Synthesis and characterization of electrically conducting polyaniline–TCNE complexes

Polyaniline–tetracyanoethylene (TCNE) complexes can be synthesized either from emeraldine base or emeraldine hydrochloride by a relatively simple method. The complexes demonstrate greater stability than the emeraldine hydrochloride at elevated temperatures and under high current densities. The electrical conductivity of the complexes synthesized from emeraldine base can be varied from < 10^?6 to 0.2 S/cm by varying the amount of TCNE incorporated. The complexes synthesized from emeraldine hydrochloride are slightly more conductive than the starting emeraldine hydrochloride. In both types of complexes, it appears that electron transfer between the polyaniline and TCNE has occurred resulting in the formation of some positively charged polyaniline nitrogen and TCNE anions.     

The synthesis and XPS characterization of iodine containing plasma polymers

Plasma polymers derived from iodobenzene and four copolymers with benzene of varying monomer ratios have been synthesized. Samples were analyzed for qualitative and quantitative information using x-ray photoelectron spectroscopy. The optimum conditions whereby a higher iodine content is obtained in the plasma polymer have been achieved. The results indicate that the use of a copolymerization approach is better. These plasma polymers were subsequently exposed to an oxygen plasma and it was found that oxidation and etching of the surfaces of the plasma polymers does occur. The extent of iodine loss via oxygen plasma etching appears dependent on the character of the plasma polymer.     

Protein-Protein Interactions: Insight from Molecular Dynamics Simulations and Nanoparticle Tracking Analysis

Protein-protein interaction plays an essential role in almost all cellular processes and biological functions. Coupling molecular dynamics (MD) simulations and nanoparticle tracking analysis (NTA) assay offered a simple, rapid, and direct approach in monitoring the protein-protein binding process and predicting the binding affinity. Our case study of designed ankyrin repeats proteins (DARPins)—AnkGAG1D4 and the single point mutated AnkGAG1D4-Y56A for HIV-1 capsid protein (CA) were investigated. As reported, AnkGAG1D4 bound with CA for inhibitory activity; however, it lost its inhibitory strength when tyrosine at residue 56 AnkGAG1D4, the most key residue was replaced by alanine (AnkGAG1D4-Y56A). Through NTA, the binding of DARPins and CA was measured by monitoring the increment of the hydrodynamic radius of the AnkGAG1D4-gold conjugated nanoparticles (AnkGAG1D4-GNP) and AnkGAG1D4-Y56A-GNP upon interaction with CA in buffer solution. The size of the AnkGAG1D4-GNP increased when it interacted with CA but not AnkGAG1D4-Y56A-GNP. In addition, a much higher binding free energy (∆GB) of AnkGAG1D4-Y56A (−31 kcal/mol) obtained from MD further suggested affinity for CA completely reduced compared to AnkGAG1D4 (−60 kcal/mol). The possible mechanism of the protein-protein binding was explored in detail by decomposing the binding free energy for crucial residues identification and hydrogen bond analysis.     

Nonlinear optical characterization of phosphate glasses based on ZnO using the Z-scan technique

The nonlinear optical properties of a phosphate vitreous system [(ZnO)_x-(MgO)_30-x-(P₂ O₅)₇₀], where x=8, 10, 15, 18, and 20 mol% synthesized through the melt-quenching technique have been investigated by using the Z-scan technique. In the experiment, a continuous-wave laser with a wavelength of 405 nm was utilized to determine the sign and value of the nonlinear refractive (NLR) index and the absorption coefficient with closed and opened apertures of the Z-scan setup. The NLR index was found to increase with the ZnO concentration in the glass samples by an order of 10^-10 cm²·W^-1. The real and imaginary parts of the third-order nonlinear susceptibility were calculated by referring to the NLR index (n₂) and absorption coefficient (β) of the samples. The value of the third-order nonlinear susceptibility was presented by nonlinear refractive or absorptive behavior of phosphate glasses for proper utilization in nonlinear optical devices. Based on the measurement, the positive sign of the NLR index shows a self-focusing phenomenon. The figures of merit for each sample were calculated to judge the potential of phosphate glasses for application in optical switching.     

Effect of vertical stacking dies on flow behavior of epoxy molding compound during encapsulation of stacked-chip scale packages

This paper presents three dimensional (3D) simulation of flow visualization in the encapsulation of stacked-chip scales packages (S-CSP), using finite volume method. The S-CSP model is constructed using GAMBIT and simulated using FLUENT CFD software. The epoxy molding compound is Hitachi CEL-9200 XU (LF) and its flow is assumed laminar and incompressible. Cross viscosity model and volume of fluid technique are applied for flow front tracking of the encapsulant. The meshing is performed using tetrahedral elements and the discretization is done by first order upwind scheme. SIMPLE algorithm is selected for solving the governing equations. The top view and 3D view of simulation flow front profiles in the encapsulation process are presented. The percentage of filled volume versus filling time, viscosity versus shear rate and number of voids versus rows of stacked die are plotted. The temperature and pressure distributions within the mold cavity during the encapsulation process are also observed. Further, the possibility and cause of void formation during the encapsulation process are analyzed and discussed in detail. The number of vertical stacking dies and horizontal rows of packages are found to be crucial in the void formation. The numerical results are compared with previous experimental results and found in good conformity.     

Chemical Composition,Antioxidant and Cytoprotective Potentials of Carica papaya Leaf Extracts: A Comparison of Supercritical Fluid and Conventional Extraction Methods

The leaves of Carica papaya (CP) are rich in natural antioxidants. Carica papaya has traditionally been used to treat various ailments, including skin diseases. This study aims to decipher the antioxidant effects and phytochemical content of different CP leaf extracts (CPEs) obtained using supercritical carbon dioxide (scCO₂) and conventional extraction methods. The antioxidant activities of CPEs were evaluated by cell-free (1,1-diphenyl-2-picryl-hydrazyl (DPPH) and ferric-reduced antioxidative power (FRAP)) and cell-based (H₂O₂) assay. Both C. papaya leaf scCO₂ extract with 5% ethanol (CPSCE) and C. papaya leaf scCO₂ extract (CPSC) exhibited stronger DPPH radical scavenging activity than conventional extracts. In the FRAP assay, two hydrophilic extracts (C. papaya leaf ethanol extract (CPEE) and C. papaya freeze-dried leaf juice (CPFD)) showed relatively stronger reducing power compared to lipophilic extracts. Cell-based assays showed that CPFD significantly protected skin fibroblasts from H₂O₂-induced oxidative stress in both pre-and post-treatment. CPEE protected skin fibroblasts from oxidative stress in a dose-dependent manner while CPSCE significantly triggered the fibroblast recovery after treatment with H₂O₂. GC-MS analysis indicated that CPSCE had the highest α-tocopherol and squalene contents. By contrast, both CP hydrophilic extracts (CPEE and CPFD) had a higher total phenolic content (TPC) and rutin content than the lipophilic extracts. Overall, CPEs extracted using green and conventional extraction methods showed antioxidative potential in both cell-based and cell-free assays due to their lipophilic and hydrophilic antioxidants, respectively.     

An Electrochemical Immunobiosensor for Direct Detection of Veterinary Drug Residues in Undiluted Complex Matrices

An electrochemical immunobiosensor is developed that allows the detection of small molecules, such as drugs, in undiluted complex samples, with no washing or rinsing steps via a displacement assay. This is achieved using an interface comprised of a mixed layer of oligo(phenylethynylene) molecular wire (MW), to allow electrochemical communication, and oligo(ethylene glycol) (OEG) to control the interaction of proteins and electroactive interferences with the electrode surface. The mixed layer is formed from in situ‐generated aryl diazonium cations. To the distal end of the MW, a redox probe 1,1′‐di(aminomethyl)ferrocene (FDMA) is attached followed by an epitope (the structural feature the antibody selectively recognizes) to which an antibody would bind. Association or dissociation of the antibody with the sensing interface causes a modulation of the ferrocene electrochemistry. Antibody complexed electrodes are exposed to samples containing spiked enrofloxacin (unbound target analyte), in milk and environmental water and interrogated using square wave voltammetry (SWV). The lowest detected concentration of free enrofloxacin was 10 pg mL^?1 in phosphate buffer, 50 mM, pH 7. For free enrofloxacin detection in undiluted complex matrices, by adding disodium EDTA (50 mM), the recovery obtained was 94.1 % in skim milk and 88.5 % in stream water, respectively as compared to clean phosphate buffer. The immunobiosensor response time was 10–15 minutes. The sensor performance in milk was shown to be superior to a standard method based on Liquid Chromatography Mass Spectroscopy (LC‐MS/MS).     

Development and validation of an LC-MS-MS method for the simultaneous determination of sulforaphane and its metabolites in rat plasma and its application in pharmacokinetic studies

A highly sensitive and simple high-performance liquid chromatographic-tandem mass spectrometric (LC-MS-MS) assay is developed and validated for the quantification of sulforaphane and its metabolites in rat plasma. Sulforaphane (SFN) and its metabolites, sulforaphane glutathione (SFN-GSH) and sulforaphane N-acetyl cysteine (SFN-NAC) conjugates, are extracted from rat plasma by methanol-formic acid (100:0.1, v/v) and analyzed using a reversed-phase gradient elution on a Develosil 3 μm RP-Aqueous C(30) 140? column. A 15-min linear gradient with acetonitrile-water (5:95, v/v), containing 10 mM ammonium acetate and 0.2% formic acid, as mobile phase A, and acetonitrile-water (95:5, v/v), containing 10 mM ammonium acetate and 0.2% formic acid as mobile phase B, is used. Sulforaphane and its metabolites are well separated. Sulforaphene is used as the internal standard. The lower limits of quantification are 1 ng/mL for SFN and 10 ng/mL for both SFN-NAC and SFN-GSH. The calibration curves are linear over the concentration range of 25-20,000 ng/mL of plasma for each analyte. This novel LC-MS-MS method shows satisfactory accuracy and precision and is sufficiently sensitive for the performance of pharmacokinetic studies in rats.     

Apparent solubility of hydroxyapatite in aqueous medium and its influence on the morphology of nanocrystallites with precipitation temperature

Two differing wet-chemical synthesis routes, Ca(OH)2 + H3PO4 and CaCl2 + Na3PO4/NaOH, were used to prepare hydroxyapatite (HA) at various temperatures ranging from 30 to 95 degrees C. The electrical conductivity of the solution was measured at regular intervals of time during H3PO4 and Na3PO4 addition to the suspension/solution containing Ca2+ ions. The rate of change of conductivity is used to note the end point of the reaction. X-ray diffraction of the dried, precipitated particles revealed HA as the predominant phase, and the FTIR spectroscopy studies indicated the presence of CO3(2-) groups which substituted PO4(3-) groups in the HA lattice (B-type). FESEM observations revealed that the aspect ratio of the particles decreased with increasing precipitation reaction temperature in one system [Ca(OH)2 + H3PO4] and in the other system it increased with increasing temperature. The changes in the morphology with temperature were analyzed through conductivity measurements and the thermochemical properties of the reaction systems. Conductivity measurements showed that the concentration of dissolved ions at the end point of the reaction between Ca(OH)2 and H3PO4 increased, indicating an increased apparent solubility of HA with increasing temperature, whereas the end-point conductivity did not increase noticeably in the other reaction system.     

Features of the scattering of focused terahertz radiation from the probe of a terahertz near-field microscope

The scattering of pulsed terahertz radiation from metallic probes in the form of thin cylinders and cones with a small opening angle, which are used in apertureless terahertz near-field microscopes, has been investigated. The extrema of the waveform of pulsed terahertz radiation scattered from a free probe are linearly shifted with a change in the vertical position of the probe, and the spectral distribution is characterized by an inversely proportional frequency dependence. In the presence of a reflecting surface under the probe, when new excitation and detection directions appear, the spectrum of scattered terahertz radiation does not differ from the spectrum of the incident radiation. The experimental data are in mutual agreement with the theoretical results obtained within the model of the generation of diffraction edge waves at the interface of inhomogeneous excitation between the excitation region and shadow region.