Fractal flux jumps in an organic superconducting crystal

Angle dependant torque magnetization measurements have been carried out on the organic superconductor, κ-(ET)₂Cu(NCS)₂ at extremely low temperatures (25-300 mK). Magneto-thermal instabilities are observed in the form of abrupt magnetization (flux) jumps for magnetic field sweeps of 0-20 T. A fractal analysis of the flux jumps indicate that the instabilities do show a self similar structure with a fractal dimension of varying between 1.15 and 1.6. The fractal structure of the flux jumps in our sample shows a striking similarity to that of MgB₂ thin film samples, in which magneto-optical experiments have recently shown that the small flux jumps are due to the formation of dendritic flux structures. These smaller instabilities act to suppress the critical current density of the thin films. The similarity of the flux jump structure of our samples suggests that we may also observing the dendritic instability, but in a bulk sample rather than a thin film. If true, this is the first observation of the dendritic instability in a bulk superconducting sample, and is likely due to the layered nature of κ-(ET)₂Cu(NCS)₂, which results in a quasi-two dimensional flux structure over the majority it's mixed state phase diagram.     

Size Distribution Evolution of NiO x H y and Au: NiO x H y Sols

The present work reports on the preparation of nickel oxi/hydroxide and gold composite nanoparticulate sols. The precursor was prepared as an alcoholic suspension of nickel oxi/hydroxide. Controlled amounts of 2,4-pentanedione (AcAc) were added to the nickel salt suspension and lead to the formation of a nickel complex. The dependence of the particle size with AcAc titration was followed by Small Angle X-Ray Scattering (SAXS). The results showed that the particle size distribution shifts towards low values with the increase in the AcAc concentration. The complex, obtained by adding an excess of the AcAc ligand, [Ni(AcAc)₂]·2H₂O, was identified by FTIR spectroscopy and X-ray diffraction. An AcAc specific volume was chosen in order to obtain a homogeneous sol of nickel oxi/hydroxide to which gold was added. The size distribution of the Au particles in this sol was followed by SAXS.     

Field-induced confinement in (TMTSF)2ClO4 under accurately aligned magnetic fields

We present transport measurements along the least conducting c direction of the organic superconductor (TMTSF)₂ClO₄  performed under an accurately aligned magnetic field in the low temperature regime. The experimental results reveal a two-dimensional confinement of the carriers in the (a, b) planes which is governed by the magnetic field component along the b^′ direction. This 2-D confinement is accompanied by a metal-insulator transition for the c axis resistivity. These data are supported by a quantum mechanical calculation of the transverse transport taking into account in self consistent treatment the effect of the field on the interplane Green function and on the intraplane scattering time.     

A novel ion chromatographic method based on cation-exchange and acid-base interactions for the simultaneous determination of total alkalinity and monovalent cations in samples of microliter volume

An ion chromatographic (IC) method based on the use of titrant (strong acid) as the stationary phase was developed for simultaneous determination of total alkalinity (TA) and monovalent cations. The titrant used in this study was obtained by initially loading lithium dodecylsulfate (Li-DS) onto a reversed-phase material and then conditioning the column with a slightly acidified aqueous LiCl solution (a mixture of 50.0 mM LiCl and 0.1 mM H2SO4). When a small amount of a basic sample was injected onto a column prepared in this way, the basic species (Bn-) reacted predominantly with H+ on the stationary phase and the reaction with the eluent phase was negligible due to the very low concentration of eluent H+ (in the eluent, a molar ratio of [Li+]/[H+] = 250:1 applied). The stationary phase H+ consumed in the acid-base reaction was then re-supplied by H+ from the eluent. By monitoring the conductance of the eluent using conductivity, an induced peak resulting from the basic species was observed. Calibration graphs of peak areas vs. molar concentration of the basic species for OH-, HCO3- and H2PO4- were found to be identical. CO3(2-), HPO4(2-), and B4O7(2-) also gave identical calibration curves but their slope values were twice those for HCO3-. The detection limit for HCO3- was less than 3.2 microM and the calibration curve was linear up to 12.3 mM (injection volume, 100 microL). Seawater was directly analyzed and its total alkalinity was found to be 2.87 mM (RSD 0.53%, n = 5), which was in good agreement with the result of 2.88 mM (RSD 3.2%, n = 5) obtained using auto-potentiometric titration. Na+ and K+ were determined simultaneously and the concentrations were 481.6 and 10.6 mM, respectively.     

Simultaneous determination of monofluoroacetate, difluoroacetate and trifluoroacetate in environmental samples by ion chromatography

A method is reported for the sensitive, simultaneous determination of mono- (MFA), di- (DFA), and trifluoroacetates (TFA) by ion chromatography (IC). These species were separated using a Dionex AS17 anion-exchange column employed with a potassium hydroxide gradient (via a Dionex EG40 eluent generator) and suppressed conductivity detection. The fluoroacetates were successfully separated from a range of inorganic and organic species likely to be present in environmental samples, in a total analysis time of 35 min (including re-equilibration of the column). Detection limits for mono-, di- and trifluoroacetate were 21, 38 and 36 microg/l, respectively, determined using a signal-to-noise ratio of 3, and were obtained using a sample injection volume of 50 microl. Precision was less than 0.83% relative standard deviation (RSD) for replicate injections performed over a period of 30 days. The method was applied to the determination of monofluoroacetate in river water samples and also in carrot baits.     

Mixed pseudohalide complexes of copper(II). Crystal and molecular structure of [Cu(N3)(NCS)(tmen)] n and of [Cu(N3)(NCO)(tmen)]2 (tmen = N,N,N′,N′-tetramethylethylenediamine)

The compounds [Cu(N₃)(NSC)(tmen)]_n (1), [Cu(N₃)(NCO)(tmen)]_n (2) and [Cu(N₃)(NCO)(tmen)]₂ (3) (tmen=N,N,N′,N′-tetramethylethylenediamine) were synthesized and studied by i.r. spectroscopy. Single crystals of compounds (1) and (3) were obtained and characterized by X-ray diffraction. The structure of compound (1) consists of neutral chains of copper(II) ions bridged by a single azido ligand showing the asymmetric end-to-end coordination fashion. Each copper ion is also surrounded by the other three nitrogen atoms; two from one N,N,N′,N′-tetramethylethylenediamine and one from a terminal bonded thiocyanate group. Compound (2) decomposes slowly in acetone and the product formed [Cu(N₃)(NCO)(tmen)]₂ (3) crystallizes in the monoclinic system (P2₁). The structure of (3) consists of dimeric units in which the Cu atoms are penta-coordinated and connected by μ(1,3) bridging azido and cyanate ligands. In both cases the five coordinated atoms give rise to a slightly distorted square-based pyramid coordination geometry at each copper ion. The thermal behavior of [Cu(N₃)(NSC)(tmen)]_n (1) and [Cu(N₃)(NCO)(tmen)]_n (2) were investigated and the final decomposition products were identified by X-ray powder diagrams.     

Determination of flavour components in natural vanilla extracts and synthetic flavourings by mixed micellar electrokinetic capillary chromatography

The development of a mixed micellar electrokinetic capillary chromatography (MECC) method for the qualitative and quantitative determination of key components, including vanillin, 4-hydroxybenzaldehyde, 4-hydroxybenzoic acid, vanillic acid and 3-methoxybenzaldehyde, that contribute to vanilla flavour was investigated. The micellar phase consisted of sodium dodecyl sulfate (SDS) and sodium cholate (SC). The percent relative standard deviation (R.S.D.%) for migration time was <1 over six runs. The R.S.D.% for peak areas ranged between 0.85-1.96% over six runs. Peak efficiencies were excellent with theoretical plate numbers typically in the range of 130,000-200,000 per column (52 cm effective length). The limits of detection (LOD) were between 5-10 μg/ml. The quantitative data was verified by high performance liquid chromatography (HPLC) and gas chromatography (GC). The mixed MECC method was successfully applied to a number of natural vanilla extracts, nature identical extracts and synthetic flavourings.     

Retention behavior of alkali, alkaline earth and transition metal cations in ion chromatography with an unmodified silica gel column

An unmodified silica gel (Develosil 30-5) column (150×4.6 mm I.D.) has been applied to the ion chromatographic separation of alkali, alkaline earth and transition metal cations. The retention behavior of the above cations on the bare substrate was investigated using a number of weak inorganic and organic acid eluents. During this investigation, several separations were achieved and the most suitable eluent conditions were identified. It was concluded that: (a) 1.5 mM HNO₃-0.5mM pyridine-2,6-dicar☐ylic acid eluent was the most effective for the simultaneous separation of common alkali and alkaline earth metal cations, (b) 1.5 mM oxalic acid eluent resulted in the best separation of alkali, alkaline earth, and transition metal cations, (c) 0.5 mM CuSO₄ eluent could be used for the separation of alkali metal cations alone and (d) 0.5 mM ethylenediamine-oxalic acid eluent at pH 5.5 resulted in themost efficient separation of both alkaline earth and transition metal cations.