Double perovskite oxides Sr_2Mg_(1-x)Fe_xMoO(6-δ) for catalytic oxidation of methane

The double perovskite oxides Sr2Mg1-xF exMoO6-δ were investigated as catalysts for the methane oxidation.The structural properties of catalysts were characterized in detail by X-ray diffraction,X-ray photoelectron spectroscopy and X-ray absorption spectroscopy.The catalytic property was strongly influenced by the Fe substitution.The relation between catalytic performance and the degree of Fe substitution was examined with regard to the structure and surface characteristics of the mixed oxides.The Fe-containing catalysts exhibited higher activity attributable to the possible(Fe2+,Mo6+) and (Fe3+,Mo5+)valency pairs,and the highest activity was observed for Sr2Mg0.2Fe0.8MoO6-δ.The enhancement of the catalytic activity may be correlated with the Fe-relating surface lattice oxygen species and was discussed in view of the presence of oxygen vacancies.     

Chromo-chemodosimetric detection for Fe2+ by Fenton reagent-induced chromophore-decolorizing of halogenated phenolsulfonphthalein derivatives

A commercially-available sulfonphthalein derivative was demonstrated to be a chemodosimeter for Fe²⁺ and its sensing behavior was further investigated by UV-vis spectroscopy in aqueous media under the optimum conditions. In the presence of chlorophenol red (CPR) and H₂O₂, the absorption maximum at 435 nm decreased upon addition of Fe²⁺, resulting in a significant color change of the CPR solution from yellow to colorless. The chemosensor system did not show significant responses to a series of other metal ions including Al³⁺, Zn²⁺, Cd²⁺, Hg²⁺, Mn²⁺, Co²⁺, Fe³⁺, Ni²⁺, Cu²⁺, La³⁺, Ce⁴⁺, Th⁴⁺, Pd²⁺, Pb²⁺, Sb³⁺, Cr³⁺, Au³⁺, Ag⁺, Nd³⁺, Sm³⁺, alkali and alkaline earth metal cations, allowing for highly selective naked-eye detection of Fe²⁺. Quantitative analysis was carried out kinetically for practicable the Fe²⁺ assay when either fixed time method or the initial rate method was applied. When the detecting time was set, the decrease of absorbance signal was linear with Fe²⁺ concentration in the range of 0 to 7.50 × 10^?5 mol L^?1 and the regression equation was ΔA = 0.00759 + 0.00593C _Fe with a correlation coefficient r = 0.9953. The chemodosimetric system has employed an irreversible Fenton reagent-promoted oxidation of the CPR free chromophore and the hydroxyl radicals were generated in the presence of both Fe²⁺ and hydrogen peroxide. The mechanistic interpretation of the signaling process was partially confirmed by the radical scavenging experiment and the FT-IR analysis of the intermediates formed at different reaction periods.     

中温固体氧化物燃料电池LaNi0.6Fe0.4O3-δ阴极材料的制备及性能表征

以硝酸镧、硝酸镍和硝酸铁为原料,柠檬酸作燃料低温燃烧合成固体氧化物燃料电池阴极材料LaNi0.6Fe0.4O3-δ.X射线衍射（XRD）图谱显示,600℃煅烧可形成单一的LaNi0.6 Fe0.4 O3-δ钙钛矿相.电子显微镜（TEM和SEM）照片看出,其颗粒尺寸〈100 nm.电池交流阻抗谱图表明,在1050℃烧结制...     

仪器定量分析中几个问题的探讨

详细介绍了分析方法的评价指标,包括检出限、测定限、灵敏度、精密度、准确度、动态范围和线性范围、抗干扰能力等,单因素优化方法与加标回收实验评定测定结果准确度的可靠性,并就分析工作中遇到的一些实际问题进行了讨论.     

泽泻醇类化合物与血清白蛋白相互作用的分子机理研究

中药泽泻具有抗肿瘤作用,可能与血清中蛋白成分的改变有关.利用荧光光谱、圆二色谱结合分子模拟技术研究了模拟生理条件下泽泻有效成分泽泻醇类化合物与人血清白蛋白的相互作用.实验结果表明,23-乙酰泽泻醇B与蛋白的结合作用远强于24-乙酰泽泻醇A.分子模拟结果与实验一致,并且表明,结合强弱的差异与小分子的侧链结构有关.该结果可...     

EDTA滴定法测定钢渣中游离氧化镁

以碘-乙醇溶液为催化剂,选择乙二醇作溶剂浸取钢渣中游离氧化镁,采用EDTA滴定法测定其中游离氧化镁的含量。试验中考察了碘-乙醇的最佳用量和K-B混合指示剂的最合适配比。结果表明:催化剂碘-乙醇溶液的添加量达碘与氧化镁的质量比为7.5比1,指示剂中酸性铬蓝K和萘酚绿B的比值为1比1.4时,滴定终点变色明显,滴定结果准确。在钢渣中加入纯氧化镁测定的平均回收率为96.5%,相对标准偏差(n=5)为1.3%。     

吹扫捕集-气相色谱-质谱法同时分析饮用水源水中9种氯苯系化合物

建立了饮用水源水中氯苯、二氯苯、三氯苯和四氯苯等共9种氯苯系化合物同时测定的吹扫捕集-气相色谱-质谱法(P&T-GC- MS).优化了吹扫捕集时间及解析时间,采用质谱的选择离子监测模式和内标定量法进行定量分析.在优化的吹扫捕集条件下,线性回归方程的相关系数均大于0.999 8;氯苯、二氯苯、三氯苯和四氯苯的方法检出限(...     

几种纤锌矿相半金属铁磁体磁学性能的第一原理研究

通过基于密度泛函理论的第一原理计算,优化了纤锌矿结构的化合物TmZn15S16(Tm=V,Cr,Mn)的几何结构,并研究了它们的磁学性能.结果表明:TmZn15S16均为典型的半金属铁磁体,它们的超胞磁矩分别为3.0099μB,3.9977μB和5.0092μB;这些磁矩主要来源于被掺入的过渡元素;CrZn15S16的半金属特性比VZn15S16和MnZn15S16更稳定;这些半金属铁磁体的半金属带隙均比较宽,表明它们可能具有较高的居里温度;TmZn15S16中杂质过渡离子的电子结构分别为V:eg2↑t12g↑,Cr:eg2↑t22g↑和Mn:eg2↑t32g↑.     

Monitoring and analytics of semivolatile organic compounds (SVOCs) in indoor air

This paper reviews literature information on the behaviour of semivolatile organic compounds (SVOCs) in the indoor environment, as well as the most likely emission sources. The consecutive stages of analytical procedures used for monitoring SVOCs in indoor environments are described. The most common approaches used for collecting samples from the gas and particulate phases are mentioned. The paper discusses and compares various types of sorbents and filters applied in dynamic, passive and denudational techniques, as well as the techniques used to liberate the SVOCs, including Soxhlet, sonication and microwave extraction. The main advantages and disadvantages of each technique are discussed, together with possible future trends. The approaches commonly used during the final determination step, such as gas chromatography and liquid chromatography, are presented together with their possible drawbacks, and ways of eliminating them are suggested. The review makes brief reference to the effects of human exposure to SVOCs in house dust and discusses the main aspects of the analytical procedures used to monitor the presence of SVOCs in this medium.