中温固体氧化物燃料电池的基本性质测量

介绍了固体氧化物燃料电池的工作原理,测量了中温薄膜固体氧化物燃料电池的开路电压、放电曲线及功率曲线,并分析了电池内阻随电流密度的变化.     

基于动态溶胀法制备中空聚合物微球

以表面带正电荷的m级聚苯乙烯微球为种子,经过甲苯、二乙烯基苯溶胀,聚合与包覆等过程制备了直径约5 m的中空聚合物微球。研究了溶剂类型、溶剂用量对动态溶胀法制备的中空聚合物微球粒径、分布和结构的影响,讨论了中空聚合物微球的形成机理。结果表明:添加一定量甲苯、二甲苯等挥发性溶剂是动态溶胀法形成中空聚合物微球的前提;甲苯用量越多,溶胀后形成的中空结构越明显,孔径越大;选择低溶解性的二甲苯溶剂更有利于中空结构的形成。     

菱形纤芯光子晶体光纤色散与双折射特性分析

针对光子晶体光纤多零色散点、高双折射的应用要求, 设计了一种新型结构的光子晶体光纤, 其纤芯由位于菱形四个角上的圆形空气孔组成. 通过有限元数值分析方法对该种结构光子晶体光纤的色散特性和双折射特性进行数值仿真, 得到色散与波长、色散与纤芯圆孔尺寸、双折射与波长、双折射与纤芯圆孔尺寸的关系. 研究结果表明:在满足光纤传输功率要求的条件下, 光纤的双折射在d₁<0.8 μupm 时的性能较好. 同时, 该种结构的光子晶体光纤在芯区直径满足d₁=0.4 μupm或 d     

High-power ultraviolet 278 nm laser from fourth-harmonic generation of a Nd:YAG laser in CsB3O5

We demonstrate a high-power UV 278 nm laser by fourth-harmonic generation (FHG) of a 1112 nm Nd:YAG laser in a nonlinear optical (NLO) crystal CsB3O5 (CBO) for the first time, to our best knowledge. A 30 W level diode-pumped Q-switched Nd:YAG laser at 1112 nm with beam quality factor M2=1.2 was used as the fundamental light source at a pulse width of 500 ns. With an LiB3O5 crystal, the 1112 nm laser was first frequency-doubled to 556 nm with an average output power of 13.5 W. It was then frequency doubled again in a CBO crystal to obtain the FHG output at 278 nm. The maximum average output power of the 278 nm laser is up to 1.5 W. The results demonstrated that CBO crystal is a promising NLO material for UV high-power lasers below 300 nm.     

Shadow effects in simulated ultrasound images derived from computed tomography images using a focused beam tracing model

Simulation of ultrasound images based on computed tomography (CT) data has previously been performed with different approaches. Shadow effects are normally pronounced in ultrasound images, so they should be included in the simulation. In this study, a method to capture the shadow effects has been developed, which makes the simulated ultrasound images appear more realistic. The method using a focused beam tracing model gives diffuse shadows that are similar to the ones observed in measurements on real objects. Ultrasound images of a cod (Gadus morhua) were obtained with a BK Medical 2202 ProFocus ultrasound scanner (BK Medical, Herlev, Denmark) equipped with a dedicated research interface giving access to beamformed radio frequency data. CT images were obtained with an Aquilion ONE Toshiba CT scanner (Toshiba Medical Systems Corp., Tochigi, Japan). CT data were mapped from Hounsfield units to backscatter strength, attenuation coefficients, and characteristic acoustic impedance. The focused beam tracing model was used to create maps of the transmission coefficient and scattering strength maps. Field II was then used to simulate an ultrasound image of 38.9 × 55.3 × 4.5 mm, using 10(6) point scatterers. As there is no quantitative method to assess quality of a simulated ultrasound image compared to a measured one, visual inspection was used for evaluation.     

利用互易性电路设计降低超声流量测量的零点误差和温度漂移

超声流量测量系统中,严重影响时间差检测的准确度和稳定性的“零点误差”和“温度漂移”问题可以通过对测量系统互易性的改善加以改进。本文通过对测量系统等效电路模型的分析阐述了系统互易的成立条件,并提出了一种通过对激励和接收电路等效阻抗进行对称性设计提高测量系统互易性的测量电路。这一电路设计易于在仪表中实现,其中换能器的负载阻抗能够根据需要灵活设定。在实际测量管道上进行的实验证明,使用这样的电路设计进行流量测量,能够大幅降低零点误差并抑制温度漂移,使得流量测量结果更加准确稳定。     

Optical planar waveguides in Yb³⁺-doped phosphate glasses produced by He⁺ ion implantation

Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers.     

铜铟镓硒太阳能电池多层膜的结构分析

对于溅射后硒化和共蒸发等方法制备的铜铟镓硒（CIGS）太阳能电池薄膜,利用多种分析方法研究了CIGS多层膜的复杂结构等．研究表明：卢瑟福背散射（RBS）在分析CIGS多层膜方面具有其独特优势和可靠的结果;溅射后硒化方法制备的CIGS薄膜中,Ga和In在CIGS薄膜中呈梯度分布,这种Ga表层少而内层多的不均匀分布与Mo层没有必然关系;RBS和俄歇电子能谱分析（AES）均显示CIGS太阳能电池器件多层膜界面处存在扩散,尤其是CdS与CIGS,Mo与CIGS的界面处;X射线荧光（XRF）结果表明,电池效率最高的CIGS层中In,Ga比例为In：Ga=0．7：0.3;X射线衍射（XRD）结果显示：退火后的CIGS／Mo薄膜结晶品质得到了优化．     

土壤源热泵系统冷凝热回收的优化研究

文中提出了一种土壤源热泵冷凝热回收系统,能够减少冬夏两季土壤源热泵系统从土壤冷热源排放吸收热量不均对土壤温度场所造成的影响,并结合火用平衡方程建立了土壤源热泵系统冷凝热回收的优化模型。基于此模型,探讨了系统冷凝器和地下埋管的优化配置,通过模拟计算对该系统在制冷工况下改进前后的运行情况进行了分析对比,结果显示土壤源冷凝热回收系统应用于实际工程能够提高整个系统的COP以及火用效率。     

Capacitance of Organic Schottky Diodes Based on Copper Phthalocyanine （CuPc）

The capacitance of an organic Schottky diode based on copper phthalocyanine （CuPc） is investigated. Based on the organic small-signal equivalent model established, we calculate the reverse capacitance CMetal Of the organic Schottky diode with different kinds of metal cathodes （Mg, Al, Au）. It is found that the reverse capacitance of the organic Schottky diode shows behavior as CMg 〉 CAl 〉 CAu at the same frequency, and according to our analysis, the reverse Schottky junction capacitance Cj is expected to have little effect on the reverse capacitance of the organic Schottky diode, and the space-charge limited current capacitance Us is considered to dominate the reverse capacitance, which limits the improvement of frequency characteristics of organic Schottky diodes.