Simultaneous determination of colchicine and febuxostat in rat plasma: Application in a rat pharmacokinetic study

A selective, sensitive and rapid LC–MS/MS method has been developed and validated as per US Food and Drug Administration regulatory guidelines for the simultaneous quantitation of colchicine and febuxostat in rat plasma. Colchicine and febuxostat were extracted from the rat plasma using 10% tert-butyl methyl ether in ethyl acetate using colchicine-d₆ as an internal standard (IS). The chromatographic separation of colchicine, febuxostat and the IS was achieved using a mobile phase comprising 5 mm ammonium formate and 0.025% formic acid in acetonitrile (20:80, v/v) in isocratic mode on an Eclipse XDB-C₁₈ column. The injection volume and flow rate were 5.0 μl and 0.9 ml/min, respectively. Colchicine and febuxostat were detected by positive electrospray ionization in multiple reaction monitoring mode using transition pairs (Q1 → Q3) of m/z 400.10 → 358.10 and 317.05 → 261.00, respectively. The assay was linear in the ranges of 0.25–254 and 2.60–622 ng/ml for colchicine and febuxostat, respectively. The inter- and intra-day precision values were 0.58–13.0 and 1.03–4.88% for colchicine and febuxostat, respectively. No matrix or carryover effects were observed during the validation. Both analytes were stable on the bench-top, in the autosampler and in storage (freeze–thaw cycles and long-term storage at −80 ° C). A pharmacokinetic study in rats was performed to show the applicability of the validated method.     

Enantioselective LC–ESI–MS/MS method for quantitation of (−)-lumefantrine and (+)-lumefantrine in mice plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective, and reliable LC–MS/MS–ESI method for the direct quantitation of lumefantrine (LFN) enantiomers [(−)-LFN and (+)-LFN] in mice plasma as per regulatory guideline. LFN enantiomers and carbamazepine (internal standard) were extracted from mice plasma using Strata X SPE (solid-phase extraction) cartridges. Good resolution between enantiomers was achieved on a Chiralpak IA-3 column using an isocratic mobile phase (0.1% of diethyl amine in methanol), which was delivered at a flow rate of 0.8 mL/min. Detection and quantitation were performed using multiple reaction monitoring mode following the transitions m/z 530.27 → 512.30 and 237.00 → 194.00 for LFN enantiomers and the internal standard, respectively, in the positive-ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 2.39–895 ng/mL for each enantiomer. The intra- and inter-day precisions were in the range of 1.03–6.14 and 6.36–8.70 and 2.03–4.88 and 5.82–11.5 for (−)-LFN and (+)-LFN, respectively. Both (−)-LFN and (+)-LFN were found to be stable under different stability conditions. The method was successfully used to delineate stereoselective pharmacokinetics of LFN enantiomers in mice after an oral administration of rac-LFN (20 mg/kg). The pharmacokinetic results indicated that the disposition of LFN enantiomers was stereoselective in mice.     

A dried blood spot assay with HPLC–MS/MS for the determination of larotrectinib in mouse blood and its application to a pharmacokinetic study

Larotrectinib is a first-generation tropomyosin kinase inhibitor, approved for the treatment of solid tumors. In this paper, we present a validated dried blood spot (DBS) method for the quantitation of larotrectinib from mouse blood using HPLC–MS/MS, which was operated under multiple reaction monitoring mode. To the DBS disc cards, acidified methanol enriched with internal standard (IS; enasidenib) was added and extracted using tert-butyl methyl ether as an extraction solvent with sonication. Chromatographic separation of larotrectinib and the IS was achieved on an Atlantis dC₁₈ column using 10 mm ammonium formate–acetonitrile (30:70, v/v) delivered at a flow-rate of 0.80 ml/min. Under these optimized conditions, the retention times of larotrectinib and the IS were ~0.93 and 1.37 min, respectively. The total run time was 2.50 min. Larotrectinib and the IS were analyzed using positive ion scan mode and parent–daughter mass to charge ion (m/z) transitions of 429.1 → 342.1 and 474.1 → 267.1, respectively, were used for the quantitation. The calibration range was 1.06–5,080 ng/ml. No matrix effect or carryover was observed. Hematocrit did not influence DBS larotrectinib concentrations. All of the validation parameters met the acceptance criteria. The applicability of the validated method was shown in a mouse pharmacokinetic study.     

Efficient palladium-catalyzed C-S cross-coupling reaction of benzo-2,1,3-thiadiazole at C-5-position: A potential class of AChE inhibitors

Functionalization of 2,1,3-benzothiadiazole (BTD) with thiols at C-5 position remains low explored. Moreover, the arylthiol-substitutions at this position are also unexplored and can not be found by a S_N2 or S_N1 reaction. In this sense, herein we present a new palladium-catalyzed methodology for a wide variety of unpublished 5-arylsulfanyl-benzo-2,1,3-thiadiazole derivatives synthesis with moderate to high yields using a low catalytic loading of Pd(L-Pro)₂ as low-coast, and efficient catalyst in low reaction time. Besides, we concluded that the pKa of thiol species has an important role in this catalysis, mainly in the CMD like catalytic cyclo process, which strongly interferes in the reaction yields. Furthermore, arylsulfanyl-benzo-2,1,3-thiadiazoles derivatives have been assessed (in vitro) as potential acetylcholinesterase inhibitors.     

Leading-edge flow criticality as a governing factor in leading-edge vortex initiation in unsteady airfoil flows

A leading-edge suction parameter (LESP) that is derived from potential flow theory as a measure of suction at the airfoil leading edge is used to study initiation of leading-edge vortex (LEV) formation in this article. The LESP hypothesis is presented, which states that LEV formation in unsteady flows for specified airfoil shape and Reynolds number occurs at a critical constant value of LESP, regardless of motion kinematics. This hypothesis is tested and validated against a large set of data from CFD and experimental studies of flows with LEV formation. The hypothesis is seen to hold except in cases with slow-rate kinematics which evince significant trailing-edge separation (which refers here to separation leading to reversed flow on the aft portion of the upper surface), thereby establishing the envelope of validity. The implication is that the critical LESP value for an airfoil–Reynolds number combination may be calibrated using CFD or experiment for just one motion and then employed to predict LEV initiation for any other (fast-rate) motion. It is also shown that the LESP concept may be used in an inverse mode to generate motion kinematics that would either prevent LEV formation or trigger the same as per aerodynamic requirements.     

Magnetic nanoparticle‐tethered Schiff base–palladium(II): Highly active and reusable heterogeneous catalyst for Suzuki–Miyaura cross‐coupling and reduction of nitroarenes in aqueous medium at room temperature

As a continuation of our efforts to develop new heterogeneous nanomagnetic catalysts for greener reactions, we identified a Schiff base–palladium(II) complex anchored on magnetic nanoparticles (SB‐Pd@MNPs) as a highly active nanomagnetic catalyst for Suzuki–Miyaura cross‐coupling reactions between phenylboronic acid and aryl halides and for the reduction of nitroarenes using sodium borohydride in an aqueous medium at room temperature. The SB‐Pd@MNPs nanomagnetic catalyst shows notable advantages such as simplicity of operation, excellent yields, short reaction times, heterogeneous nature, easy magnetic work up and recyclability. Characterization of the synthesized SB‐Pd@MNPs nanomagnetic catalyst was performed with various physicochemical methods such as attenuated total reflectance infrared spectroscopy, UV–visible spectroscopy, inductively coupled plasma atomic emission spectroscopy, energy‐dispersive X‐ray spectroscopy, field‐emission scanning electron microscopy, transmission electron microscopy, powder X‐ray powder diffraction, thermogravimetric analysis and Brunauer–Emmett–Teller surface area analysis.     

Estimation of coefficient of variation in a weighted inverse Gaussian model

The coefficient of variation is an important parameter in many physical, biological and medical sciences. In this paper we study the estimation of the square of the coefficient of variation in a weighted inverse Gaussian model which is a mixture of the inverse Gaussian and the length biased inverse Gaussian distribution. This represents a rich family of distributions for different values of the mixing parameter and can be used for modelling various life testing situations. The maximum likelihood as well as the Bayes estimates of the parameters are obtained. These estimates are used to derive the estimates of the square of the coefficient of variation of the model under study. Several important data sets are analysed to illustrate the results. © 1996 John Wiley & Sons, Ltd.     

Magnetic and Raman scattering studies of Co-doped ZnO thin films grown by pulsed laser deposition

Phase pure Zn_1?x Co _x O thin films grown by pulsed laser deposition have transmittance greater than 75 % in the visible region. Raman studies confirm the crystalline nature of Zn_1?x Co _x O thin films. Zn_0.95Co_0.05O thin films show room temperature ferromagnetism with saturation magnetization of 0.4μ _B /Co atom. The possible origin of paramagnetism at higher Co doping concentrations can be attributed to the increased nearest-neighbor antiferromagnetic interactions between Co²⁺ ions in ZnO matrix. XPS confirms the substitution of Co²⁺ ions into the ZnO host lattice.     

Studies on biodegradable polymer electrolyte rice starch (RS) complexed with lithium iodide

Biodegradable and natural rice starch (RS) polymer with lithium iodide salt (LiI) was used to prepare polymer electrolytes using solution cast technique. Polymer electrolyte films were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM). TGA and DSC thermograms demonstrate that decomposition temperature (T_dc) and glass transition temperature (T_g) for rice starch shift upon complexation with lithium iodide salt. Thermolysis studies using TGA show decomposition temperature decreases with the addition of lithium iodide salt. XRD patterns show increase in amorphous behavior with doping of lithium iodide salt. The morphology studies were observed using SEM in terms of smoothness and miscibility.