Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

混合基质水处理膜:材料、制备与性能

以反渗透、纳滤为代表的膜技术已广泛应用于海水和苦咸水脱盐等水处理过程。通过将纳米颗粒添加到传统复合膜基质中,可以制备具有高分离性能和耐污染性的新型膜材料。混合基质膜结合了无机材料及有机聚合物各自的优点,是新型水处理膜材料的发展方向。本文综述了添加无机纳米颗粒的混合基质反渗透、纳滤及正渗透膜的研究进展,详细讨论了不同类型纳米材料的性质和功能,分析了表面有机改性对改善纳米材料分散性以及与聚合物基质相容性的作用,探讨了纳米材料添加方式和膜制备方法对膜结构和性能的影响。在此基础上,进一步探究了混合基质膜的成膜及分离机理,归纳了目前研究中存在的主要问题,并对未来水处理膜材料的研发方向提出了建议。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

哈茨木霉CGMCC 2979生物转化栀子中的京尼平苷制备京尼平

采用微生物直接转化药材的方法,将栀子中的京尼平苷转化为京尼平,无需糖苷酶和京尼平苷的制备. 在培养温度为30 ℃,pH 6.1以及栀子载量为80 g/L的条件下,48 h京尼平苷的转化率为97.8%. 转化后的京尼平通过XAD-16N大孔树脂偶联硅胶层析的方法,制备得到纯度大于95%的京尼平,收率为62.3%. 在催化、转化机制研究中,从哈茨木霉CGMCC2979的发酵液中分离得到了分子量为74.4 kDa的京尼平苷β-葡萄糖苷酶,该酶最优催化条件为50 ℃和pH 4.0-5.0. K_m和V_max分别为3.6 mmol/L和775 μmol/h/mg蛋白. 本文提供了一种简便、高效制备京尼平的新方法.     

改性ZSM-5分子筛催化裂解湛江等鞭金藻制取低碳烯烃(英)

研究了湛江等鞭金藻(Isochrysis zhanjiangensis)在改性ZSM-5分子筛上催化裂解制取低碳烯烃的过程.与热裂解过程相比,湛江等鞭金藻催化裂解可以得到更高的低碳烯烃选择性和收率.同时还研究了湛江等鞭金藻中不同油脂和藻渣的催化裂解.结果表明,微藻中的油脂能有效转化为烯烃,其中中性脂的烯烃收率最高,可达36.7%.不同溶剂抽提后得到的藻渣也可转化为低碳烯烃,但收率远低于微藻中的油脂.微藻中的油脂,特别是中性脂,是烯烃的主要贡献者,提高微藻中的中性脂含量能够得到更高的低碳烯烃收率.     

Synthesis and Rheological Investigation ofModel Symmetric 3-Arm Star Polyethylene简

A variety of linear and 3-arm star polyethylene （PE） model polymers covering a wide range of molecular weight are synthesized by the living polymerization of butadiene and the subsequent hydrogenation. Several rheological parameters of these model linear and 3-arm star PE samples are analyzed for detecting the long chain branching （LCB） structure. It is found that the analyses based on zero shear viscosity, vGP plot and flow activation energy are very sensitive to the 3-arm star PEs. The information on the presence of LCB can be obtained with these methods even for low molecular weight samples, which can not be determined by GPC-MALLS. However the information about the LCB structure can not be obtained by the rheological methods alone.     

Conductive Cotton Prepared by Polyaniline In Situ Polymerization Using Laccase

The high-redox-potential catalyst laccase, isolated from Aspergillus, was first used as a biocatalyst in the oxidative polymerization of water-soluble conductive polyaniline, and then conductive cotton was prepared by in situ polymerization under the same conditions. The polymerization of aniline was performed in a water dispersion of sodium dodecylbenzenesulfonate (SDBS) micellar solution with atmospheric oxygen serving as the oxidizing agent. This method is ecologically clean and permits a greater degree of control over the kinetics of the reaction. The conditions for polyaniline synthesis were optimized. Characterizations of the conducting polyaniline and cotton were carried out using Fourier transform infrared spectroscopy, UV–vis spectroscopy, cyclic voltammetry, the fabric induction electrostatic tester, and the far-field EMC shielding effectiveness test fixture.     

An oxovanadium(IV) complex with o-vanillin-valine Schiff base and 1,10-phenanthroline ligands: synthesis,crystal structure and DNA interactions

A new mixed-ligand V(IV) complex, [VO(o-Van-Val)(phen)]·CH₃CN (o-Van-val = Schiff base derived from o-vanillin and l-valine, phen = 1,10-phenanthroline), was synthesized and characterized by physico-chemical methods and single-crystal X-ray diffraction. In the crystal, the V(IV) atom is six-coordinated by one oxo ligand, two oxygen atoms and one nitrogen atom from a valine Schiff base ligand, and two nitrogen atoms from 1,10-phenanthroline, giving a distorted octahedral arrangement. The DNA-binding properties of the complex were investigated by spectroscopic methods and viscosity measurements. The results suggest that the oxovanadium(IV) complex binds to DNA in an intercalation mode.     

Fabrication of anisotropic silica hollow microspheres using polymeric protrusion particles as templates

Anisotropic polystyrene/poly(styrene-co-divinylbenzene) (PS/P(S-DVB)) protrusion particles with various morphologies such as eyeball-like, snowman-like, and raspberry-like were synthesized using a modified seeded polymerization method by dynamically controlling and stabilizing the phase separation. The effects of swelling agent, crosslinker, and monomer concentrations on the particle morphologies were studied. Using the PS/P(S-DVB) protrusion particles as templates, anisotropic silica (SiO₂) hollow microspheres were fabricated facilely. The obtained anisotropic silica hollow spheres had a potential application in rapid waste removal and detoxification extraction with a very simple procedure.     

Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G

Conducting polymers are excellent sensing materials in the design of bioanalytical sensors because of their electronic conductivity, low energy optical transitions, biocompatibility, and room temperature operation. Among them, Polypyrrole (Ppy) is one of the most extensively used conducting polymers because of a number of properties such as redox activity, rapid electron transfer, and ability to link a variety of biomolecules to pyrrole groups by chemical treatment. In this study, Ppy nanowires were synthesized by an electrospinning method. The nanowires were prepared from a solution mixture of Ppy and poly(ethylene oxide). The method of detection in such a device is based on the selective binding of antigen onto an antibody that is covalently attached to the nanowires. Thus, anti-IgG was immobilized on Ppy nanowires using an EDC {[N-(3-dimethyl aminopropyl)-N₂-ethylcarbodiimide hydrochloride]}-NHS(N-hydrosuccinimide) modified technique. Fluorescence images of BSA–FITC (fluorescein isothiocyanate labeling of bovine serum albumin) conjugation demonstrated that antibody was functionalized on the Ppy nanowires without non-specific binding and facilitated selective detection of antigen. Current–voltage (I–V) characterization was used to monitor the change in the conductivity of nanowires while the specific binding interaction occurred. These results of electrical properties enable Ppy nanowire-based biosensors to detect biomolecules in real-time.