Importance of supersuperexchange interactions in determining the dimensionality of magnetic properties. Determination of strongly interacting spin exchange paths in A(2)Cu(PO(4))(2) (A = Ba, Sr), ACuP(2)O(7) (Ba, Ca, Sr, Pb), CaCuGe(2)O(6), and Cu(2)UO(2)(PO(4))(2) on the basis of qualitative spin dimer analysis

The patterns of the Cu(2+) ion arrangements in the magnetic oxides A(2)Cu(PO(4))(2) (A = Ba, Sr), ACuP(2)O(7) (Ba, Ca, Sr, Pb), CaCuGe(2)O(6), and Cu(2)UO(2)(PO(4))(2) are quite different from the patterns of the strongly interacting spin exchange paths deduced from their magnetic properties. This apparently puzzling observation was explained by evaluating the strengths of the Cu-O-Cu superexchange and Cu-O...O-Cu supersuperexchange interactions of these oxides on the basis of qualitative spin dimer analysis. Supersuperexchange interactions are found to be crucial in determining the dimensionality of magnetic properties of these magnetic oxides.     

Investigation of the crystal structure and the structural and magnetic properties of SrCu2(PO4)2

SrCu2(PO4)2 was prepared by the solid-state method at 1153 K. Its structure was solved by direct methods in the space group Pccn (No. 56) with Z = 8 from synchrotron X-ray powder diffraction data measured at room temperature. Structure parameters were then refined by the Rietveld method to obtain the lattice parameters, a = 7.94217(8) A, b = 15.36918(14) A, and c = 10.37036(10) A. SrCu2(PO4)2 presents a new structure type and is built up from Sr2O16 and Cu1Cu2O8 units with Cu1...Cu2 = 3.256 A. The magnetic properties of SrCu2(PO4)2 were investigated by magnetic susceptibility, magnetization up to 65 T, Cu nuclear quadrupole resonance (NQR), electron-spin resonance, and specific heat measurements. With spin-dimer analysis, it was shown that the two strongest spin-exchange interactions between Cu sites result from the Cu1-O...O-Cu2 and Cu2-O...O-Cu2 super-superexchange paths with Cu1...Cu2 = 5.861 A and Cu2...Cu2 = 5.251 A, and the superexchange associated with the structural dimer Cu1Cu2O8 is negligible. The magnetic susceptibility data were analyzed in terms of a linear four-spin cluster model, Cu1-Cu2-Cu2-Cu1 with -2J(1)/kB = 82.4 K for Cu1-Cu2 and -2J(2)/k(B) = 59 K for Cu2-Cu2. A spin gap deduced from this model (Delta/kB = 63 K) is in agreement with that obtained from the Cu NQR data (Delta/kB = 65 K). A one-half magnetization plateau was observed between approximately 50 and 63 T at 1.3 K. Specific heat data show that SrCu2(PO4)2 does not undergo a long-range magnetic ordering down to 0.45 K. SrCu2(PO4)2 melts incongruently at 1189 K. We also report its vibrational properties studied with Raman spectroscopy.     

Comparison of Fatty Acid Contents and MMP-1 Inhibitory Effects of the Two Antarctic Fish,Notothenia rossii and Champsocephalus gunnari

Total fatty-acid (FA) contents of different organs (stomach, liver, brain, and skin) of two Antarctic fish, marbled rockcod (Notothenia rossii) and mackerel icefish (Champsocephalus gunnari), were examined using gas chromatography–mass spectrometry (GC–MS). N. rossii possessed higher contents of total omega-3, where eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), the most represented omega-3 FAs, were distributed throughout all parts of the fish. The highest level of EPA was observed in the skin and that of DHA was observed in the brain of N. rossii. C. gunnari showed organ peculiarity in that most of the omega-3 FAs were found in stomach and skin. Specifically, the highest levels of EPA and DHA were both observed in the stomach. Although N. rossii and C. gunnari both inhabit the Antarctic Southern Oceans, their characteristics in terms of the composition of fatty acids were shown to vary. The extracts were also evaluated for matrix metalloproteinase-1 (MMP-1)-inhibitory activities in UVB-induced human dermal fibroblasts, where extracts of the skin and liver of N. rossii showed the most significant inhibition upon MMP-1 production. These findings provide experimental evidence that the extracts of the Antarctic fish could be utilized as bioactive nutrients, particularly in the enhancement of skin health.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of a Zn-salen resorcinarene-based cavitand and its fluorescence response to nitro compounds

The synthesis, spectroscopic characterisation, conformational switching and fluorescence quenching efficiency of a resorcinarene-based cavitand containing Zn-salen (Zn-Cav) are reported. Synthesis of Zn-Cav was accomplished by the condensation of a quinoxaline derivatised with Zn-salen and a resorcinarene-based cavitand containing three quinoxalines. ¹H NMR spectroscopy confirmed that in DMSO, chloroform and acetone Zn-Cav resides in the vase conformation. The molecular geometry of Zn-Cav selectively changes from vase to kite under acidic conditions. Detection by fluorescence quenching of nitro-containing molecules, such as 4-nitrotoluene, 2,4-dinitrotoluene and 2,3-dimethyl-2,3-dinitrobutane was explored by spectrofluorimetry. It was found that the fluorescence of Zn-Cav is efficiently quenched by nitroaromatic compounds.     

Thermal conductivity behavior of SiC–Nylon 6,6 and hBN–Nylon 6,6 composites

A study was performed to determine the effect of the content and orientation of fillers on the thermal conductivity of a polymeric composite packed with hexagonal boron nitride (hBN) and silicon carbide (SiC) fillers. The thermal conductivity behavior of SiC–Nylon 6,6 and hBN–Nylon 6,6 composites was more dependent on the orientation and shape of the filler than on its thermal conductivity. The thermal conductivity of SiC–Nylon 6,6 composites with 59 % (v/v) isotropic SiC fillers increased from 0.25 to 3.83 W/m K. That of hBN–Nylon 6,6 composites with 62 % (v/v) anisotropic hBN fillers increased from 0.25 to 2.16 W/m K in the perpendicular direction whereas in the parallel direction it increased rapidly to 8.55 W/m K .     

Highly Conducting and Flexible Radical Crystals

Together with high conductivity, high flexibility is an important property required for next generation organic electronic components. Both properties are difficult to achieve together especially when the components are crystalline because of the intrinsic high brittleness of organic molecular crystals. We report an organic radical crystal system that has both high flexibility and high conductivity. The crystal consists of 9,10‐bis(phenylethynyl)anthracene radical cation ( BPEA^.+ ) units, and shows flexibility under pressure with high conductivity in ambient condition exhibiting average conductivity of 2.68 S cm^?1 when normal linear shape, as well as 2.43 S cm^?1 when bent. The structural analysis reveals that both a short π–π distance (3.290 Å) between BPEA^.+ units that are aligned along the crystal length direction, and the presence of PF₆^? counter ions induce flexibility and high electrical conductivity.     

One-step polymerization of polytrithiocarbonate using phase-transfer catalyst

A series of aliphatic and aromatic polytrithiocarbonates was prepared using a novel “one-pot” synthesis procedure employing a phase-transfer catalyst. The starting reagents were either an aliphatic or an aromatic dihalide and an excessive amount of carbon disulfide. The effects of the phase-transfer catalyst and reaction conditions on yield were studied. The structure and composition of the polymers and reaction side-products were determined from infrared, ultraviolet, ¹H-NMR spectra, and elemental analyses. The polymers were further characterized by viscosity measurement and thermal analysis. © 1993 John Wiley & Sons, Inc.     

Synthesis of Functionalized Tetrahydropyridines by SnCl4-Mediated [4+2] Cycloaddition between Donor–Acceptor Cyclobutanes and Nitriles

Cycloadditions of strained carbocycles promoted by Lewis acids are powerful methods to construct heterocyclic frameworks. In fact, the formal [3+2] cycloadditions of donor–acceptor (DA) cyclopropanes with nitriles has seen particular success in synthesis. In this work, we report on the first [4+2] cycloaddition of nitriles with DA cyclobutanes by Lewis acid activation. Tetrahydropyridine derivatives were obtained in up to 91 % yield from various aryl-activated cyclobutane diesters and aliphatic or aromatic nitriles.     

Positive Schatten(-Herz) Class Toeplitz Operators on the Half-space

On the harmonic Bergman space of the half-space, we give characterizations for an arbitrary positive Toeplitz operator to be a Schatten (or Schatten-Herz) class operator in terms of averaging functions and Berezin transforms. Examples are provided to show that various results are sharp. This research was supported by KOSEF(R01-2003-000-10243-0).