Conformational structure of N-methylpropionamide and N-methylisobutyroamede. NMR shift reagent and IR study

The structures of the stable conformers of N-methyjpropionamide and N-methyliso-butyroamide in CCl₄, solution were determined by a combination of IR spectroscopy and NMR spectroscopy with lanthanide shift reagents. N-methyl-propionamide was found to exist in the form of two rotational isomers, 1 and 2, with the ethyl group twisted out of the plane of the amide bond by the angles Ψ = 140 and 20°, respectively. For these two conformers, the enthalpy difference is ΔH = 2.13 ± 0.08 kcal mole^?1 and the entropy difference ΔS = 7.81 ± 0.55 cal mole^?1 grad^?1. N-methylisobutyroamide exists in a single form, with the two C-methyl group positions very close to those found in the two isomers of N-methylpropionamide.     

Swelling and dissolution of latex dispersions of the ethyl acrylate-methacrylic acid copolymers during alkalization

By using non-Newtonian viscometry and the static light-scattering method, changes in the structure of particles of latex dispersions of ethyl acrylate-methacrylic acid copolymer during alkalization with ammonium hydroxide were investigated. It was found that in dispersions with an acid content up to 20 wt% the particles only swell; at acid content between 20 and 40 wt% they decompose to smaller units represented by supermolecular aggregates of macromolecules, and only when approximately starting from 40 wt% of acid does the copolymer become molecularly dissolved. This means that even if dispersions with an acid content from c. 20 wt% are clarified by alkalization, no complete dissolution takes place.     

Electron attachment and vibrational excitation in hydrogen iodide: calculations based on the nonlocal resonance model

High resolution laser spectroscopy has been applied to study the hyperfine structure of excited energy levels of Thulium I. As part of our aim to complete the fine and hyperfine structure of the Tm I spectra 51 transitions in the visible were measured and precise values for the magnetic dipole hyperfine structure constants A of 24 odd and 19 even levels were determined. In addition, a new energy level of even parity with J = 3/2 is found at 27 509.40 (5)cm^?1 using laser induced fluorescence spectroscopy.     

Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

Polymerization of styrene started by free radicals,generated by external force action-chemical potential gradient of the swelling agent — on the PVC/solvent optical phase boundary

Summary There were studied the process of styrene polymerization in PVC swollen surface layer initiated by free radicals generated under the action of chemical potential gradient as an external force. It was found that conversion of styrene into the block copolymer is an diffusion controlled process.

---

Zusammenfassung Die Initiation des Prozesses der Polymerization von Styrol in den Oberflächenquellungsschichten von PVC wurde untersucht.Dabei wurde festgestellt, daß die freien Radikale, welche bei Zerreißung von spannungsbeanspruchten Bindungen, wie sie durch Einfluß von äußeren Kräften auf den Gradienten des chemischen Potentials des Quellungsmittels an Oberflächenquell bildungsmittel Polymer entstehen können, Polymerizationsprozesse des olefinischen Quellungsmittels initiieren können.

---

---

Dedicated to ProfessorV. Kellö in celebration of his 60th birthday.     

Ascorbate oxidase

Ascorbate oxidase fromCucurbita sp. was isolated by ammonium sulfate precipitation and DEAE-dextran-silochrome column chromatography. The thermal and pH stabilities of the purified enzyme were investigated. TheK _M forl-ascorbic acid (1.5 mM) and chlorohydroquinone (0.37 mM) was determined. Substrate specificity of ascorbate oxidase was investigated and compared with those of laccases fromCoriolus hirsutus andCerrena maxima. Ascorbate oxidase was covalently bound to a polymeric membrane and used in an enzyme electrode for ascorbic acid.     

Determination of heavy metal concentrations in plants exposed to different degrees of pollution using ICP-AES

Plant samples (Plantago lanceolata - narrow leaf plantain and Cichorium endiviae - endive) were collected in the surroundings of heavy metal emission sources and in other less contaminated areas. After digestion in a closed microwave system using HNO(3), the concentrations of Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, and Zn were determined using ICP-AES. Detection limits for all the elements of interest are given. Differences in heavy metal uptake rate between both plant species were observed. The uptake is more intensive for endive than for narrow leaf plantain. High concentrations of some heavy metals were determined in the unwashed plant samples as a result of exposure to aerosols. Tukey's statistical test was used to confirm the discrepancy of Cr concentration in plant samples from various areas. Washing the leaves with water was found to remove a large amount of water-soluble aerosols.     

Frequent analytical/experimental problems in lipase-mediated synthesis in solvent-free systems and how to avoid them

Compared with chemical catalysis, enzymatic catalysis is a relatively new topic. Experimental work involving lipases deserves careful attention and accurate procedures still need to be implemented. A rapid but careful survey of published data immediately demonstrates that experiments performed under similar conditions with similar reagents have led to very different results. The aim of this work is to point out the importance of accurate and systematic procedures in order to ensure the reproducibility of experimental data. We strongly believe that different results found by different labs are due to problems detected in the procedures used. Quantification of the immobilisation efficiency of lipase on several supports through UV/visible methods and sampling methods used to obtain correct enzymatic activity values are specifically analysed. After a brief review which demonstrates the big discrepancies found in the literature, original data from Candida rugosa lipase adsorption on polypropylene powder and its use in the solvent-free synthesis of ethyl oleate are introduced in order to exemplify the difficulties found in these kinds of systems. Several procedures described in the literature are assayed and the accuracy of the results obtained is carefully analysed. The aim of the whole analysis performed is that it would be useful for any powdered solid to be used as a support for a lipase in a solvent-free system for any synthesis reaction, especially for those involving a volatile reagent. Throughout this contribution, special emphasis is placed on how catalytic reaction results using enzymes (free and immobilised) are reported so as to allow comparison between published data, something which is usually difficult since very different units are used and often complementary data are not included.     

Estimation scheme for level-dependent uncertainty of analytical result: application for determination of 1-hydroxypyrene in urine

The estimation scheme of uncertainty of determination of 1-hydroxypyrene (1-OHP) in urine was developed analysing the main stages of the analytical procedure: (1) preparation of 1-OHP standards, (2) creation of the calibration curve for the high performance liquid chromatography (HPLC) analysis method with the evaluation of recovery, (3) measuring procedure of aliquot of urine, (4) adjusting the pH of aliquot and hydrolysis with enzyme, (5) solid phase extraction, (6) concentration of the extract, (7) injection of the extract to chromatograph and analysing by the HPLC method, (8) calculation of 1-OHP mass from the calibration curve, (9) calculation of 1-OHP concentration in urine. The evaluation of the uncertainty is based on quantification of individual components. Combined uncertainty was calculated using the law of propagation of uncertainties according to the EURACHEM/CITAC guidelines. Level dependence of the uncertainty arises from the calibration curve. The limits of detection and quantification were found to be equal to 0.03 and 0.1 ng/mL, respectively. The calculated expanded level-dependent uncertainty covers 47–27–25% within the concentration range 0.03–0.1–0.4 ng/mL with the materials and equipment used. These parameters could easily be recalculated according to the proposed scheme if there are some changes in the analysis procedure.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.