Mechanically responsive films of variable hydrophobicity made of polyelectrolyte multilayers

Mechanically responsive surfaces that allow to switch reversibly from a hydrophobic to a hydrophilic substrate are reported. The surfaces are constituted of polyelectrolyte multilayers deposited on modified charged silicone sheets. n bilayers of poly(allylamine)-Nafion (PAH-Naf) and m bilayers of poly(allylamine)-poly(acrylic acid) (PAH-PAA) composed the multilayers. A (PAH-Naf)(n) film possesses a water contact angle of around 105 degrees, whereas the contact angle of a (PAH-Naf)(4)-(PAH-PAA)(m) multilayer is around 50 degrees. When such a film with m < 5 and terminated by PAA is stretched out, its water contact angle increases up to around 100 degrees. Successive elongation/retraction cycles allow the water contact angle to alternate reversibly between 100 and 57 degrees indicating the reversible mechanical responsive nature of the film.     

A study of two-electron quantum dot spectrum using discrete variable representation method

A variational method called discrete variable representation is applied to study the energy spectra of two interacting electrons in a quantum dot with a three-dimensional anisotropic harmonic confinement potential. This method, applied originally to problems in molecular physics and theoretical chemistry, is here used to solve the eigenvalue equation to relative motion between the electrons. The two-electron quantum dot spectrum is determined then with a precision of at least six digits. Moreover, the electron correlation energies for various potential confinement parameters are investigated for singlet and triplet states. When possible, the present results are compared with the available theoretical values.     

Ab initio study of the binding of Trichostatin A (TSA) in the active site of histone deacetylase like protein (HDLP)

Histone deacetylase (HDAC) inhibitors have recently attracted considerable interest because of their therapeutic potential for the treatment of cell proliferative diseases. An X-ray structure of a very potent inhibitor, Trichostatin A (TSA), bound to HDLP (an HDAC analogue isolated from Aquifex aeolicus), is available. From this structure, an active site model (322 atoms), relevant for the binding of TSA and structural analogues, has been derived, and TSA has been minimized in this active site at HF 3-21G* level. The resulting conformation is in excellent accordance with the X-ray structure, and indicates a deprotonation of the hydroxamic acid in TSA by His 131. Also, a water molecule was minimized in the active site. In addition to a similar deprotonation, in accordance with a possible catalytic mechanism of HDAC as proposed by Finnin et al. (M. S. Finnin, J. R. Donigian, A. Cohen, V. M. Richon, R. A. Rifkind and P. A. Marks, Nature, 1999, 401, 188-193), a displacement of the resulting OH- ion in the active site was observed. Based on these results, the difference in energy of binding between TSA and water was calculated. The resulting value is realistic in respect to experimental binding affinities. Furthermore, the mechanism of action of the His 131-Asp 166 charge relay system was investigated. Although the Asp residue in this motif is known to substantially increase the basicity of the His residue, no proton transfer from His 131 to Asp 166 was observed on binding of TSA or water. However, in the empty protonated active site, this proton transfer does occur.     

The Fermi doublet V2−V3 + V4 of CH3CN as a probe of molecular interactions

The Fermi doublet V₂?V₃ + V₄ of CH₃CN in basic, inert and acidic solvents has been studied by IR and Raman spectroscopy. The values of W, the Fermi coupling coefficient, obtained from IR spectra varies with the nature of the solvent while W evaluated from Raman data remains constant at 12.5 ± 0.5 cm^?1. The similar effects of Bronsted and Lewis acids on the band frequencies and intensities is evidence that the CN group complexes with acids via the N atom “n” electron pair and not the π bond.     

Fast sample preparation involving MASE and coupled column normal phase liquid chromatography for the rapid trace analysis of dioxins in air-dust samples from fire catastrophe emissions

A new approach has been developed and tested for the urgent analysis of dioxins in samples of air-dust filters originating from catastrophe emissions. The procedure consists of a fast extraction of the sample with microwave solvent extraction (MASE) and acetone as solvent followed by a fast cleanup of the extract with normal phase coupled column liquid chromatography (LC/LC).

The multi-dimensional LC/LC system employs a 50 mm×4.6 mm i.d. column packed with 3 μm silica and a 150 mm×4.6 mm i.d. column packed with 5 μm PYE as the first and second analytical column, respectively. Iso-hexane is used on both columns to perform cleanup and dichloromethane to perform efficient back-flush elution of the compounds from the second column. The obtained polarity-based separation in the first dimension and molecular-structure based separation in the second dimension provides a fast and powerful cleanup.

Validation was done by analysing samples of homemade RIVM air-dust with aged residues (n=8, spiking level about 15 pg mg⁻¹ per compound) of dioxins/furans and samples of reference Urban Dust SRM 1649a (n=4) with both the new approach and the existing conventional procedure and were instrumentally analyzed with capillary gas chromatography and high resolution mass spectrometric detection (GC/HRMS).

In comparison to the existing conventional procedure, the new approach reduces sample processing from several days to several hours per sample.

As regards the aged-residue air-dust samples, the new method shows a good accuracy, precision and high selectivity providing a performance in good agreement with the existing procedure. In SRM air-dust, the concentration of a few compounds obtained by the new method was below (10–50%) the certified value.     

Complexes of divalent nickel and copper with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde

Summary The reactions of divalent nickel and copper salts with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde, L, yield complexes of general formulae [CuL₂X₂] (X=Cl, Br, or ClO₄), [CuL(SO₄)], [CuL(SO₄)] · 4H₂O, and NiLX₂ (X=Cl, Br, or NCS).All the complexes have been characterized by elemental analyses, magnetic measurements, e.s.r. electronic and i.r. spectral studies. The results show that the Schiff base acts as bidentate ligand through the pyridine-like imine nitrogen of imidazole ring and the azomethine nitrogen. Tentative structures of the complexes are suggested.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.     

Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.