Ruthenium(II) 2,2′-bipyridine complexes incorporating substituted phenylazo-(2-(phenylthio))phenylmethine ancillary ligands. Synthesis,crystal structure,spectroscopic and redox properties

Abstract  

Five ruthenium complexes bearing phenylazo-(2-(phenylthio))phenylmethine ligands of the general type trans-[Ru^II(bpy)(L)(Cl)₂] (C1–C5) {L = YC₆H₄N=NC(COCH₃)=NC₆H₄(2-SC₆H₅), H (L1), Cl (L2), OCH₃ (L3), Br (L4), or NO₂ (L5)} have been synthesized. The crystal structure of trans-[Ru(bpy)(L1)(Cl)₂] (C1) is reported and shows no direct metal–S interaction. The complexes have been characterized through spectroscopic (IR, UV/vis and NMR) and electrochemical (CV) techniques. The electrochemical parameters (E _L(L)) of the azoimine ligands are reported.     

Preparation and characterisation of dual-layer latex-coated columns for open-tubular capillary electrochromatographic preconcentration of cations combined in-line with their separation by capillary electrophoresis

A dual-layer ion-exchange latex-coated column was prepared and characterised for on-capillary preconcentration of cations using an open-tubular ion-exchange CEC format. After preconcentration, the analyte cations were eluted with a transient isotachophoretic gradient and separated by CE. The latex double layer was established by first coating the negatively charged wall of the capillary with a layer of cationic quaternary ammonium anion-exchange Dionex AS5A latex particles (60 nm diameter), and then coating a layer of anionic sulphonated cation-exchange Dionex CS3 latex particles (300 nm diameter) onto the underlying AS5A layer. The adhesion of layers is based on electrostatic attractions. Several dual-layer capillaries were characterised for their EOF and ion-exchange capacity and this showed that coatings could be prepared reproducibly by a simple flushing procedure. The dual-layer columns exhibited a moderate, pH-independent EOF (ca. 26 x 10(-9 )m2V(-1)s(-1)) and an ion-exchange capacity of 57 microequiv./g (or 2.69 nequiv./column). Using an 8 cm length of coated capillary combined with a 72 cm length of untreated capillary, a method for on-line preconcentration and separation of monovalent organic bases, alkali metal ions and alkaline earth metal ions by CE was developed. Recoveries for the preconcentration step were 48% for 4-methylbenzylammonium, 43% for benzylammonium, 30-32% for alkali metal ions and 71-75% for alkaline earth cations. In all cases, recoveries were reproducible with RSDs being less than 6.2%. The influences of the ion-exchange selectivity coefficient of the analyte and the sample-loading rate on analyte recovery were also examined. The proposed method was utilised for the determination of alkaline earth cations and low microM detection limits were obtained.     

Preparation and characterisation of anion-exchange latex-coated silica monoliths for capillary electrochromatography

Silica monoliths coated with functionalised latex particles have been prepared for use in monolithic ion-exchange capillary electrochromatography (IE-CEC) for the separation of inorganic anions. The ion-exchange monoliths were prepared using 70 nm quaternary ammonium, anion-exchange latex particles, which were bound electrostatically to a monolithic silica skeleton synthesised in a fused silica capillary. The resulting stationary phases were characterised in terms of their chromatographic performance and capacity. The capacity of a 50 microm diameter 25 cm latex-coated silica monolith was found to be 0.342 nanoequivalents and 80,000 theoretical plates per column were typically achieved for weakly retained anions, with lower efficiency being observed for analytes exhibiting strong ion-exchange interaction with the stationary phase. The electroosmotic flow (EOF) was reversed after the latex-coating was applied (-25.96 m2 V(-1) s(-1), relative standard deviation (RSD) 2.8%) and resulted in anions being separated in the co-EOF mode. Ion-exchange interactions between the analytes and the stationary phase were manipulated by varying the ion-exchange selectivity coefficient and the concentration of a competing ion (phosphate or perchlorate) present in the electrolyte. Large concentrations of competing ion (greater than 1M phosphate or 200 mM perchlorate) were required to completely suppress ion-exchange interactions, which highlighted the significant retention effects that could be achieved using monolithic columns compared to open tubular columns, without the problems associated with particle-packed columns. The latex-coated silica monoliths were easily produced in bulk quantities and performed reproducibly in acidic electrolytes. The high permeability and beneficial phase ratio makes these columns ideal for micro-LC and preconcentration applications.     

Hydride transfer versus hydrogen radical transfer in thymidylate synthase

The nature of a H-transfer in the thymidylate synthase catalyzed reaction was investigated by comparison of the wild-type enzyme with the W80M mutant. The nature of the H-transfer was not affected, as indicated by intrinsic isotope effects and their temperature dependence. These findings support a single-step hydride transfer instead of a two-step radical transfer.     

Separation of antidepressants by capillary electrophoresis with in-line solid-phase extraction using a novel monolithic adsorbent

The separation of three selective serotonin reuptake inhibitors (SSRIs) by capillary electrophoresis (CE) with fully integrated solid-phase extraction (SPE) is described. Polymeric monolithic SPE modules were prepared in situ within a fused silica capillary from either butyl methacrylate-co-ethylene dimethacrylate or 3-sulfopropyl methacrylate-co-butyl methacrylate-co-ethylene dimethacrylate. Using a 1 cm SPE module placed at the inlet of the capillary, a mixture of sertraline, fluoxetine and fluvoxamine was extracted from aqueous solution by applying a simple pressure rinse. Under pressure-driven conditions, efficient elution was possible from both SPE materials investigated using 50 mM phosphate buffer, pH 3.5 in acetonitrile (20/80, v/v). Two different strategies were investigated for the efficient elution and subsequent CE separation. Injection of an aqueous sample plug directly into the non-aqueous elution/separation buffer was found to be unsuitable with poor elution profiles observed in the electrodriven mode. Alternatively, a sample plug equivalent to several capillary volumes could be injected by pressure followed by filling the capillary with the non-aqueous elution/separation buffer from the outlet end using a combination of pressure and electrodriven flow. Using a neutral monolith, efficient elution/separation was not possible due to an unstable electroosmotic flow (EOF), however, by adding the ionisable monomer, 3-sulfopropyl methacrylate to the SPE module to increase and stabilise the EOF, it was possible to achieve efficient elution from the SPE module, followed by baseline separation by CE using a 200 mM acetate buffer, pH 3.5 in acetonitrile (10/90, v/v). With enrichment factors of over 500 achieved for each of the analytes this demonstrates the potential of in-line SPE-CE for the sensitive analysis of these drugs.     

Some remarks on elliptic problems with critical growth in the gradient

In this work we analyze existence, nonexistence, multiplicity and regularity of solution to problem

(1)     

Competition reaction-absorption in some elliptic and parabolic problems related to the Caffarelli-Kohn-Nirenberg inequalities

We consider the following elliptic problem:

(1)     

Finite-time semistability,Filippov systems,and consensus protocols for nonlinear dynamical networks with switching topologies

This paper focuses on semistability and finite-time semistability for discontinuous dynamical systems. Semistability is the property whereby the solutions of a dynamical system converge to Lyapunov stable equilibrium points determined by the system initial conditions. In this paper, we extend the theory of semistability to discontinuous autonomous dynamical systems. In particular, Lyapunov-based tests for strong and weak semistability as well as finite-time semistability for autonomous differential inclusions are established. Using these results we then develop a framework for designing semistable and finite-time semistable protocols for dynamical networks with switching topologies. Specifically, we present distributed nonlinear static and dynamic output feedback controller architectures for multiagent network consensus and rendezvous with dynamically changing communication topologies.     

Finding the shortest path with honey-bee mating optimization algorithm in project management problems with constrained/unconstrained resources

Effective project management requires the development of a realistic plan and a clear communication of the plan from the beginning to the end of the project. The critical path method (CPM) of scheduling is the fundamental tool used to develop and interconnect project plans. Ensuring the integrity and transparency of those schedules is paramount for project success. The complex and discrete nature of the solution domain for such problems causes failing of traditional and gradient-based methods in finding the optimal or even feasible solution in some cases. The difficulties encountered in scheduling construction projects with resource constraints are highlighted by means of a simplified bridge construction problem and a basic masonry construction problem. The honey-bee mating optimization (HBMO) algorithm has been previously adopted to solve mathematical and engineering problems and has proven to be efficient for searching optimal solutions in large-problem domains. This paper presents the HBMO algorithm for scheduling projects with both constrained and unconstrained resources. Results show that the HBMO algorithm is applicable to projects with or without resource constraints. Furthermore, results obtained are promising and compare well with those of well-known heuristic approaches and gradient-based methods.