Giant magnetoimpedance in FM/SiO2/Cu/SiO2/FM films at GHz frequencies

We study the magnetic properties at high frequency of new structures of the tri-layer samples. The magnetoimpedance effect was analyzed in FM/i/Cu/i/FM sandwiched layers, where the ferromagnetic layer (FM) is, in fact, a multilayered film [F (10 nm)+Cu (1 nm)]×50 and F is the amorphous ferromagnetic alloy Fe_73.5Cu₁Nb₃Si_13.5B₉ and i is an isolating layer produced by magnetron sputtering. The effect of, both, the probe current frequency (in the range 10 MHz–1.8 GHz) and the dimensions of the magnetic and non-magnetic layers of the MI response were investigated. A comparison between samples with and without the isolating layer is discussed. MI ratios of 220% were obtained for samples at 180 MHz with a ferromagnetic and Cu width layers of 2 and 1 mm, respectively.     

On Lie Algebras in the Category of Yetter—Drinfeld Modules

The category of Yetter—Drinfeld modules over a Hopf algebra K (with bijective antipode over a field k) is a braided monoidal category. If H is a Hopf algebra in this category then the primitive elements of H do not form an ordinary Lie algebra anymore. We introduce the notion of a (generalized) Lie algebra in such that the set of primitive elements P(H) is a Lie algebra in this sense. Also the Yetter—Drinfeld module of derivations of an algebra A in is a Lie algebra. Furthermore for each Lie algebra in there is a universal enveloping algebra which turns out to be a Hopf algebra in .     

Conformational and electronic effects on the regioselectivity of the glycosylation of different anomers of N-dimethylmaleoyl-protected glucosamine acceptors

In a previous paper (Bohn et al., Carbohydr. Res., 2007, 342, 2522) the relative O3/O4 reactivities of both alpha- and beta-methyl glycosides of N-dimethylmaleoyl (DMM) glucosamine acceptors protected at O6 with three different groups were assessed by us, using two glycosyl donors. The alpha-anomers showed preferential or exclusive substitution at O3, whereas the beta-anomers gave preferential or exclusive substitution at O4. A DFT study of analogs of the reported acceptors indicates that whereas the beta-anomers carry the DMM ring parallel to the C2-H2 bond for steric reasons, the alpha-anomers tilt this ring producing a strong hydrogen bond between the H(O)3 and one of the DMM carbonyl groups. In this way, the O3 group becomes more nucleophilic and thus more reactive: both charge and Fukui functions on O3 and O4 in the model compounds support the experimental results. Surprisingly, the previously mentioned hydrogen bond is not the only driving force for the slant of the DMM group: the axial methoxyl group of the alpha-anomers also plays a role. The ease of rotation around the C2-N2 bond for DMM-protected analogs was assessed with different models. MP2 calculations using higher basis sets yield similar relative energy and charge values to those calculated using DFT.     

Upgrading of paper grade pulps to dissolving pulps by nitren extraction: yields,molecular and supramolecular structures of nitren extracted pulps

Different paper grade pulps were extracted with nitren in order to produce dissolving pulps and polymeric xylan. The yield and molecular structure of the extracted pulps were investigated by carbohydrate analysis and HPSEC combined with fluorescence labelling in order to additionally monitor the carbonyl and carboxyl group profiles of the pulps. The supramolecular structure of selected pulps were further studied by solid state ¹³C-CP/MAS-NMR and wide-angle X-ray scattering (WAXS). These supramolecular data of nitren extracted pulps were compared to samples extracted with NaOH and a conventional dissolving pulp in order to classify the properties of nitren extracted pulps. Nitren extraction results in selective xylan removal without noticeable degradation or oxidation of the cellulose fraction. The resulting dissolving pulps have high molar masses, a narrow molar mass distribution and the typical contents of carbonyl and carboxyl groups. The supramolecular structure of cellulose is less affected by nitren compared to strong NaOH, and the resultant dissolving pulps still have the cellulose I structure. All laboratories are members of the European polysaccharide network of excellence EPNOE.     

Investigation of the protonation state of novel cationic lipids designed for gene transfection

In order to be used in versatile DNA delivery systems, novel cationic lipids were synthesized. The head groups of the new compounds represented by monoamines or oligoamines can be charged or uncharged depending on the environmental pH. Since their pK values are unknown, the protonation properties of these lipids have been studied in a wide pH range. In our experiments, the amphiphilic molecules were organized as a Langmuir monolayer at the air-water interface. Total reflection X-ray fluorescence (TRXF) was used to determine the 2D concentration of bromide counterions bound to a positively charged (protonated) Langmuir monolayer. The protonation rate of the novel cationic lipids was estimated by comparing the fluorescence intensity with that of dioctadecyldimethylammonium bromide monolayers as a reference. TRXF investigations were supplemented with results of film-balance measurements, grazing incidence X-ray diffraction, and X-ray reflectivity data. The results obtained display that the monolayers of all studied compounds are completely uncharged at pH values above 10. In the investigated pH region, the highest protonation rate of the monolayers is observed at pH 3. The influence of the monolayer packing density on the protonation properties is clearly shown.     

Direct immobilization of Fab' in nanocapillaries for manipulating mass-limited samples

Interfacing nanoscale elements into a microfluidic device enables a new range of fluidic manipulations. Nanocapillary array membranes (NCAMs), consisting of thin (5 microm < d < 20 microm) membranes containing arrays of nanometer diameter (10 nm < a < 500 nm) pores, are a convenient method of interfacing vertically separated microchannels in microfluidic devices that allow the external control of analyte transport between microfluidic channels. To add functionality to these nanopores beyond simple fluid transport, here we incorporate an antibody-based molecular recognition element onto the pore surface that allows selective capture, purification, and release of specific analytes from a mixture. The pores are fabricated by electroless plating of gold into the nanopores of an NCAM (Au-NCAM). An antibody is then immobilized on the Au-NCAM via gold-thiol chemistry as a thiolated fragment of antigen-binding (Fab') prepared by direct digestion of the antibody followed by reduction of the disulfide linkage on the hinge region. The successful immobilization and biological activity of the resultant Fab' through this protocol is verified on planar gold by fluorescence microscopy, scanning electron microscopy, and atomic force microscopy. Selective capture and release of human insulin is verified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The relative mass spectral peak intensities for insulin versus nonantigenic peptides increase more than 20-fold after passing through the Fab'-Au-NCAM relative to the control Au-NCAM. The affinity-tagged Au-NCAM can be incorporated into microfluidic devices to allow the concentration, capture, and characterization of analytes in complex mixtures with high specificity.     

Absolute configuration of myrobotinol, new fused-hexacyclic alkaloid skeleton from Myrioneuron nutans

Myrobotinol (1) was isolated from the leaves of Myrioneuron nutans (Rubiaceae) and its structure determined from spectral data, including mass spectrometry and 2D NMR. This compound presents a new hexacyclic alkaloid skeleton including a 1,3-oxazine and aminal functionality. The absolute configuration of myrobotinol was established by using Mosher's method. A plausible biosynthetic pathway starting from L-lysine via Delta-piperideine was proposed for this hexacyclic alkaloid.     

Physicochemical investigation of a lipid with a new core structure for gene transfection: 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol

Cationic liposomes/DNA complexes can be used as nonviral vectors for direct delivery of DNA-based biopharmaceuticals to damaged cells and tissues. In order to obtain more effective and safer liposome-based gene transfection systems, the new cationic lipid 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol (AHHP) was synthesized. In this paper we report on the synthesis of AHHP and investigations of its physical-chemical properties. Langmuir monolayers of AHHP were studied at the air/buffer interface by film balance measurements, grazing incidence X-ray diffraction (GIXD), and infrared reflection absorption spectroscopy (IRRAS). Structure and thermotropic phase behavior of AHHP in aqueous dispersion were examined by small-angle and wide-angle X-ray scattering (SAXS/WAXS) and differential scanning calorimetry (DSC). The results show clear differences in structure and phase behavior of AHHP, both in the monolayer system and in aqueous dispersions, in dependence on the subphase pH due to protonation or deprotonation of the primary amine in the lipid head group. Thermodynamic data derived from pi-A isotherms provide information about the critical temperature (Tc), which is in rough agreement with the temperature of the lipid phase transition from gel to fluid state (Tm) found by X-ray and calorimetry studies of AHHP aqueous dispersions. The packing properties of the molecules in mono- and bilayer systems are very similar. DNA couples to the monolayer of the new lipid at low as well as at high pH but in different amounts. The DNA coupling leads to an alignment of adsorbed DNA strands indicated by the appearance of a Bragg peak. The distance between aligned DNA strands does not change much with increasing monolayer pressure.     

Endoglucanase Degradation and Enzyme-Aided Characterization of Cellulose Acetates

Endoglucanases were used as a selective tool to determine the substituent distribution along the chains of partially substituted cellulose acetates. Unsubstituted segments are intensively fragmented while highly substituted segments are only slightly degraded or not affected at all. Two different procedures were developed to perform a preparative separation of the fragments by size exclusion chromatography. One system is based on a direct separation of the fragmentation products using pyridine : water (9 : 1) as an eluent. The isolated fragments can be analysed regarding to their DS values by ATR/FTIR spectroscopy or by hydrolysis and HPLC. The second system is based on deutero-acetylation of endoglucanase fragmented samples. The complete acetylation of all OH groups enables a chromatographic separation in chloroform. Afterwards the isolated fragments can be analysed regarding to their partial DS values by ¹H-NMR spectroscopy.     

Preparation of Arabinoxylan and its Sorption on Bacterial Cellulose During Cultivation

The sorption of arabinoxylan (AX) on bacterial cellulose was investigated by adding AX to the culture medium of Gluconacetobacter xylinus. The starting AX material was produced by alkaline extraction of oat spelts. To investigate the impact of varying AX quality, the residual lignin was reduced by ClO₂ bleaching. Furthermore, bleached and unbleached xylans were subjected to xylanase hydrolysis in order to produce fractions of varying molar mass. Of all samples only the water soluble fractions were used for sorption experiments. A reduced molar mass resulted in a lower sorption of AX to the cellulose, while the lignin content increased the sorption of AX on bacterial cellulose. The sorption of AX resulted in a reduction of bacterial cellulose crystallinity and cellulose Iα content. In combined treatments of AX with xyloglucan and β-glucan no synergistic effect of those polysaccharides on the AX sorption was found.