Theory of the two step enantiomeric purification of 1,3 dimethylallene

An application of a recently proposed [P. Kral et al., Phys. Rev. Lett. 90, 033001 (2003)] two step optical control scenario to the purification of a racemic mixture of 1,3 dimethylallene is presented. Both steps combine adiabatic and diabatic passage phenomena. In the first step, three laser pulses of mutually perpendicular linear polarizations, applied in a "cyclic adiabatic passage" scheme, are shown to be able to distinguish between the L and D enantiomers due to their difference in matter-radiation phase. In the second step, which immediately follows the first, a sequence of pulses is used to convert one enantiomer to its mirror-imaged form. This scenario, which only negligibly populates the first excited electronic state, proves extremely useful for systems such as dimethylallene, which can suffer losses from dissociation and internal conversion upon electronic excitation. We computationally observe conversion of a racemic mixture of dimethylallene to a sample containing approximately 95% of the enantiomer of choice.     

Spectral methods for the equations of classical density-functional theory: relaxation dynamics of microscopic films

We propose a numerical scheme based on the Chebyshev pseudo-spectral collocation method for solving the integral and integro-differential equations of the density-functional theory and its dynamic extension. We demonstrate the exponential convergence of our scheme, which typically requires much fewer discretization points to achieve the same accuracy compared to conventional methods. This discretization scheme can also incorporate the asymptotic behavior of the density, which can be of interest in the investigation of open systems. Our scheme is complemented with a numerical continuation algorithm and an appropriate time stepping algorithm, thus constituting a complete tool for an efficient and accurate calculation of phase diagrams and dynamic phenomena. To illustrate the numerical methodology, we consider an argon-like fluid adsorbed on a Lennard-Jones planar wall. First, we obtain a set of phase diagrams corresponding to the equilibrium adsorption and compare our results obtained from different approximations to the hard sphere part of the free energy functional. Using principles from the theory of sub-critical dynamic phase field models, we formulate the time-dependent equations which describe the evolution of the adsorbed film. Through dynamic considerations we interpret the phase diagrams in terms of their stability. Simulations of various wetting and drying scenarios allow us to rationalize the dynamic behavior of the system and its relation to the equilibrium properties of wetting and drying.     

Simultaneous liquid chromatographic determination of metals and organic compounds in pharmaceutical and food-supplement formulations using evaporative light scattering detection

A novel method for the non-derivatization liquid chromatographic determination of metals (potassium, aluminium, calcium and magnesium) and organic compounds (ascorbate and aspartate) was developed and validated based on evaporative light scattering detection (ELSD). Separation of calcium, magnesium and aluminium was achieved by the cation exchange column Dionex CS-14 and an aqueous TFA mobile phase according to the following time program: 0-6 min TFA 0.96 mL L⁻¹, 6-7 min linear gradient from TFA 0.96-6.4 mL L⁻¹. Separation of potassium, magnesium and aspartate was achieved by the lipophilic C₁₈ Waters Spherisorb column and isocratic aqueous 0.2 mL L⁻¹ TFA mobile phase. Separation of sodium, magnesium, ascorbate and citrate was also achieved by the C₁₈ analytical column, according to the following elution program: 0-2.5 min aqueous nonafluoropentanoic acid (NFPA) 0.5 mL L⁻¹; 2.5-3.5 min linear gradient from 0.5 mL L⁻¹ NFPA to 1.0 mL L⁻¹ TFA. In all cases, evaporation temperature was 70 °C, pressure of the nebulizing gas (nitrogen) 3.5 bar, gain 11 and the flow rate 1.0 mL min⁻¹. Resolution among calcium and magnesium was 1.8, while for all other separations was ≥3.2. Double logarithmic calibration curves were obtained within various ranges from 3-24 to 34-132 μg mL⁻¹, and with good correlation (r > 0.996). Asymmetry factor ranged from 0.9 to 1.9 and limit of detection from 1.3 (magnesium) to 17 μg mL⁻¹ (ascorbate).The developed method was applied for the assay of potassium, magnesium, calcium, aluminium, aspartate and ascorbate in pharmaceuticals and food-supplements. The accuracy of the method was evaluated using spiked samples (%recovery 95-105%, %R.S.D. < 2) and the absence of constant or proportional errors was confirmed by dilution experiments.     

Hydrophilic sulfonated bis-1,2,4-triazine ligands are highly effective reagents for separating actinides(iii) from lanthanides(iii) via selective formation of aqueous actinide complexes

We report the first examples of hydrophilic 6,6′-bis(1,2,4-triazin-3-yl)-2,2′-bipyridine (BTBP) and 2,9-bis(1,2,4-triazin-3-yl)-1,10-phenanthroline (BTPhen) ligands, and their applications as actinide(iii) selective aqueous complexing agents. The combination of a hydrophobic diamide ligand in the organic phase and a hydrophilic tetrasulfonated bis-triazine ligand in the aqueous phase is able to separate Am(iii) from Eu(iii) by selective Am(iii) complex formation across a range of nitric acid concentrations with very high selectivities, and without the use of buffers. In contrast, disulfonated bis-triazine ligands are unable to separate Am(iii) from Eu(iii) in this system. The greater ability of the tetrasulfonated ligands to retain Am(iii) selectively in the aqueous phase than the corresponding disulfonated ligands appears to be due to the higher aqueous solubilities of the complexes of the tetrasulfonated ligands with Am(iii). The selectivities for Am(iii) complexation observed with hydrophilic tetrasulfonated bis-triazine ligands are in many cases far higher than those found with the polyaminocarboxylate ligands previously used as actinide-selective complexing agents, and are comparable to those found with the parent hydrophobic bis-triazine ligands. Thus we demonstrate a feasible alternative method to separate actinides from lanthanides than the widely studied approach of selective actinide extraction with hydrophobic bis-1,2,4-triazine ligands such as CyMe₄-BTBP and CyMe₄-BTPhen.     

High‐throughput workflow for identification of phosphorylated peptides by LC‐MALDI‐TOF/TOF‐MS coupled to in situ enrichment on MALDI plates functionalized by ion landing

We report an MS‐based workflow for identification of phosphorylated peptides from trypsinized protein mixtures and cell lysates that is suitable for high‐throughput sample analysis. The workflow is based on an in situ enrichment on matrix‐assisted laser desorption/ionization (MALDI) plates that were functionalized by TiO₂ using automated ion landing apparatus that can operate unsupervised. The MALDI plate can be functionalized by TiO₂ into any array of predefined geometry (here, 96 positions for samples and 24 for mass calibration standards) made compatible with a standard MALDI spotter and coupled with high‐performance liquid chromatography. The in situ MALDI plate enrichment was compared with a standard precolumn‐based separation and achieved comparable or better results than the standard method. The performance of this new workflow was demonstrated on a model mixture of proteins as well as on Jurkat cells lysates. The method showed improved signal‐to‐noise ratio in a single MS spectrum, which resulted in better identification by MS/MS and a subsequent database search. Using the workflow, we also found specific phosphorylations in Jurkat cells that were nonspecifically activated by phorbol 12‐myristate 13‐acetate. These phosphorylations concerned the mitogen‐activated protein kinase/extracellular signal‐regulated kinase signaling pathway and its targets and were in agreement with the current knowledge of this signaling cascade. Control sample of non‐activated cells was devoid of these phosphorylations. Overall, the presented analytical workflow is able to detect dynamic phosphorylation events in minimally processed mammalian cells while using only a short high‐performance liquid chromatography gradient. Copyright © 2015 John Wiley & Sons, Ltd.     

A ditopic calix[6]arene ligand with N-methylimidazole and 1,2,3-triazole substituents: synthesis and coordination with Zn(II) cations

The first member of a new class of ditopic calix[6]arene has been synthesized, which is decorated with three N-methylimidazoles at the small rim and three 1,4-disubstituted-1,2,3-triazoles at the large rim. The coordination of a first Zn(II) cation selectively takes place at the small rim. Addition of a second equivalent results in the complexation of the three triazoles, providing a rare example of 1,2,3-triazole ligands embedded within a supramolecular system.     

Monitoring of amoxicilline and ceftazidime in the microdialysate of diabetic foot and serum by capillary electrophoresis with contactless conductivity detection

Determination of the broad-spectrum antibiotics amoxicilline (AMX) and ceftazidime (CTZ) in blood serum and microdialysates of the subcutaneous tissue of the lower limbs is performed using CE with contactless conductivity detection (C⁴D). Baseline separation of AMX is achieved in 0.5 M acetic acid as the background electrolyte and separation of CTZ in 3.2 M acetic acid with addition of 13% v/v methanol. The CE-C⁴D determination is performed in a 25 µm capillary with suppression of the EOF using INST-coating on an effective length of 18 cm and the attained migration time is 4.2 min for AMX and 4.4 min for CTZ. The analysis was performed using 20 µl of serum and 15 µl of microdialysate, treated by the addition of acetonitrile in a ratio of 1/3 v/v and the sample is injected into the capillary using the large volume sample stacking technique. The LOQ attained in the microdialysate is 148 ng/ml for AMX and 339 ng/ml for CTZ, and in serum 143 ng/ml for AMX and 318 ng/ml for CTZ. The CE-C⁴D method is employed for monitoring the passage of AMX and CTZ from the blood circulatory system into the subcutaneous tissue at the sites of diabetic ulceration in patients suffering from diabetic foot syndrome and also for measuring the pharmacokinetics following intravenous application of bolus antibiotic doses.     

An efficient approach to azirino and pyrrolo-fused dibenzazepines. Conformations of substituted dibenzo[c,f]pyrrolo[1,2-a]azepines

An effective approach to azepino-fused heterocycles is described. trans-1-Aryl-7,11b-dihydro-1H-azirino[1,2-a]dibenzo[c,f]azepines were synthesised via a domino sequence: isomerization of gem-dichloroaziridine-intramolecular Friedel-Crafts acylation of the tethered benzene ring catalysed by SnCl(4) and subsequent hydride induced intramolecular cyclization. Cycloaddition of dibenzazepinium ylides, generated by heating these aziridines, to activated C[double bond]C, C[triple bond]C dipolarophiles and fullerene C(60), leads to derivatives of dibenzo[c,f]pyrrolo[1,2-a]azepine. The reaction proceeds with complete stereoselectivity via cycloaddition of only W-ylide, which due to the high barrier does not undergo E,Z-isomerization under the reaction conditions. It was found that 2,3,9,13b-tetrahydro-1H-dibenzo[c,f]pyrrolo[1,2-a]azepine systems can exist in conformations of two types depending on the substituents at the pyrrolidine carbons in β-position with respect to nitrogen. Details of cycloaddition reactions and the conformational behavior of cycloadducts were studied by DFT calculations at the B3LYP/6-31G(d) level.     

1,2-diphosphaacenaphthene 1,2-dications: synthetic, stereochemical and computational study of the stabilising role of naphthalene-1,8-diyl backbone

Syntheses and full characterisation data (including single crystal diffraction) of three 1,2‐diphosphonium dicationic species with the naphthalene‐1,8‐diyl (Nap) backbone are reported. The oxidation of Nap[P(NMe₂)₂]₂ with P₂I₄ to its 1,2‐dication was achieved. meso‐ and rac‐forms of “all carbon” 1,2‐diphosphonium dications were obtained in good yields and purity by double alkylation of the parent diphosphine (1,2‐diphenyl‐1,2‐diphosphaacenaphthene) with methyl triflate or trimethyloxonium tetrafluoroborate. Each methylating reagent produces one of the rac‐ or meso‐forms of the dication diastereospecifically. Structural parameters of the new dications are discussed with respect to other phosphorus 1,2‐dications. DFT (B3LYP) computations revealed the significant role of the naphthalene backbone in stabilisation of the dicationic motif and helped to assess the energy cost of the steric clash of a variety of groups attached to the peri‐positions of naphthalene. The synthesis and single crystal X‐ray data of the extremely crowded Nap[P(?Se)(OiPr)₂]₂ are discussed, and are contrasted with the unsuccessful synthesis of Nap(PtBu₂)₂ from NapLi₂ and ClPtBu₂.     

A ferrocenyl‐substituted pseudo­titanocene complex

The title compound, (η⁵‐cyclo­penta­dienyl)[(1,2,3,4,5‐η)‐4‐ferro­cenyl‐1,2,5,6‐tetrakis­(tri­methyl­silyl)­cyclo­hexa‐2,4‐dien‐1‐yl]­titanium(II), [TiFe(C₅H₅)₂(C₂₃H₄₂Si₄)] or [Ti{η⁵‐C₆H₂{Fe­(η⁵‐C₅H₄)(η⁵‐C₅H₅)}{Si(CH₃)₃}₄}(η⁵‐C₅H₅)], possesses two directly linked metallocene units that subtend an angle of 52.9 (1)° (defined by the least‐squares planes of the directly connected π‐ligands) associated with the steric requirements of the bulky tri­methyl­silyl substituents. The cyclo­hexa­dienyl ligand adopts an envelope conformation; the perpendicular distance of its η⁵‐plane to the Ti atom is 1.512 (1) Å.