A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

High-pressure heat capacity of chromiumnear the néel line

An a.c. calorimetric technique has been developed for high-pressure work and used for the study of chromium near its Néel transition line. Heat capacity data were obtained as a function of pressure along four isotherms. At 37·51 and 34·95°C the C_p values showed lambda-like singularities at 490 and 890 bar, respectively. At 32·60°C there was a finite cusp in C_p at a transition pressure of 1060 bar. At 27·75°C there was, surprisingly, no indication of any heat capacity anomaly at an expected transition pressure of ～2900 bar.     

harmonic approximation on closed sets

In this paper the harmonic approximation ( ) on relatively closed subsets of a domain in the complex plane is characterized under the same conditions given by S. Gardiner for the uniform case. Thus, the result of P. Paramonov on harmonic polynomial approximation for compact subsets is extended to closed sets. Moreover, the problem of uniform approximation with continuous extension to the boundary for harmonic functions and similar questions in harmonic approximation are also studied.

     

Investigation of thermal decomposition reactions by means of thermal analysis and dielectric constant measurement

Dielectric constant measurements as a function of temperature and thermal analysis were performed in copper sulphate pentahydrate and sodium nitrite to study the nature of the decomposition reactions. The application of these combined techniques to the study of several possible mechanisms of thermal decomposition is advanced.     

Preparation of glycopolymer‐coated magnetite nanoparticles for hyperthermia treatment

In this article, magnetite nanoparticles (MNPs) coated with glycopolymer bearing glucose moieties were designed with optimal structural, colloidal, and magnetic properties for biomedical applications. MNPs with an average size of 17 ± 2 nm were synthesized by thermal decomposition process and then their surfaces were modified with active vinyl groups. Two different monomers were immobilized onto the surfaces: dopamine methacrylamide, a monomer with properties inspired on mussels adhesive capacity, or unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]‐oxy}ethyl methacrylate. Afterward, the glycomonomer were polymerized at the interface of both vinyl functionalized MNPs by conventional radical polymerization. The resultant hybrid NPs were water dispersible presenting good stability in aqueous solution for long time periods. Moreover, the high density of carbohydrates at the surface of the magnetic NPs could confer targeting properties to the system as demonstrated by studies of their binding interactions with lectins, where the binding activity is higher as the glycopolymer content augments. The magnetic and magneto‐thermal properties of the synthesized hybrid NPs were evaluated. The magnetization curves reveal superparamagnetic features at 300 K, with high values of saturation magnetization. Furthermore, the hybrid glycoparticles show suitable heat dissipation power when exposed to alternating magnetic field conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation,antimicrobial activity,and toxicity of 2‐amino‐4‐arylthiazole derivatives

Seven 2‐amino‐4‐aryl‐1,3‐thiazoles ( 1a–g ) and their corresponding 2‐aminoacetyl ( 2a–g ) and 2‐aminoacetyl‐5‐bromo ( 3a–g ) derivatives were synthesized and tested in vitro against 11 reference strains, three Gram‐positive and four Gram‐negative bacteria, two yeasts, and two moulds. Toxicity of the compounds was also evaluated using the brine shrimp test. Compounds 1a, 1b, 1e–g , and 3b showed moderate antimicrobial activity at different concentrations. The results indicated that acetylation of the amino group and bromination at position 5 of the thiazole moiety cause lost of activity. Compounds 1a, 1e , and 1f showed toxicity to brine shrimp nauplii below 10 ppm. Most other compounds showed moderate toxicity, LD₅₀ above 100 ppm. Structures of all compounds were confirmed by NMR and MS data. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:254–260, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20182     

On the Nitroxide Quasi‐Equilibrium in the Alkoxyamine‐Mediated Radical Polymerization of Styrene

Summary: The range of validity of two popular versions of the nitroxide quasi‐equilibrium (NQE) approximation used in the theory of kinetics of alkoxyamine mediated styrene polymerization, are systematically tested by simulation comparing the approximate and exact solutions of the equations describing the system. The validity of the different versions of the NQE approximation is analyzed in terms of the relative magnitude of (dN/dt)/(dP/dt). The approximation with a rigorous NQE, k_c[P][N] = k_d[P N], where P, N and P N are living, nitroxide radicals and dormant species respectively, with kinetic constants k_c and k_d, is found valid only for small values of the equilibrium constant K (10⁻¹¹–10⁻¹² mol · L⁻¹) and its validity is found to depend strongly of the value of K. On the other hand, the relaxed NQE approximation of Fischer and Fukuda, k_c[P][N] = k_d[P N]₀ was found to be remarkably good up to values of K around 10⁻⁸ mol · L⁻¹. This upper bound is numerically found to be 2–3 orders of magnitude smaller than the theoretical one given by Fischer. The relaxed NQE is a better one due to the fact that it never completely neglects dN/dt. It is found that the difference between these approximations lies essentially in the number of significant figures taken for the approximation; still this subtle difference results in dramatic changes in the predicted course of the reaction. Some results confirm previous findings, but a deeper understanding of the physico‐chemical phenomena and their mathematical representation and another viewpoint of the theory is offered. Additionally, experiments and simulations indicate that polymerization rate data alone are not reliable to estimate the value of K, as recently suggested.

Validity of the rigorous nitroxide quasi‐equilibrium assumption as a function of the nitroxide equilibrium constant.     

Determination of soluble toxic arsenic species in alga samples by microwave-assisted extraction and high performance liquid chromatography-hydride generation-inductively coupled plasma-atomic emission spectrometry

A microwave-based procedure for arsenic species extraction in alga samples (Sargassum fulvellum, Chlorella vulgaris, Hizikia fusiformis and Laminaria digitata) is described. Extraction time and temperature were tested in order to evaluate the extraction efficiency of the process. Arsenic compounds were extracted in 8 ml of deionised water at 90 degrees C for 5 min. The process was repeated three times. Soluble arsenic compounds extracted accounted for about 78-98% of total arsenic. The results were compared with those obtained in a previous work, where the extraction process was carried out by ultrasonic focussed probe for 30 s. Speciation studies were carried out by high performance liquid chromatography-hydride generation-inductively coupled plasma-atomic emission spectrometry (HPLC-HG-ICP-AES). The chromatographic method allowed us to separate As(III), As(V), monomethylarsonic acid and dimethylarsinic acid in less than 13 min. The chromatographic analysis of the samples allowed us to identify and quantify As(V) in Hizikia sample and Sargasso material, while the four arsenic species studied were found in Chlorella sample. In the case of Laminaria sample, none of these species was identified by HPLC-HG-ICP-AES. However, in the chromatographic analysis of this alga by HPLC-ICP-AES, an unknown arsenic species was detected.     

Flash DSC crystallization study for blown film grade bimodal HDPE resins. I. Isothermal kinetics and its application of the blown film modeling

Isothermal ultra‐cooling crystallization tests were conducted on three blown film grade bimodal HDPE resins using an ultrafast scanning calorimeter, the Flash DSC. Isothermal tests were performed to study the regime transition, the thermal nucleation and the spherulitical growth using the Hoffman‐Lauritzen theory in a range between 90 °C and 116 °C. Temperature profile estimations using such data were in good agreement with actual blown film process data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2425–2431