Polymerization of methylmethacrylate in presence of tetramethylthiuramdisulphide

The effect of TMTD on the polymerization of methyl methacrylate was studied. The plot of $\text{R}{}_{\mathrm{P}}\text{vs [TMTD]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ shows a maximum ascribed to participation of TMTD-radicals in cross (P′ + RS′) and mutual-termination (RS′ + RS′). The total polymerization rate is then well expressed by a derived relation. Study of the influence of TMTD on the molecular weight of polymethylmethacrylate allows characterization of the transfer process.     

Field and temperature dependence of magnetization of U3P4

Conclusions We conclude that the occurrence of a maximum in the magnetization versus temperature curve observed under certain circumstances on U₃P₄ is not connected with its intrinsic magnetic structure, but substantially depends on the form in which the material is studied (polycrystalline powder, single crystal, single crystal powders with various dimensions of grains). This phenomenon seems to be affected by quenching of the state from the region of low anisotropy at higher temperature in the small particles with a strong tendency to single domain behaviour and thus it may be a consequence of rotation magnetization process in the fields relatively small for U₃P₄. The assertion about transitions between magnetic ordering, sometimes proposed in the literature on the basis of observed anomalies in the temperature course of magnetization without simultaneous confirmation by neutron diffraction, should be accepted with some reservation, especially in the case of simple uranium compounds. However, another situation arises for pseudobinary alloys of ferro- and antiferromagnetic components (e.g. UP_0·75S_0·25) where such transitions were confirmed both by magnetic methods and by neutron diffraction studies [13].The authors would like to express their thanks to Ing. A.Meovský for careful preparation of samples.     

Regioselective Synthesis of 5- and 3-Hydroxy-N-Aryl-1H-Pyrazole-4-Carboxylates and Their Evaluation as Inhibitors of Plasmodium falciparum Dihydroorotate Dehydrogenase

In silico evaluation of various regioisomeric 5- and 3-hydroxy-substituted alkyl 1-aryl-1H-pyrazole-4-carboxylates and their acyclic precursors yielded promising results with respect to their binding in the active site of dihydroorotate dehydrogenase of Plasmodium falciparum (PfDHODH). Consequently, four ethyl 1-aryl-5-hydroxy-1H-pyrazole-4-carboxylates and their 3-hydroxy regioisomers were prepared by two-step syntheses via enaminone-type reagents or key intermediates. The synthesis of 5-hydroxy-1H-pyrazoles was carried out using the literature protocol comprising acid-catalyzed transamination of diethyl [(dimethylamino)methylene]malonate with arylhydrazines followed by base-catalyzed cyclization of the intermediate hydrazones. For the synthesis of isomeric methyl 1-aryl-3-hydroxy-1H-pyrazole-4-carboxylates, a novel two-step synthesis was developed. It comprises acylation of hydrazines with methyl malonyl chloride followed by cyclization of the hydrazines with tert-butoxy-bis(dimethylamino)methane. Testing the pyrazole derivatives for the inhibition of PfDHODH showed that 1-(naphthalene-2-yl)-5-hydroxy-1H-pyrazole-4-carboxylate and 1-(naphthalene-2-yl)-, 1-(2,4,6-trichlorophenyl)-, and 1-[4-(trifluoromethyl)phenyl]-3-hydroxy-1H-pyrazole-4-carboxylates (~30% inhibition) were slightly more potent than a known inhibitor, diethyl α-{[(1H-indazol-5-yl)amino]methylidene}malonate (19% inhibition).     

Raman Method in Identification of Species and Varieties,Assessment of Plant Maturity and Crop Quality—A Review

The present review covers reports discussing potential applications of the specificity of Raman techniques in the advancement of digital farming, in line with an assumption of yield maximisation with minimum environmental impact of agriculture. Raman is an optical spectroscopy method which can be used to perform immediate, label-free detection and quantification of key compounds without destroying the sample. The authors particularly focused on the reports discussing the use of Raman spectroscopy in monitoring the physiological status of plants, assessing crop maturity and quality, plant pathology and ripening, and identifying plant species and their varieties. In recent years, research reports have presented evidence confirming the effectiveness of Raman spectroscopy in identifying biotic and abiotic stresses in plants as well as in phenotyping and digital selection of plants in farming. Raman techniques used in precision agriculture can significantly improve capacities for farming management, crop quality assessment, as well as biological and chemical contaminant detection, thereby contributing to food safety as well as the productivity and profitability of agriculture. This review aims to increase the awareness of the growing potential of Raman spectroscopy in agriculture among plant breeders, geneticists, farmers and engineers.     

Catalytic Performance of One-Pot Synthesized Fe-MWW Layered Zeolites (MCM-22, MCM-36, and ITQ-2) in Selective Catalytic Reduction of Nitrogen Oxides with Ammonia

The application of layered zeolites of MWW topology in environmental catalysis has attracted growing attention in recent years; however, only a few studies have explored their performance in selective catalytic reduction with ammonia (NH₃-SCR). Thus, our work describes, for the first time, the one-pot synthesis of Fe-modified NH₃-SCR catalysts supported on MCM-22, MCM-36, and ITQ-2. The calculated chemical composition of the materials was Si/Al of 30 and 5 wt.% of Fe. The reported results indicated a correlation between the arrangement of MWW layers and the form of iron in the zeolitic structure. We have observed that one-pot synthesis resulted in high dispersion of Fe³⁺ sites, which significantly enhanced low-temperature activity and prevented N₂O generation during the reaction. All of the investigated samples exhibited almost 100% NO conversion at 250 °C. The most satisfactory activity was exhibited by Fe-modified MCM-36, since 50% of NO reduction was obtained at 150 °C for this catalyst. This effect can be explained by the abundance of isolated Fe³⁺ species, which are active in low-temperature NH₃-SCR. Additionally, SiO₂ pillars present in MCM-36 provided an additional surface for the deposition of the active phase.     

Aminophosphinic Acids in a Pyridine Series: Cleavage of Pyridine-2- and Pyridine-4-methyl(amino)phosphinic Acids in Acidic Solutions

The synthesis of a series of new pyridine aminomethylphosphinic acids is described. These compounds were obtained in the reaction of the corresponding pyridine aldehydes with primary amines and with ethyl phenylphosphinate, or methylphosphinate, in the presence of bromotrimethylsilane. In aqueous, strong acid solutions, pyridine aminophosphinic acids were split, forming the phenyl-, or methylphosphonic, acid and the corresponding secondary pyridyl-alkylamines. The kinetics of some observed cleavages were measured, and a mechanism of the cleavage has been proposed.     

Rearrangement of hexadecane molecules confined in the nanopores of a controlled pore glass using positron annihilation and differential scanning calorimetry

The solidification/melting of cetane confined in nine silica glasses with specific controlled pores (CPG) with different pore sizes (r _p ranging from 3.7–72 nm) has been studied. Samples with variable coefficient of filling of cetane were prepared and analyzed. Combining the indication of the evolving solidification heats (via differential scanning calorimetry, DSC) with the lifetime spectra of positron annihilation, the mechanism of filling of cetane molecules in the pores of the hosting silica glass matrices has been searched. Three independent solidification effects—three independent DSC peaks—were observed in each measuring cycle, namely one crystallization exotherm Rb of the bulk-cetane (if present) and two crystallization sub-peaks Rc1 and Rc2 of the confined cetane in the case of continuous cooling. The temperatures of both Rc1 and Rc2 effects decrease on decreasing the r _p of the CPG matrix. The mutual relation between Rc1 and Rc2 has been analyzed. The kinetics of all three steps of the solidification in the continuous-cooling as well as isothermal regimes have been specified.     

Photophysics of Push–Pull Distyrylfurans,Thiophenes and Pyridines by Fast and Ultrafast Techniques

Time‐resolved transient absorption and fluorescence spectroscopy with nano‐ and femtosecond time resolution were used to investigate the deactivation pathways of the excited states of distyrylfuran, thiophene and pyridine derivatives in several organic solvents of different polarity in detail. The rate constant of the main decay processes (fluorescence, singlet–triplet intersystem crossing, isomerisation and internal conversion) are strongly affected by the nature [locally excited (LE) or charge transfer (CT)] and selective position of the lowest excited singlet states. In particular, the heteroaromatic central ring significantly enhances the intramolecular charge‐transfer process, which is operative even in a non‐polar solvent. Both the thiophene and pyridine moieties enhance the S₁→T₁ rate with respect to the furan one. This is due to the heavy‐atom effect (thiophene compounds) and to the ¹(π,π)*→³(n,π)* transition (pyridine compounds), which enhance the spin‐orbit coupling. Moreover, the solvent polarity also plays a significant role in the photophysical properties of these push–pull compounds: in fact, a particularly fast ¹LE*→¹CT* process was found for dimethylamino derivatives in the most polar solvents (time constant, τ≤400 fs), while it takes place in tens of picoseconds in non‐polar solvents. It was also shown that the CT character of the lowest excited singlet state decreased by replacing the dimethylamino side group with a methoxy one. The latter causes a decrease in the emissive decay and an enhancement of triplet‐state formation. The photoisomerisation mechanism (singlet/triplet) is also discussed.