超高分子量PE凝胶膜的超拉伸性与旁式构象关系研究

通过ＩＲ方法，观测并讨论了在不同条件下制备的超高分子量ＰＥ（ＷＨＭＰＥ）凝胶膜中旁式（Ｇ构象）构象与超拉伸性的关系，提出了Ｇ构象浓度及分布对ＵＨＭＰＥ凝胶膜超拉伸性影响的新概念，同时也讨论了它与链缠结之间的联系，发现：反映Ｇ构象的相对浓度的比值σ＝Ｉ１３０３Ｉ１３５２随制膜浓度的增大而增加，在临界浓度Ｃ０（０．４～０．５ｇ＠１００ｍｌ）附近所形成的膜，具有超高拉伸性（λ＝２００），其Ｇ构象的变化与Ｍａｔｓｕｏ由比浓粘度提出的缠结链改变相对应；热处理温度比热处理时间对σ值的影响更显著，在一定温度下约４分钟后σ值基本不变；在σ值最低的温度范围拉伸，凝胶膜具有良好的超高拉伸性．     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

单核铁(Ⅲ)双卟啉配合物在溶液中的构象平衡及其对环己烷羟化反应的催化活性的影响

合成及表征了一系列以柔韧碳氢链相连不同长度的ｐ／ｐ型单核铁（Ⅲ）双卟啉配合物，以可见光谱首次观察到该系列配合物在氯仿溶液中开放式及闭合式构象的平衡，发现６８０ｎｍ处吸收峰强度与这种构象平衡有关，烷氧链越长，该吸收峰强度越大．利用该类配合物模拟了细胞色素Ｐ４５０单加氧酶对环己烷的羟化作用，催化结果表明，在以分子氧为氧源及还原剂存在的温和条件下，该类配合物的催化活性显著高于单核铁卟啉（ＦｅＴＰＰＣｌ），随着柔韧碳氢链长度的增加，双卟啉的催化活性依次增加．高的催化活性与双卟啉配合物在溶液中的构象平衡，即闭合式构象引起的立体位阻及电子转移有关．     

Synthesis of N-（α-Alkoxyalkyl）benzotriazoles Catalyzed by Acidic Ionic Liquid at Room Temperature

N-（α-Alkoxyalkyl）benzotriazoles were synthesized via the condensation of benzotriazole with various aldehydes and alcohols catalyzed by acidic ionic liquid [hmim]HSO4 at room temperature. The yield was up to 99%. This novel method was effective when triethoxymethane was utilized instead of alcohols. Moreover, acidic ionic liquid could be reused easily with no significant degradation of its catalytic activity.     

THE EFEFCT OF MAGNETIC FIELD ON POLYMERIZATION OF STYRENE IN THE PRESENCE OF POLYVINYL NAPHTHALENE AND POLYVINYL BENZOPHENONE

In the process of bulk photopolymerization of styrene initiated by AIBN decomposition polyvinyl benzophenone (PVB) can supply an effective cage for triplet-triplet energy transfer between PVB macromolecules and small molecules of AIBN to influence the molecular weight of polystyrene in weak magnetic field (less than 0.035T), that was different from the case of polyvinyl naphthalene (PVN) which supplied cages for this system only in the stronger magnetic field (more than 0.2 T) studies. It was found that in the same conditions, PVN could exert more tremendous influences on the bulk photopolymerizatiou system of styrene than PVB because in the stronger magnetic field the triplet PVN had much longer life time than PVB.     

Crystal Structure of (6S,9S,13R,14S)-7,8-Didehydro-3,7-dimethoxy-17-methylmorphinan-4,6-diol

1 INTRODUCTION (9S,13R,14S)-7,8-Didehydro-3,7-dimethoxy-4-hydroxy-17-methylmorphinan-6-one I is an impor- tant natural product that was used to ease pain, decrease blood pressure and diminish inflammation. In order to study the stereochemistry of the reduction of I with potassium boronhydride, the crystal structure of the title compound II was determined by X-ray diffraction method. 2 EXPERIMENTAL 2. 1 Instrument The melting point was measured on a Yanagimoto MP-500 apparatus…     

A numerical method using the Prfer transformation for the calculation of eigenpairs of two-parameter Sturm-Liouville problems

A shooting method for coupled Prfer equations is discussedfor numerical solution of two-parameter Sturm-Liouville problems. Research supported in part by grants from the NSERC of Canada.     

Ni／γ—Al2O3,Ni／MgO,Ni／SiO2催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ，ＵＶ－ＤＲＳ，ＸＰＳ，ＴＰＲ，Ｈ２－Ｏ２滴定和吡啶吸附－红外光谱等技术，研究了负载于具有不同酸碱性的γ－Ａｌ２Ｏ３，ＳｉＯ２，Ｍｇｏ载体上的镍催化剂表面物理化学性质，及其对甲烷与二氧化碳重整制取合成气反应催化活性的影响。结果表明，在上述负载型镍催化剂上，影响重整反应活性和积炭量的主要原因不是催化剂表面酸碱性，而是金属镍在催化剂表面的分散度。     

Aa1Dd1-Aa2Dd2型氢键体系的网络结构参数

利用溶胶-凝胶分配理论对氢键溶液的模型体系进行研究, 给出了体系的凝胶化条件以及凝胶点后氢键网络中各类结构参数的计算方案, 并进行了相应的数值计算. 结果表明, 当两类质子受体基团的活性不同时, 质子受体基团的竞争作用对网络结构有一定影响. 这为控制氢键网络结构特征提供了可能的理论线索.     

Facile Ionic Liquids-Promoted One-Pot Synthesis of Polyhydroquinoline Derivatives under Solvent Free Conditions

In recent years, much attention has been directed towards the syntheses of 1,4-dihydropyridyl compounds due to the fact that 1,4-dihydropyridyl compounds possess a variety of biological activities.[1] In view of the importance of polyhydroquinoline derivatives, many classical methods for the synthesis of polyhydroquinoline derivatives were reported[2] by conventional heating and refluxing approaches in the presence of organic solvent. These methods, however, involve long reaction time, harsh reaction conditions, the use of a large quantity of organic solvent and unsatisfactory yields. Therefore,improvements in such syntheses have been sought continuously.