Effect of temperature on the chromatographic retention of ionizable compounds. III. Modeling retention of pharmaceuticals as a function of eluent pH and column temperature in RPLC

We propose a general simple equation for accurately predicting the retention factors of ionizable compounds upon simultaneous changes in mobile phase pH and column temperature at a given hydroorganic solvent composition. Only four independent experiments provide the input data: retention factors measured in two pH buffered mobile phases at extreme acidic and basic pH values (e. g., at least +/- 2 pH units far from the analyte pK(a)) and at two column temperatures. The equations, derived from the basic thermodynamics of the acid-base equilibria, additionally require the knowledge of the solute pK(a )and enthalpies of acid-base dissociation of both the solute and the buffer components in the hydroorganic solvent mixture. The performance of the predictive model is corroborated with the comparison between theoretical and experimental retention factors of several weak acids and bases of important pharmacological activity, in mobile phases containing different buffer solutions prepared in 25% w/w ACN in water and at several temperatures.     

Energy balance in dense microemulsions

A water-in-oil microemulsion composed of water, AOT and decane with volume fraction φ=0.50 and molar ratio X=40.8 was analysed by DSC. The percolation and the bicontinuous transitions as well as the melting endotherms and the freezing exotherms were measured. The main attention was focussed on the system energy balance. It was found that, by freezing the samples after the occurrence of the percolative transition, the total heat released is significantly less than the heat absorbed in the melting endotherms. A simple geometrical model was used as an analysis tool of the aforementioned energy difference. Since the system studied exhibits a percolative transition of dynamic type, on approaching the percolation threshold temperature (T≤T _p) and a static percolation for T≥T _p, the structural change from the connecting water-droplet-cluster to a connecting water channel was schematised in the model as a change from a sphere-necklace to a water-cylindrical channel of equal volume and equal length. The surface energy associated with the formation of the two different geometrical surfaces was evaluated and the amount of saved energy compared with the experimentally measured one.     

Rapid screening of membrane protein activity: electrophysiological analysis of OmpF reconstituted in proteoliposomes

Solvent-free planar lipid bilayers were formed in an automatic manner by bursting of giant unilamellar vesicles (GUVs) after gentle suction application through micron-sized apertures in a borosilicate glass substrate. Incubation of GUVs with the purified ion channel protein of interest yielded proteoliposomes. These proteoliposomes allow for immediate recording of channel activity after GUV sealing. This approach reduces the time-consuming, laborious and sometimes difficult protein reconstitution processes normally performed after bilayer formation. Bilayer recordings are attractive for investigations of membrane proteins not accessible to patch clamp analysis, like e.g. proteins from organelles. In the presented work, we show the example of the outer membrane protein OmpF from Escherichia coli. We reconstituted OmpF in proteoliposomes and observed the characteristic trimeric conductance levels and the typical gating induced by pH and transmembrane voltage. Moreover, OmpF is the main entrance for beta-lactam antibiotics and we investigated translocation processes of antibiotics and modulation of OmpF by spermine. We suggest that the rapid formation of porin containing lipid bilayers is of potential for the efficient electrophysiological characterization of the OmpF protein, for studying membrane permeation processes and for the rapid screening of antibiotics.     

Aquation of the ruthenium-based anticancer drug NAMI-A: a density functional study

We carried out density functional theory (DFT) calculations to investigate the thermodynamics and the kinetics of the double aquation reaction of the anticancer drug NAMI-A. Three explicit water molecules were included in the calculations to improve the PB solvation energies. Our calculations show that the chloride substitution reactions on the considered Ru(III) octahedral complex follow a dissociative interchange mechanism, I(d), passing through a loose heptacoordinate transition state. We calculated an activation enthalpy and free energy for the first aquation step of 101.5 and 103.7 kJ mol(-1), respectively, values that are in good agreement with the available experimental results. The activation enthalpy and free energy for the second aquation step were found significantly higher, 118.7 and 125.0 kJ mol(-1), again in agreement with the experimental evidence indicating a slower rate for the second aquation.     

Concentration as the switch for chiral recognition in biomembrane models

Chiral recognition was observed in a biomembrane model. Micellar aggregates formed by enantiopure N-alkyl-N,N-dimethyl-N-(1-phenyl)ethylammonium bromide were in fact able to convert the racemic mixture of bilirubin-IXalpha into an enantiomerically enriched mixture. The stereochemical preference and the extent of enantiomeric enrichment depend on the length of the hydrophobic portion of the surfactant and on the concentration conditions, and changes in the stereochemical bias are reversible.     

Composite planar electrode for sensing electrochemical oxygen demand

This work reports on the development of a graphite-polystyrene composite electrode of planar configuration, containing silver(II) oxide and copper(II) oxide catalysts (AgO-CuO), for the measurement of electrochemical oxygen demand (EOD). Optimisation studies of the composite composition as well as conditions for its processing on planar substrates and generation of an appropriate electrochemical active area resulted in the scalable fabrication of robust composite electrodes. These were evaluated with glucose as target analyte. They showed competitive low limits of detection in a linear concentration range from 5 mg L⁻¹ to 1400 mg L⁻¹ of O₂. Besides, they were stable for at least one year. The determination of EOD in wastewater samples coming from production lines of parenteral food and winemaking was successfully carried out.     

Monitoring of malolactic fermentation in wine using an electrochemical bienzymatic biosensor for l-lactate with long term stability

l-lactic acid is monitored during malolactic fermentation process of wine and its evolution is strongly related with the quality of the final product. The analysis of l-lactic acid is carried out off-line in a laboratory. Therefore, there is a clear demand for analytical tools that enabled real-time monitoring of this process in field and biosensors have positioned as a feasible alternative in this regard. The development of an amperometric biosensor for l-lactate determination showing long-term stability is reported in this work. The biosensor architecture includes a thin-film gold electrochemical transducer selectively modified with an enzymatic membrane, based on a three-dimensional matrix of polypyrrole (PPy) entrapping lactate oxidase (LOX) and horseradish peroxidase (HRP) enzymes. The experimental conditions of the biosensor fabrication regarding the pyrrole polymerization and the enzymes entrapment are optimized. The biosensor response to l-lactate is linear in a concentration range of 1 × 10⁻⁶–1 × 10⁻⁴ M, with a detection limit of 5.2 × 10⁻⁷ M and a sensitivity of – (13500 ± 600) μA M⁻¹ cm⁻². The biosensor shows an excellent working stability, retaining more than 90% of its original sensitivity after 40 days. This is the determining factor that allowed for the application of this biosensor to monitor the malolactic fermentation of three red wines, showing a good agreement with the standard colorimetric method.     

Suberythemal Sun Exposures at Swedish Schools Depend on Sky Views of the Outdoor Environments – Possible Implications for Pupils’ Health

More scheduled outdoor stay is increasingly advocated for school children. This study measured 2^nd, 5^th and 8^th graders’ erythemal UV‐exposure in September, March and May at four Swedish schools. We related those exposures, as fractions of total available ambient radiation, to the schools outdoor environments differing in amount of shade, vegetation, and peripheral city‐scape quantified as percentage of free sky view calculated from fish‐eye photographs. Exposures correlated with the sky views (with exceptions in May) and were suberythemal. The exposures were also below the threshold limit of the International Commission on Non‐Ionizing Radiation Protection (ICNIRP) for hazard evaluation of UVR but were potentially enough for adequate vitamin D formation according to a cited model calculation – as illustrated in the results and discussed. The school environments, typical in southern and middle Sweden, offer enough shade to protect children from overexposure during seasons with potentially harmful solar UV radiation. Pupils’ outdoor stay may be extended during September and March. In May extended outdoor stay of the youngest pupils requires a more UVR‐protective environment.     

Binding of antitumor ruthenium complexes to DNA and proteins: a theoretical approach

The thermodynamics of the binding of the antitumor ammine, amine, and immine complexes of ruthenium(II) and ruthenium(III) to DNA and peptides was studied computationally using model molecules. We performed density functional calculations on several monofunctional ruthenium complexes of the formula [Ru(NH3)5B]z+, where B is an adenine, guanine, or cytosine nucleobase or an 4-methylimidazole, a dimethylthioether, or a dimethylphosphate anion and z = 2 and 3. The pentammineruthenium fragment has been intensively studied and also constitutes a good model for a wide class of antitumor ammine, amine, and imine complexes of Ru(II) and Ru(III), while the considered bases/ligands have been chosen as models for the main binding sites of DNA, nucleobases, and phosphate backbone and proteins, histidyl, and sulfur-containing residue such as methionine or cysteine. Bond dissociation enthalpies and free energies have been calculated for all the considered metal binding sites both in the gas phase and in solution and allow building a binding affinity order for the considered nucleic acid or protein binding sites. The binding of guanine to some bifunctional complexes, [Ru(NH3)(4)Cl2], [cis-RuCl(2)(bpy)2], and [cis-RuCl(2)(azpy)2], has also been considered to evaluate the effect of a second labile chloro or aquo ligand and more realistic polypyridyl and arylazopyridine ligands.