Thiol-functionalized anthraquinones: mass spectrometry and electrochemical studies

Abstract  

In this work, the synthesis of various thiol-functionalized anthraquinone compounds is presented. The studied compounds were characterized by mass spectrometry and the main fragmentation pathways are discussed. The compounds studied formed stable self-assembled monolayers (SAMs) in the gold surface. The parameters for the reduction processes in the gold surface of the studied new anthraquinones were determined by cyclic voltamperometry tests.     

Multiresidue determination of 160 pesticides in wines employing mixed-mode dispersive-solid phase extraction and gas chromatography-tandem mass spectrometry

A new multiresidue method for the efficient screening, identification and quantification of over 160 pesticides belonging to different chemical classes in red, rose and white wines have been developed. The analysis was based on gas chromatographic-tandem quadrupole mass spectrometric determination (GC-QqQ-MS/MS). An optimization strategy involved the selection of buffering conditions and sorbents for dispersive-solid phase extraction (dispersive-SPE) in order to achieve acceptably high recoveries and reduce co-extractives in the final extracts. As a result, the optimized procedure allowed us to obtain consistent recoveries of the target pesticides including problematic ones such as captan, chlorothalonil, dichlofluanid, folpet and tolylfluanid. The attained recoveries were typically between 80 and 110% (89% on average) with RSD values typically lower than 10% (8% on average) at three spiking levels of 0.01, 0.05 and 0.2 mg kg⁻¹. Linearity was studied in the range between 0.005 and 0.2 mg kg⁻¹ using pesticide standards prepared both in pure solvent and in the presence of matrix, showing coefficients of determination (R²) higher than 0.99 for all the pesticides except for desmedipham, thiabendazole and thiamethoxam in pure solvent. The study of the ratio of the slopes obtained in solvent and in matrix provided information about the matrix effects, which was <10%, 10-20% and >20% for 33, 36 and 31% of the studied pesticides, respectively. To improve accuracy, matrix matched standards were always used for calculation of the quantification results. The expanded uncertainties were estimated by using a “top-down” approach as being 17% on average (coverage factor k = 2, confidence level 95%). Finally, the method was used with success to detect and quantify pesticide residues in commercial wines.     

Structural studies of Cu(II) binding to the novel peptidyl derivative of quinoxaline: N-(3-(2,3-di(pyridin-2-yl)quinoxalin-6-yl)alanyl)glycine

The coordination properties of the novel conjugate towards copper ions were investigated. The performed studies exhibited the unusual binding properties of the ligand molecule having two potential strong coordination sites, namely dipeptidic chain and pyridyl nitrogens. On the basis of potentiometric and spectroscopic studies the binding at the low pH values to the aromatic entity is suggested, while the rise of pH (including physiological one) yielded the dimeric head-to-tail complex formation. This stable species possesses three nitrogen donors involved in Cu(II) chelation: N(pirydyl), NH₂ and N⁻(amide).     

Stability and structure of mixed-ligand metal ion complexes that contain Ni2+, Cu2+, or Zn2+, and Histamine, as well as adenosine 5'-triphosphate (ATP4-) or uridine 5'-triphosphate (UTP(4-): an intricate network of equilibria

With a view on protein–nucleic acid interactions in the presence of metal ions we studied the “simple” mixed‐ligand model systems containing histamine (Ha), the metal ions Ni²⁺, Cu²⁺, or Zn²⁺ (M²⁺), and the nucleotides adenosine 5′‐triphosphate (ATP^4?) or uridine 5′‐triphosphate (UTP^4?), which will both be referred to as nucleoside 5′‐triphosphate (NTP^4?) . The stability constants of the ternary M(NTP)(Ha)^2? complexes were determined in aqueous solution by potentiometric pH titrations. We show for both ternary‐complex types, M(ATP)(Ha)^2? and M(UTP)(Ha)^2?, that intramolecular stacking between the nucleobase and the imidazole residue occurs and that the stacking intensity is approximately the same for a given M²⁺ in both types of complexes: The formation degree of the intramolecular stacks is estimated to be 20 to 50 %. Consequently, in protein–nucleic acid interactions imidazole–nucleobase stacks may well be of relevance. Furthermore, the well‐known formation of macrochelates in binary M²⁺ complexes of purine nucleotides, that is, the phosphate‐coordinated M²⁺ interacts with N7, is confirmed for the M(ATP)^2? complexes. It is concluded that upon formation of the mixed‐ligand complexes the M²⁺? N7 bond is broken and the energy needed for this process corresponds to the stability differences determined for the M(UTP)(Ha)^2? and M(ATP)(Ha)^2? complexes. It is, therefore, possible to calculate from these stability differences of the ternary complexes the formation degrees of the binary macrochelates: The closed forms amount to (65±10) %, (75±8) %, and (31±14) % for Ni(ATP)^2?, Cu(ATP)^2?, and Zn(ATP)^2?, respectively, and these percentages agree excellently with previous results obtained by different methods, confirming thus the internal validity of the data and the arguments used in the evaluation processes. Based on the overall results it is suggested that M(ATP)^2? species, when bound to an enzyme, may exist in a closed macrochelated form only, if no enzyme groups coordinate directly to the metal ion.     

(Liquid + liquid) equilibria of binary systems containing hyperbranched polymer Boltorn® H2004 – Experimental study and modelling in terms of lattice-cluster theory

(Liquid + liquid) phase equilibria (LLE) of binary mixtures containing hyperbranched polymer Boltorn® H2004 and n-alkanes (n-hexane, n-heptane, n-octane, and n-decane) were studied over the temperature range from about (260 up to 360) K. The polymer is partially miscible with n-alkanes and the solubility decreases with an increase of the chain length of the solvent. Corresponding LLE phase diagrams including spinodal and binodal (liquid + liquid) coexistence curves were calculated in terms of the statistical mechanics – based on the lattice-cluster theory, based only on the upper critical solution temperature, and the polymer chain architecture. The results show semi-qualitative agreement of predicted and experimental equilibrium compositions and temperatures. Boltorn® H2004 reveals complete miscibility in the liquid phase with alcohols (C₁–C₈), aromatic hydrocarbons (benzene, toluene, and thiophene), and ethers (methyl tetra-butyl ether, ethyl tetra-butyl ether, and tetrahydrofurane).     

Role of molecular oxygen and its active forms in generation of electrochemiluminescence

A short review is dedicated to the role of molecular oxygen and its active forms in generation of electrochemiluminescence (ECL). It is shown at the example of such widely used luminogens as luminol, lucigenin, acridine esters, acridane, and indoles that the role of O₂ and its active forms, such as hydrogen peroxide, superoxide and hydroperoxide radicals in generation of ECL by organic compounds is largely reduced to oxidation of the initial luminogen or intermediates of its partial electrochemical preoxidation/prereduction. Such intermediates are most often particles in the doublet state (radical-cation, radical-anion, or free radicals) that form unstable emitter precursors of peroxide (dioxetanone) type under interaction with O₂, hydrogen peroxide, or other active oxygen forms. It is also shown that the product of secondary transformations of active oxygen forms is singlet oxygen that may also be a radiation source as a result of cooperative transitions.     

Spectrophotometric determination of <Emphasis Type="Italic">L</Emphasis>-ascorbic acid in pharmaceuticals

A simple and sensitive spectrophotometric method for the determination of L-ascorbic acid with leuco crystal violet is proposed. The determination is based on the oxidation of analyte by potassium iodate. The colourless oxidation products were formed in the quantity equivalent to iodide ions. The iodide ions react with the excess of iodate ions in acidic medium, to form free iodine which oxidized leuco crystal violet (LCV) to the liberated crystal violet (CV ⁺) dye, showing maximum absorption at 588 nm. The absorbance was measured at pH of 4.1–4.2 in 1 cm cuvettes. Beer’s law was obeyed in the concentration range 0.5–4.0 μg/mL. The molar absorptivity of the coloured compound is 4.14 × 10⁴ L/mol cm for L-ascorbic acid. The analytical parameters were optimized and the method was successfully applied to the determination of L-ascorbic acid in pharmaceuticals. The results were compared with those obtained by methods proposed in Polish Standard.     

Stability studies of clonazepam, diazepam, haloperidol, and doxepin with diverse polarities in an acidic environment

Stability of clonazepam, diazepam, haloperidol, and doxepin was determined in acidic solutions. In addition, determination of the kinetic and thermodynamic properties of this stability was carried out. Reaction rate constants (k), half-life times (t(0.1) and t(0.5)), and activation energy (Ea) were estimated for the drugs, which differed in polarity expressed with log P values. It was observed that estimated Ea values increased from 42.13 to 125.03 kJ/mol with an increase of lipophilicity (log P) beginning from the most hydrophilic drug (clonazepam, 2.70 log P) to the most lipophilic drug (doxepin, 4.10 log P). All degradation products were studied using an HPLC/electrospray ionization-MS technique in the positive ionization mode.     

Vibrational characterization of L-leucine phosphonate analogues: FT-IR, FT-Raman, and SERS spectroscopy studies and DFT calculations

This study reports the Raman (FT-Raman) and absorption infrared (FT-IR) spectra, based on calculated wavenumbers and normal modes of vibrations, of the following compounds: L-Leu-D-NH-CH(Me)-PO(3)H(2) (LI), L-Leu-NH-C(Me)(2)-PO(3)H(2) (LII), L-Leu-D-NH-CH(Et)-PO(3)H(2) (LIII), L-Leu-L-NH-CH(Et)-PO(3)H(2) (LIV), L-Leu-L-NH-CH(EtOH)-PO(3)H(2) (LV), L-Leu-NH-C(Me)(Et)-PO(3)H(2) (LVI), L-Leu-L-NH-CH(PrA)-PO(3)H(2) (LVII), L-Leu-L-NH-CH(c-Pr)-PO(3)H(2) (LVIII), L-Leu-L-NH-CH(t-Bu)-PO(3)H(2) (LIX), L-Leu-L-NH-CH(BuA)-PO(3)H(2) (LX), L-Leu-L-NH-CH(c-Bu)-PO(3)H(2) (LXI), and L-Leu-L-NH-C(Adm)-PO(3)H(2) (LXII). The equilibrium geometries and vibrational wavenumbers were calculated using density functional theory (DFT) at the B3LYP, 6-311++G** level using Gaussian 03, Raint, GaussSum 0.8, and Gar2ped software. We briefly compare and analyze the experimental and calculated vibrational wavenumbers in the range 4000-400 cm(-1). In addition, the Raman wavenumbers are compared to those from the surface-enhanced Raman scattering (SERS) spectra for the phosphono analogues of l-leucine (l-Leu) adsorbed on a colloidal silver surface in an aqueous solution. The geometries of these molecules etched on the silver surface were deduced from observed changes in both the intensity and broadness of Raman bands in the spectra of the bound versus free species. For example, LVI appears to adsorb onto the colloidal silver particles mainly through the amine group and amide bond, which assists in the adsorption process, whereas LII shows strongly enhanced SERS bands due to the rocking, twisting, and stretching vibrations of the N(amid)C(sg)(Me)(2)P fragment, suggesting that this peptide's interaction with the silver surface occurs mainly via this fragment. On the other hand, the most dominant SERS bands of LIII and LIV due to the P═O bond stretches reflect P═O···Ag complex formation.