Diffraction aperture non-ideal behaviour of air coupled transducers array elements designed for NDT

Air coupled piezoelectric ultrasonic array transducers are a novel tool that could lead to interesting advances in the area of non-contact laminar material testing using Lamb wave's propagation techniques. A key issue on the development of such transducers is their efficient coupling to air media (impedance mismatch between the piezoelectric material and air is 90 dB or more). Adaptation layers are used in order to attain good matching and avoid possible serious signal degradation. However, the introduction of these matching layers modify the transducer surface behaviour and, consequently, radiation characteristics are altered, making the usual idealization criteria (of uniform surface movement) adopted for field simulation purposes inaccurate. In our system, we have a concave linear-array transducer of 64 elements (electrically coupled by pairs) working at 0.8 MHz made of PZ27 rectangular piezoceramics (15 mm x 0.3 mm) with two matching layers made of polyurethane and porous cellulose bonded on them. Experimental measurements of the acoustic aperture of single excited array elements have shown an increment on the geometrical dimensions of its active surface. A sub-millimeter vibrometer laser scan has revealed an extension of the aperture beyond the supposed physical single array element dimensions. Non-uniform symmetric apodized velocity surface vibration amplitude profile with a concave delay contour indicates the presumed existence of travelling wave phenomena over the surface of the outer array matching layer. Also, asymptotic propagation velocities around 2500 m/s and attenuation coefficient between 15 and 20 dB/mm has been determined for the travelling waves showing clear tendencies. Further comparisons between the experimental measurements of single array element field radiation diagram and simulated equivalent aperture counterpart reveal good agreement versus the ideal (uniform displaced) rectangular aperture. For this purpose an Impulse Response Method (IRM) has been used.     

Delayed feedback control of phase synchronisation in a neuronal network model

The human cerebral cortex can be separated into cortical areas forming a clustered network structure. We build two different clustered networks, where one network is based on a healthy brain and the other according to a brain affected by a neurodegenerative process. Each cortical area has a subnetwork with small-world properties. We verify that both networks exhibit rich-club organisation and phase synchronisation. Due to the fact that neuronal synchronisation can be related to brain diseases, we consider the delayed feedback control as a method to suppress synchronous behaviours. In this work, it is presented that depending on the feedback parameters, intensity and time delay, phase synchronisation in both networks can be suppressed. Therefore, one of our main results is to show that delayed feedback control can be used to suppress undesired synchronous behaviours not only in the healthy brain, but also in the brain marked by neurodegenerative processes.     

Field sources in a Lorentz-symmetry breaking scenario with a single background vector

The present work is a generalization of the recent work [arXiv.1206.1420] on the modified Hawking temperature on the event horizon. Here the Hawking temperature is generalized by multiplying the modified Hawking temperature by a variable parameter \(\alpha \) representing the ratio of the growth rate of the apparent horizon to that of event horizon. It is found that both the first and the generalized second law of thermodynamics are valid on the event horizon for any fluid distribution. Subsequently, the Bekenstein entropy is modified on the event horizon and the thermodynamical laws are examined. Finally, an interpretation of the parameters involved is presented.     

A cosmological concordance model with dynamical vacuum term

We demonstrate that creation of dark-matter particles at a constant rate implies the existence of a cosmological term that decays linearly with the Hubble rate. We discuss the cosmological model that arises in this context and test it against observations of the first acoustic peak in the cosmic microwave background (CMB) anisotropy spectrum, the Hubble diagram for supernovas of type Ia (SNIa), the distance scale of baryonic acoustic oscillations (BAO) and the distribution of large scale structures (LSS). We show that a good concordance is obtained, albeit with a higher value of the present matter abundance than in the ΛCDM model. We also comment on general features of the CMB anisotropy spectrum and on the cosmic coincidence problem.     

Aza‐Diels–Alder reaction between cyclopentadiene and protonated N‐phenylethyliminoacetates of 8‐phenylmenthol and 8‐phenylneomenthol: a density functional theory study

The cycloaddition between glyoxylate imines possessing two chiral auxiliaries, N‐(R)‐ or N‐(S)‐1‐phenylethyl and 8‐phenylmenthyl or 8‐phenylneomenthyl, and cyclopentadiene is described. Computational calculations using density functional theory with the Becke, three‐parameter, Lee–Yang–Parr functional and the 6‐31G(d) basis set were performed to better understand the highly diastereoselective mechanism and the exo‐selectivity observed experimentally for these ionic aza‐Diels–Alder reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance of a combined three-hole conductivity probe for void fraction and velocity measurement in air–water flows

The development of a three-hole pressure probe with back-flushing combined with a conductivity probe, used for measuring simultaneously the magnitude and direction of the velocity vector in complex air–water flows, is described in this paper. The air–water flows envisaged in the current work are typically those occurring around the rotors of impulse hydraulic turbines (like the Pelton and Cross-Flow turbines), where the flow direction is not known prior to the data acquisition. The calibration of both the conductivity and three-hole pressure components of the combined probe in a rig built for the purpose, where the probe was placed in a position similar to that adopted for the flow measurements, will be reported. After concluding the calibration procedure, the probe was utilized in the outside region of a Cross-Flow turbine rotor. The experimental results obtained in the present study illustrate the satisfactory performance of the combined probe, and are encouraging toward its use for characterizing the velocity field of other complex air–water flows.     

An analysis of Taguchi's on‐line quality monitoring procedure for attributes with diagnosis errors

The on‐line quality monitoring procedure for attributes proposed by Taguchi, Elsayed and Hsiang for processes in which the fraction defective shifts from 0 at some point are examined under the assumption of diagnosis errors. The renewal reward (economic) approach of Nayebpour and Woodall is used to develop a mathematical expression for the long‐run expected cost per item produced and assessment of the optimum inspection interval is discussed. Copyright © 2001 John Wiley & Sons, Ltd.     

Determination of pesticides in dried minor tropical fruits from Colombia using the Quick,Easy, Cheap,Effective, Rugged,and Safe method‐gas chromatography–tandem mass spectrometry

The AOAC 2007.1 quick, easy, cheap, effective, rugged, and safe official method, together with gas chromatography coupled to a triple quadrupole mass spectrometer was applied for the analysis of 38 multiclass pesticides from dried fruits typically cultivated and exported from Colombia: uchuva (Physalis peruviana), lulo (Solanum quitoense), guanabana (Anona muricata), and pitahaya (Hylocereus undatus). The whole method was validated in terms of matrix‐matched calibration, matrix effect, and recovery using atrazine‐d₅ as internal standard, triphenylphosphate for quality control of the injection, and a proper mixture of analytes protectants. Matrix‐matched calibration data were found satisfactory for all pesticides and dried fruits, reporting R² values above 0.99. Matrix effect values evidenced the existence of such effect in most cases. The applied procedure gave satisfactory recovery percentages (70–120%) and relative standard deviation values (< 20%) for 92% of the 456 combinations pesticide/fruit studied (spiked levels of 25, 200, and 400 µg/kg). Finally, 20 real dried fruit samples were analyzed and residues of tebuconazole were found in two samples of uchuva at a concentration below the lowest calibration level of the method for one of them and at 10.8 ± 1.6 µg/kg for the other, being below or similar to the general maximum residue level established for monitoring purposes in food applications.