Automated DBS Extraction Prior to Hilic/RP LC–MS/MS Target Screening of Drugs

This article describes a rapid LC–MS/MS target screening method based on an automated extraction of 5 μL dried blood spots (DBS), two 5 min chromatographic runs on orthogonal phase columns (RP and Hilic) and a data dependent acquisition (DDA) of product ions spectra for the reliable identification of the detected compounds. The extraction step was performed in 2 min by using the LC autosampler itself in 96-well plates. This procedure was evaluated using 22 model compounds frequently encountered in forensic investigations, i.e., cocaine, benzodiazepines, amphetamines, opioids, antidepressants and antipsychotics. These investigations showed that even if the extraction step was reduced to a minimum, the extraction recoveries were satisfactory (median value of 40 %) and allowed for the detection of the model compounds in their therapeutic ranges, with the exception of morphine. Moreover, the use of two different chromatographic columns broadened the number of screening targets to those that behaved poorly under RP conditions, such as amphetamines or glucuronides, while keeping chromatographic gradients very short. This procedure was applied to 34 authentic post-mortem cases. It allowed the detection of 89 % of the compounds that were quantified in the routine procedures and the formal identification of 77 % of the compounds using their product ions spectra. These results were considered more than satisfactory compared to routine screening alone (GC–MS and LC-DAD, 55 % compound identification). The method described in this article is therefore a powerful approach for a fast, reliable and efficient target screening of drugs in forensic and clinical investigations.     

Discrete filter operators for large‐eddy simulation using high‐order spectral difference methods

The combination of a high‐order unstructured spectral difference (SD) spatial discretization scheme with sub‐grid scale (SGS) modeling for large‐eddy simulation is investigated with particular focus on the consistent implementation of a structural mixed model based on the scale similarity hypothesis. The difficult task of deriving a consistent formulation for the discrete filter within the SD element of arbitrary order led to the development of a new class of three‐dimensional constrained discrete filters. The discrete filters satisfy a set of selected criteria and are completely local within the SD element. Their weights can be automatically computed at run time from the number of solution points within each element and the expected filter cutoff length scale. The novel discrete filters can be applied to any SGS model involving explicit filtering and to a broad class of high‐order discontinuous finite element numerical schemes. The code is applied to the computation of turbulent channel flows at three Reynolds numbers, namely Re_τ = 180, 395, and 590 (based on the friction velocity u_τ and channel half‐width δ). Results from computations with and without the SGS model are compared against results from direct numerical simulation. The numerical experiments suggest that the results are sensitive to the use of the SGS model, even when a high‐order numerical scheme is used, especially when the grid resolution is kept relatively low and mostly in terms of resolved Reynolds stresses. Results obtained using existing filters based on the projection of the solution over lower‐order polynomial bases are also shown and demonstrate that these filters are inadequate for SGS modeling purposes, mostly because of their inability to enforce the selected cutoff length scale with sufficient accuracy. The use of the similarity mixed formulation proved to be particularly accurate in reproducing SGS interactions, confirming that its well‐known potential can be realized in conjunction with state‐of‐the‐art high‐order numerical schemes.Copyright © 2012 John Wiley & Sons, Ltd.     

Two-Photon Absorption and Cell Imaging of Fluorene-Functionalized Epicocconone Analogues

Epicocconone 1 is a natural chromophore isolated from the fungus Epicoccum nigrum that has shown applications in proteomics and fluorescent microscopy thanks to its unique pro-fluorescence properties. The modification of the skeleton of the natural product by replacing the triene side chain by a fluorenyl scaffold can noticeably increase the fluorophore's absorption coefficient. The synthesis of the analogues of the natural product has been made possible by the use of a palladium-catalyzed carbonylation reaction, allowing the construction of the β-keto-dioxinone key intermediate. Two-photon absorption cross-section measurements of the fluorenyl epicocconone analogues show a structure dependency with values ranging from 60 to 280 GM and live cell imaging show intense staining of intracellular vesicle-like structures around the nucleus.     

Influence of the Metal Ion on the Two‐Photon Absorption Properties of Lanthanide Complexes Including Near‐IR Emitters

The synthesis of tris(2‐thenoyltrifluoroacetonate)lanthanide(III) complexes featuring a diethylaminostyryl‐2,2′‐bipyridine coligand was achieved for lanthanum; the near‐infrared (NIR) emitters neodymium, erbium, and ytterbium; and the transition‐metal yttrium. The photophysical properties were thoroughly studied, and it was demonstrated that the conjugated bipyridine ligand acts as a good antenna for the sensitization of the NIR emitters. The two‐photon absorption (TPA) properties of all five complexes were investigated by using both two‐photon excited fluorescence and the Z‐scan method. We demonstrate that the nature of the rare earth ion has almost no influence on the TPA properties centered on the conjugated bipyridyl ligand. Finally, we show that Yb^III is sensitized by a two‐photon antenna effect, and that Nd^III is mostly sensitized by a one‐photon process involving direct excitation of forbidden f–f transitions.     

A new DMAP-catalyzed and microwave-assisted approach for introducing heteroarylamino substituents at position-4 of the quinazoline ring

We report herein a new methodology for synthesizing quinazoline derivatives bearing a heteroarylamino moiety at position-4 of the quinazoline ring. As an alternative to the Buchwald–Hartwig cross-coupling reaction, which appears, until now, as the only efficient way to react 4-chloroquinazolines with numerous amino nitrogen-containing heterocycles displaying poor nucleophilicity, we developed a DMAP-catalyzed reaction involving microwave irradiation. Optimization of the reaction conditions led to the use of 30 mol % of DMAP in toluene, using a monomode microwave reactor and sealed vials. Moreover, the S_NAr reaction intermediate salt was isolated and fully characterized. Finally, the procedure was extended to two different 2-substituted-quinazoline series and also to various anilines, demonstrating that this approach was a general efficient way to access to such 4-substituted quinazoline scaffolds of high pharmaceutical interest.     

Biomimetic Mussel Adhesive Inspired Anchor to Design ZnO@Poly(3‐Hexylthiophene) Hybrid Core@Corona Nanoparticles

The functionalization of zinc oxide (ZnO) nanoparticles by poly(3‐hexylthiophene) (P3HT) brush is completed by the combination of a mussel inspired biomimetic anchoring group and Huisgen cyclo‐addition “click chemistry.” Herein, the direct coupling of an azide modified catechol derivative with an alkyne end‐functionalized P3HT is described. This macromolecular binding agent is used to access core@corona ZnO@P3HT with a stable and homogeneous conjugated organic corona. Preliminary photoluminescence measurement proves an efficient electron transfer from the donor P3HT to the acceptor ZnO nanoparticles upon grafting, thus demonstrating the potential of such a combination in organic electronics.

     

Programmable Polymer‐Based Supramolecular Temperature Sensor with a Memory Function

A new class of polymeric thermometers with a memory function is reported that is based on the supramolecular host–guest interactions of poly(N‐isopropylacrylamide) (PNIPAM) with side‐chain naphthalene guest moieties and the tetracationic macrocycle cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) as the host. This supramolecular thermometer exhibits a memory function for the thermal history of the solution, which arises from the large hysteresis of the thermoresponsive LCST phase transition (LCST=lower critical solution temperature). This hysteresis is based on the formation of a metastable soluble state that consists of the PNIPAM–CBPQT⁴⁺ host–guest complex. When heated above the transition temperature, the polymer collapses, and the host–guest interactions are disrupted, making the polymer more hydrophobic and less soluble in water. Aside from providing fundamental insights into the kinetic control of supramolecular assemblies, the developed thermometer with a memory function might find use in applications spanning the physical and biological sciences.     

Enhancement of mass spectrometric detection of LTC4, LTD4, and LTE4 by derivatization

Several acylating reagents are synthesized and used to introduce quatemary phosphonium or ammonium or ternary sulfonium functions into a simple model of a peptido leukotriene (PLT). One of these reagents was selected for further study with LTE₄, LTD₄, and LTC₄. We demonstrate that acylation of the free amine function of PLTs to produce the 5-triphenylphosphoniumvaleryl-amide (TPPV) derivatives enhances chemical stabilities and significantly increases responses in fast-atom bombardment and continuous-flow liquid secondary ion mass spectrometry (CF-LSIMS) relative to the native PLTs. With high-performance liquid chromatography inlet to CF-LSIMS, we demonstrate the facile detection in selected ion monitoring of the TPPV derivative of 3 pg of LTD₄.     

Closed-System Solution of the 1D Atom from Collision Model

Obtaining the total wavefunction evolution of interacting quantum systems provides access to important properties, such as entanglement, shedding light on fundamental aspects, e.g., quantum energetics and thermodynamics, and guiding towards possible application in the fields of quantum computation and communication. We consider a two-level atom (qubit) coupled to the continuum of travelling modes of a field confined in a one-dimensional chiral waveguide. Originally, we treated the light-matter ensemble as a closed, isolated system. We solve its dynamics using a collision model where individual temporal modes of the field locally interact with the qubit in a sequential fashion. This approach allows us to obtain the total wavefunction of the qubit-field system, at any time, when the field starts in a coherent or a single-photon state. Our method is general and can be applied to other initial field states.