基于光谱技术的杨梅汁品种快速鉴别方法的研究

为了实现杨梅汁品种的快速无损鉴别,提出了一种用可见和近红外光谱技术快速鉴别杨梅汁品种的新方法。首先采用偏最小二乘法进行模式特征分析,经过交互验证法判别,确定最佳主成分数为9。完成特征提取后,将这9个主成分作为神经网络的输入变量,建立了三层BP神经网络,实现类别预测的同时也完成了数学建模与优化分析工作。3个品种的杨梅汁样本数均为20,共计60个样本。在神经网络学习中,将其分成训练集样本51个和预测集样本9个。对9个未知样本进行预测,准确率为100％。说明本文提出的基于光谱技术和模式识别的方法具有很好的分类和鉴别能力。     

二氧化氯氧化云杉木质素的光谱研究

采用傅里叶变换红外光谱(FTIR)、紫外-可见光谱(UV-visible)、傅里叶变换拉曼光谱(FT-Raman)以及核磁共振(1H NMR)分析技术对云杉木质素被二氧化氯氧化前后的结构变化进行了研究。当木质素被二氧化氯氧化时,其骨架结构中的芳香环基团被有效地氧化开环。红外光谱显示木质素中的愈疮木基特征峰强度显著降低,紫丁香基苯基以及对羟基苯基特征吸收峰完全消失,在被氧化后的木质素中出现CO 共轭羰基伸缩振动特征峰。紫外光谱显示木质素在被氧化后位于280 nm处的紫外吸收显著降低。1H核磁共振波谱显示,木质素中连接在芳香环侧链的甲氧基数量被氧化后出现显著的降低,同时与苯环相连的脂肪族侧链在后也相应地减少。研究结果说明二氧化氯能有效地氧化木质素中的芳香环,并将其氧化为带有CO基因的粘康酸及其酯类物质或带有醌型基团的物质。     

油菜叶片的光谱特征与叶绿素含量之间的关系研究

叶绿素是作物生长中的重要因素,是植物营养胁迫、光合作用能力和生长状况的良好指示剂。实时、可靠的作物营养诊断是进行科学施肥管理的基础,也是实践精细农业的关键技术之一。采用便携式可见-近红外光谱仪,在室外自然光照条件下对不同氮肥水平下油菜叶片的光谱特性进行了研究,并根据作物特有的光谱特征,采用逐步回归分析方法建立了油菜叶片的叶绿素含量与红边位置和绿峰位置之间的定量分析模型。结果表明,将红边位置、绿峰位置二者作为自变量时,建立的模型效果优于采用单一的红边位置为自变量时建立的模型效果。其相关系数分别为0.863和0.848;校正标准偏差SEC分别为5.273和5.459, 说明采用红边位置和绿峰位置这两个参数更能很好地预测叶片的叶绿素含量。     

Modification of Nuclear Decay Constant in the Finite Space

Hyperfine Interactions - The decay constants of nuclei are calculated based on the Cheon's idea, namely, the population of nuclear excited state can be modified by the mechanism that the...     

Remote multiplexing of holograms with random patterns from multimode fiber bundles

We propose the remote multiplexing of holograms with random patterns from a multimode fiber bundle used as the reference beams. The random pattern reference beam is characterized by the superposition and concatenation of propagation modes of multimode fiber and free space. For angle, shift, and wavelength remote multiplexing we compare two methods of laser coupling to the fiber bundle, i.e., direct coupling and lens coupling. A theoretical discussion that uses mode orthogonality is provided to describe multiplexing characteristics, and the theory is verified by experimental results. These remote-multiplexing methods can be applied to general multimode waveguide arrays for construction of compact and integrated optical systems in which multiplexing can be controlled remotely.     

常压化学气相沉积技术生长ZnO:H薄膜的光学性质

采用常压金属有机物化学气相沉积技术(AP-MOCVD),以二乙基锌(DEZn)为Zn源,去离子水(H2O)为氧源,N2作载气,在外延ZnO薄膜的反应气氛中通入少量氢气,在c-Al2O3衬底上生长出了ZnO∶H薄膜。用X射线双晶衍射和光致发光谱对ZnO∶H薄膜的结晶性能和光学性质进行表征。结果表明,ZnO∶H薄膜(002)和(102)面的Ω扫描半峰全宽分别为46.1 mrad和81.4 mrad,表明该薄膜具有良好的结晶性能;室温下,ZnO∶H薄膜具有较强的紫外光发射(380 nm),在低温10 K光致发光谱中观测到位于3.3630 eV处与氢相关的中性施主束缚激子峰(I4)及其位于3.331 eV处的双电子卫星峰(TES)。采用退火的方法,通过观测I4峰的强度变化,研究了氢在ZnO∶H薄膜中的热稳定性。发现随着退火温度的升高,I4峰的强度逐渐减弱,表明在高温下退火,氢会从ZnO薄膜中逸出。     

Consistency in formulation of spin current and torque associated with a variance of angular momentum

Based on the Noether's theorem, we develop systematically and rigorously the spin-dependent formulation of the conservation laws. The effect of the electronic polarization due to the spin-orbit coupling is included in the Maxwell equations. The polarization is related to the antisymmetric components of spin current, and it provides a possibility to measure the spin current directly. The variances of spin and orbit angular momentum currents imply a torque on the "electric dipole" associated with the moving electron. The dependencies of the torque on the polarization and the force on the motions of spin-polarized electrons in a two-dimensional electron gas with the Rashba spin-orbit coupling are discussed.     

Design of a widely tunable laser with a chirped ladder filter

We theoretically investigated a digitally tunable laser with a chirped ladder filter and a ring resonator to obtain a wide wavelength tuning range covering the whole C- or L- band. The clear relation between the tuning range and laser structure, especially the ladder filter, is described analytically. The introduction of a chirped structure into a ladder filter is effective in achieving both wide tunability and a stable lasing mode. A numerical simulation based on multimode rate equations shows that a tuning range of over 40 nm and a mode suppression ratio over 40 dB can be achieved by introducing a chirped ladder filter.     

绝对编码光栅的相位细分及其在位移测量中的应用

提出通过光栅条纹相位的精密测量,获取光栅高精度位移信息的方法。具体方法是对光栅图像采用多码道设计,用CCD二维图像传感器获取测量段光栅图像多码道信息。对最低码道图形的周期函数序列进行傅里叶变换、基频滤波和逆傅里叶变换获得光栅截断相位分布,其余码道信息提供相位展开的级次,以此获得测量段光栅的绝对相位分布。用光刻的手段制作了实用的绝对编码光栅,基元码道的尺寸是:27.36μm用于明条纹,27.36μm用于暗条纹,最小基元码道空间周期为54.72μm,光栅长度为14008.32μm。在步长近似3μm的位移测试中,与比对的标准仪器记录值比较,标准偏差为0.2057μm,精度在亚微米量级。重复性实验表明,位置测试的稳定性为0.09μm(标准差),得到600倍以上细分的分辨力。     

Nb芯增强MgB2多芯超导线材的制备及性能研究

以Nb/Cu复合管作为外包套材料,Nb棒作为中心增强体,通过原位法粉末装管工艺(in-situ PIT)制备了不同芯丝结构的TiC 粉末掺杂MgB2/NbCu多芯线材.在高纯流动氩气保护条件下、700℃烧结2h进行成相反应.对烧结后的线材分别进行了应力-应变分析、微观结构以及超导电性等分析检测.拉伸实验分析表明,Nb芯...