechanistic studies on the formation and reactivity of dioxygen adducts of diiron complexes supported by sterically hindered carboxylates

Dioxygen activation by enzymes such as methane monooxygenase, ribonucleotide reductase, and fatty acid desaturases occurs at a nonheme diiron active site supported by two histidines and four carboxylates, typically involving a (peroxo)diiron(III,III) intermediate in an early step of the catalytic cycle. Biomimetic tetracarboxylatodiiron(II,II) complexes with the familiar "paddlewheel" topology comprising sterically bulky o-dixylylbenzoate ligands with pyridine, 1-methylimidazole, or THF at apical sites readily react with O(2) to afford thermally labile peroxo intermediates that can be trapped and characterized spectroscopically at low temperatures (193 K). Cryogenic stopped-flow kinetic analysis of O(2) adduct formation carried out for the three complexes reveals that dioxygen binds to the diiron(II,II) center with concentration dependences and activation parameters indicative of a direct associative pathway. The pyridine and 1-methylimidazole intermediates decay by self-decomposition. However, the THF intermediate decays much faster by oxygen transfer to added PPh(3), the kinetics of which has been studied with double mixing experiments in a cryogenic stopped-flow apparatus. The results show that the decay of the THF intermediate is kinetically controlled by the dissociation of a THF ligand, a conclusion supported by the observation of saturation kinetic behavior with respect to PPh(3), inhibition by added THF, and invariant saturation rate constants for the oxidation of various phosphines. It is proposed that the proximity of the reducing substrate to the peroxide ligand on the diiron coordination sphere facilitates the oxygen-atom transfer. This unique investigation of the reaction of an O(2) adduct of a biomimetic tetracarboxylatodiiron(II,II) complex provides a synthetic precedent for understanding the electrophilic reactivity of like adducts in the active sties of nonheme diiron enzymes.     

Synthesis of oligonucleotides containing an O-G-alkyl-O-G interstrand cross-link

A methodology to synthesize oligonucleotides containing an alkyl interstrand cross-link between the two O6 atoms of deoxyguanosine has been developed. This cross-link is designed to serve as a stable structural mimic of the lesion formed in duplex DNA with the bifunctional alkylating agent hepsulfam. The O6-alkyl coupling is performed via a Mitsunobu reaction between a nucleoside and mono-protected 1,7-heptanediol. Solid-phase oligonucleotide synthesis using a nucleoside bis-phosphoramidite allows for the assembly of the cross-linked duplex. Sufficient quantities of this cross-linked duplex were obtained for various structural and biological investigations.     

Synthesis of new derivatives of 4-amino-2,4-dihydro-1,2,4-triazol-3-one as potential antibacterial agents

Thirty new 2-substituted-4-amino-5-alkyl or aryl-2,4-dihydro-1,2,4-triazol-3-ones and ten 2-substituted-5-alkyl or aryl-4-(5-nitro-2-furfurylidene)amino-2,4-dihydro-1,2,4-triazol-3-ones were synthesized and characterised by their sharp melting points, elemental analysis, ir and ¹H nmr spectra. These new derivatives of 5-nitro-2-furaldehyde were screened for their antibacterial activities. Most of the compounds showed good activity against one test organism, Staphylococcus aureus. For a few compounds, C.M.I. ranged from 4 to 8 μg/ml (higher results than nitrofurantoin).     

'Boomerang'-like insertion of a fusogenic peptide in a lipid membrane revealed by solid-state 19F NMR

Solid state (19)F NMR revealed the conformation and alignment of the fusogenic peptide sequence B18 from the sea urchin fertilization protein bindin embedded in flat phospholipid bilayers. Single (19)F labels were introduced into nine distinct positions along the wild-type sequence by substituting each hydrophobic amino acid, one by one, with L-4-fluorophenylglycine. Their anisotropic chemical shifts were measured in uniaxially oriented membrane samples and used as orientational constraints to model the peptide structure in the membrane-bound state. Previous (1)H NMR studies of B18 in 30% TFE and in detergent micelles had shown that the peptide structure consists of two alpha-helical segments that are connected by a flexible hinge. This helix-break-helix motif was confirmed here by the solid-state (19)F NMR data, while no other secondary structure (beta-sheet, 3(10)-helix) was compatible with the set of orientational constraints. For both alpha-helical segments we found that the helical conformation extends all the way to the respective N- and C-termini of the peptide. Analysis of the corresponding tilt and azimuthal rotation angles showed that the N-terminal helix of B18 is immersed obliquely into the bilayer (at a tilt angle tau approximately 54 degrees), whereas the C-terminus is peripherally aligned (tau approximately 91 degrees). The azimuthal orientation of the two segments is consistent with the amphiphilic distribution of side-chains. The observed 'boomerang'-like mode of insertion into the membrane may thus explain how peptide binding leads to lipid dehydration and acyl chain perturbation as a prerequisite for bilayer fusion to occur.     

Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)

The preparation and identification of a series of trifluoromethylated and bis(trifluoromethylated) precursors and monomers for bridge substituted trifluoromethylated poly(p-phenylenevinylene) (PPV) is reported. These monomers were prepared in several steps from terephthaldicarboxaldehyde and they contain symmetrical and unsymmetrical combinations of leaving groups and/or polarizers, including chlorides, sulfoxides, sulphones, tosylates and S-methyl (and also O-ethyl) xanthates. The electron withdrawing effect of the trifluoromethyl group dominated the regioselectivity of substitution, thus allowing the convenient and selective formation of unsymmetrically substituted products in high yield.