Elastic instability of the nano-structured state as an intrinsic probe to study the early formation stages of sol–gel derived (Pb<Subscript>1-x</Subscript>Ca<Subscript>x</Subscript>)TiO<Subscript>3</Subscript> thin films

A novel method to investigate the early formation stages of polycrystalline (Pb_1-xCa_x)TiO₃ (PCT) perovskite films by means of traditional Brillouin and micro-Brillouin spectroscopy (BS, mBS) is described in the present work. The films were prepared by chemical solution deposition (CSD) onto oxidized (100)Si substrates and treated at temperatures between 350–650 °C by rapid thermal processing (RTP). The elastic instability observed by Brillouin spectroscopy at the nano-structured state of the PCT films was used here to determine their crystallization temperatures. Coexistence of different nanocrystalline phases (e.g., pyrochlore, perovskite) in the films could also be detected by this technique. The reliability of these results is demonstrated by complementary information obtained by X-ray diffraction (XRD) and scanning force microscopy (SFM). The effects of the annealing temperature and of the Ca²⁺ content on the crystallization process of these films are also discussed. PACS 78.35.+c; 77.84.-s; 61.82.Rx     

Silicon etching in Cl2 environment

The ion-beam-assisted etching of silicon in Cl₂ environment is considered. The theoretically calculated dependences of silicon etching rate on the flux of Cl₂ molecules at different ion current densities are compared with experimentally measured. The composition of the adsorbed layer is determined. It is found that SiCl₂ molecules prevail in the adsorbed layer. The reciprocal of relative concentration of SiCl₂ molecules in the adsorbed layer linearly depends on the ion-to-neutral flux ratio.     

Practical aspects associated with location planning for maternal and perinatal assistance in Brazil

A study has been carried out aimed at reducing perinatal mortality in the municipality of Rio de Janeiro through a better distribution of health care facilities. The algorithmic aspects are detailed elsewhere and here the emphasis is on practical issues and difficulties encountered. A 3-level hierarchical model was developed. Both uncapacitated and capacitated versions are briefly described together with some results based on actual data. The project brought to light many contradictions between OR theory and practice in developing countries and, unfortunately, the models developed were not implemented by the municipality health authorities. Possible reasons for this outcome are analysed.     

Cauchy-Born Rule and the Stability of Crystalline Solids： Dynamic Problems

We study continuum and atomistic models for the elastodynamics of crystalline solids at zerotemperature.We establish sharp criterion for the regime of validity of the nonlinear elastic wave equationsderived from the well-known Cauchy-Born rule.     

Trace element concentrations from São Francisco River - PR analyzed with PIXE technique

Summary Kulcsszavak (angolul, ha nem azonos az elozovel)     

A new approach towards peptidosulfonamides: synthesis of potential inhibitors of bacterial peptidoglycan biosynthesis enzymes MurD and MurE

Peptidosulfonamides are an emerging group of peptidomimetics with a variety of applications in medicinal chemistry. We present a novel approach to the synthesis of peptidosulfonamides, and apply it to a series of new potential inhibitors of the bacterial peptidoglycan biosynthesis enzymes MurD and MurE. The synthesis was conducted via N-phthalimido β-aminoethanesulfonyl chlorides, which are new building blocks for the synthesis of peptidosulfonamides. In the most crucial step, sulfonic acids or their sodium salts were converted into the corresponding sulfonyl chlorides using an excess of either SOCl₂ or SOCl₂/DMF, and then coupled to the C-protected amino acid. None of the compounds significantly inhibited MurD, however, some inhibited MurE; one had an IC₅₀ below 200 μM, which constitutes a promising starting point for further development. Molecular modelling simulations were performed on two analogues to investigate the absence of inhibitory activity of the sulfonamide compounds on MurD.     

Mercury removal from aqueous solution and flue gas by adsorption on activated carbon fibres

The use of two activated carbon fibres, one laboratorial sample prepared from a commercial acrylic textile fibre and one commercial sample of Kynol^®, as prepared/received and modified by reaction with powdered sulfur and H₂S gas in order to increase the sulfur content were studied for the removal of mercury from aqueous solution and from flue gases from a fluidized bed combustor. The sulfur introduced ranged from 1 to 6 wt.% depending on the method used. The most important parameter for the mercury uptake is the type of sulfur introduced rather than the total amount and it was found that the H₂S treatment of ACF leads to samples with the highest mercury uptake, despite the lower sulfur amount introduced. The modified samples by both methods can remove HgCl₂ from aqueous solutions at pH 6 within the range 290-710 mg/g (ACF) which can be favourably compared with other studies already published. The use of a filter made with an activated carbon fibre modified by powdered sulfur totally removed the mercury species present in the flue gases produced by combustion of fossil fuel.     

On a recursive method for the estimation of unknown parameters of partially observed chaotic systems

We investigate a recently proposed method for on-line parameter estimation and synchronization in chaotic systems. This novel technique has been shown effective to estimate a single unknown parameter of a primary chaotic system with known functional form that is only partially observed through a scalar time series. It works by periodically updating the parameter of interest in a secondary system, with the same functional form as the primary one but no explicit coupling between their dynamic variables, in order to minimize a suitably defined cost function. In this paper, we review the basics of the method, and investigate its robustness and new extensions. In particular, we study the performance of the novel technique in the presence of noise (either observational, i.e., an additive contamination of the observed time series, or dynamical, i.e., a random perturbation of the system dynamics) and when there is a mismatch between the primary and secondary systems. Numerical results, including comparisons with other techniques, are presented. Finally, we investigate the extension of the original method to perform the estimation of two unknown parameters and illustrate its effectiveness by means of computer simulations.