乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Synthesis of Functionalized o‐, m‐, and p‐Terphenyl Derivatives by Consecutive Cross‐Coupling Reactions of Triazene‐Substituted Arylboronic Esters

Triazene‐substituted arylboronic esters were prepared readily from the corresponding aryl magnesium derivatives and shown to function as a new class of donor–acceptor‐substituted coupling reagents. The selective functionalization of these aromatic derivatives led to a wide variety of terphenyl derivatives in which the original bifunctional unit (often further substituted with another functional group) formed the central aromatic ring. The functionalized terphenyl derivatives were formed in two efficient cross‐coupling steps from the triazene‐substituted boronic esters: Suzuki cross‐coupling with an aryl halide was followed by BF₃?OEt₂‐induced palladium‐catalyzed coupling of the diazonium salt generated in situ from the triazene with an arylboronic acid.     

Magnetic diphase nanostructure of ZnFe2O4/γ-Fe2O3

Magnetic diphase nanostructures of ZnFe₂O₄/γ-Fe₂O₃ were synthesized by a solvothermal method. The formation reactions were optimized by tuning the initial molar ratios of Fe/Zn. All samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, and Raman spectra. It is found that when the initial molar ratio of Fe/Zn is larger than 2, a diphase magnetic nanostructure of ZnFe₂O₄/γ-Fe₂O₃ was formed, in which the presence of ZnFe₂O₄ enhanced the thermal stability of γ-Fe₂O₃. Further increasing the initial molar ratio of Fe/Zn larger than 6 destabilized the diphase nanostructure and yielded traces of secondary phase α-Fe₂O₃. The grain surfaces of diphase nanostructure exhibited a spin-glass-like structure. At room temperature, all diphase nanostructures are superparamagnetic with saturation magnetization being increased with γ-Fe₂O₃ content.     

Determination of trace metals by ICP-OES in plant materials after preconcentration of 1,10-phenanthroline complexes on activated carbon

In this work, 1,10-phenanthroline was used as a complexing agent for the separation and preconcentration of Cd(II), Co(II), Ni(II), Cu(II) and Pb(II) on activated carbon. The metals were adsorbed on activated carbon by two methods: static (1) and dynamic (2). The optimal condition for separation and quantitative preconcentration of metal ions with activated carbon for the proposed methods was for (1) in the static methods in the pH range 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (92.6%), Co(II) (95.6%), Pb(II) (91.0%), and with 3 mol dm⁻³ HNO₃ for Cd(II) (95.4%), Pb(II) (100.2%). The preconcentration factor was 100 with R.S.D. values between 1.0 and 2.9%. For (2), the dynamic method (SPE), the pH range for the quantitative sorption was 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (100.6%), Pb(II) (94.4%), and reasonably high recovery for Co(II) (83%), Cu(II) (88%). The optimum flow rate of metal ions solution for quantitative sorption of metals with 1,10-phenanthroline was 1-2 cm³ min⁻¹ whereas for desorption it was 1 cm³ min⁻¹. The preconcentration factor was 50 for all the ions of the metals with R.S.D. values between 2.9 and 9.8%.The samples of the activated carbon with the adsorbed trace metals can be determined by ICP-OES after mineralization by means of a high-pressure microwave mineralizer. The proposed method provides recovery for Cd (100.8%), Co (97.2%), Cu (94.6%), Ni (99.6%) and Pb (100.0%) with R.S.D. values between 1.2 and 3.2%.The preconcentration procedure showed a linear calibration curve within the concentration range 0.1-1.5 μg cm⁻³. The limits of detection values (defined as “blank + 3s” where s is standard deviation of the blank determination) are 5.8, 70.8, 6.7, 24.6, and 10.8 μg dm⁻³ for Cd(II), Pb(II), Co(II), Ni(II) and Cu(II), respectively, and corresponding limit of quantification (blank + 10s) values were 13.5, 151.3, 20.0, 58.9 and 33.2 μg dm⁻³, respectively.As a result, these simple methods were applied for the determination of the above-mentioned metals in reference materials and in samples of plant material.     

Electroanalytical Study of the Composition of the Raw Pigment Mixtures that Yield the Metallic Lustre on Ceramics. A Link Between Composition and Final Result

Voltammetry of immobilized microparticles was used to study the electrochemistry of the raw pigments that produce the metallic lustre on ceramics after a successful firing. To study this influence of the mixture components on the reduction properties to achieve the metallic lustre, 14 mixtures of illitic clay, Fe₂O₃, HgS, CuO and AgNO₃ were prepared and studied in different media. Iron oxide improves the yield of the reduction of the metals and cinnabar helps a closer reduction of silver to copper reduction and prevents the Ag? Cu alloying because of the formation of silver–mercury adducts. The presence of one of the metals influences the peak position of the other metal. The use of vinegar as diluting agent is not casual, because in this media the reduction of silver takes place at a potential closer to the copper. This electroanalytical technique allowed to distinguish between powders of different composition and offered some information about the role of the components in the reduction of copper and silver and the selection of vinegar to prepare the raw pigment suspensions.     

Semiempirical Molecular Orbital Studies of the Acylation Step in the Lipase‐Catalyzed Ester Hydrolysis

In this study, we present the results from the semiempirical molecular orbital calculations for the acylation step in the lipase‐catalyzed ester hydrolysis. The results reveal that the lowest energy path for the formation of the tetrahedral intermediate is for the serine residue of the catalytic triad to attack the substrate, followed by coupling heavy atom movement and proton transfer. The calculations of four active site models show that the cooperation of the aspartate group and the oxyanion hole is capable of lowering the activation energy by about 16 kcalmol^?1. Our results further suggest that the lipase‐catalyzed ester hydrolysis adopts the single proton transfer mechanism.     

Theoretical Study of Weakly Bound Dimers between Hydrogen Fluoride and Some Polar Molecules

Weakly bound linear and bent dimers, FH—X (where X = CO, OC, CNH, NCH, N₂O and ON₂), are investigated using the DFT B3LYP and ab initio MP2 methods with the same basis sets (6–311++G(3df,2pd)). The strengths of the H—C or H—N H‐bonds in dimers FH—CO, FH—CNH, and FH—N₂O are compared with those of the H—O or H—N H‐bonds in dimers FH—OC, FH—NCH, and FH—ON₂. The results obtained for the H‐bond distances, the elongation effect of the HF bond, the red shift of the HF stretching frequency, and the energy difference between the dimer and the charge transfer reveal that the H‐bonds of the first group of dimers are stronger than those of the second. The Gibbs energies calculated for the six dimer formations indicate that the weakly bound dimers are unstable at room temperature (T = 298 K) (FH—X's → FH + X's, ΔG < 0).     

Syntheses,Characterization and Crystal Structures of Three Structurally Similar Dinuclear Schiff Base Cadmium(II) Complexes with Bridging Azide or Thiocyanate Ligands

Three novel Schiff base cadmium(II) complexes, derived from the end‐on (μ‐1,1‐N₃) azide or end‐to‐end (μ‐1,3‐NCS) thio cyanate bridges and similar tridentate Schiff base ligands, have been synthesized under similar synthetic procedures and their crystal structures determined by X‐ray diffraction methods. They are the dinuclear double end‐on azide‐bridged [Cd₂(L1)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 1 ), the dinuclear double end‐on azide‐bridged [Cd₂(L2)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 2 ), and the dinuclear double end‐to‐end thiocyanate‐bridged [Cd₂(L3)₂(NCS)₂(μ_1,3‐NCS)₂] ( 3 ), where L1, L2 and L3 are three similar tridentate Schiff bases obtained by condensation of 2‐pyridylaldehyde with N,N‐diethylethane‐1,2‐diamine, of 2‐pyridylaldehyde with N‐isopropylethane‐1,2‐diamine, and of 2‐pyridylaldehyde with N,N‐dimethylpropane‐1,3‐diamine, respectively. Each cadmium(II) centre in the complexes is in a distorted octahedral coordination. There is a crystallographic inversion centre in each of the complexes. The similar small ligands used as the secondary ligands in the preparation of the cadmium(II) complexes with similar Schiff bases can result in similar structures.     

Understanding effect of wall structure on the hydrothermal stability of mesostructured silica SBA-15

Mesostructured silica SBA-15 materials with different structural parameters, such as pore size, pore volume, and wall thickness, etc., were prepared by varying the postsynthesis hydrothermal treatment temperature and adding inorganic salts. The hydrothermal stabilities of these materials in steam (100% water vapor) were systematically investigated using a variety of techniques including powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and (29)Si solid-state NMR. The effect of the pore size, microporosity or mesoporosity, and wall thickness on the stability was discussed. The results show that all of the SBA-15 materials have a good hydrothermal stability under steam of 600 degrees C for at least 24 h. N(2) sorption measurements show that the Brumauer-Emmett-Teller surface area of SBA-15 materials is decreased by about 62% after treatment under steam at 600 degrees C for 24 h. The materials with thicker walls and more micropores show relatively better hydrothermal stability in steam of 600 degrees C. Interestingly, we found that the microporosity of the mesostructured silica SBA-15 is a very important factor for the hydrothermal stability. To the materials with more micropores, the recombination of Si-O-Si bonds during the high-temperature steam treatment may not cause direct destruction to the wall structure. As a result, SBA-15 materials with more micropores show better stability in pure steam of 600 degrees C. Nevertheless, these materials are easily destroyed in steam of 800 degrees C for 6 h. Two methods to effectively improve the hydrothermal stability are introduced here: one is a high-temperature treatment, and another is a carbon-propping thermal treatment. Thermal treatment at 900 degrees C can enhance the polymerization degree of Si-O-Si bonds and effectively improve the hydrothermal stability of these SBA-15 materials in 800 degrees C steam for 12 h. But, this approach will cause very serious shrinkage of the mesopores, resulting in smaller pore diameter and low surface area. A carbon-propping thermal treating method was employed to enhance the polymerization of Si-O-Si bonds and minimize the serious shrinkage of mesopores at the same time. It was demonstrated to be an effective method that can greatly improve the hydrothermal stability of SBA-15 materials in 800 degrees C steam for 12 h. Furthermore, the SBA-15 materials obtained by using the carbon-propping method possess larger pores and higher surface area after the steam treatment at 800 degrees C compared to the materials from the direct thermal treatment method after the steam treatment.     

Mild and Efficient Deprotection of 1,3‐Dithianes with N,N′‐ Diiodo‐N,N′‐1,2‐Ethanediyl‐Bis(p‐Toluenesulphonamide)

Aliphatic and aromatic 1,3‐dithiane are oxidized to the corresponding carbonyl compounds in good yields under mild conditions by N,N′‐diiodo‐N,N′‐1,2‐ethanediyl‐bis(p‐toluenesulphonamide) [NIBTS] and silver nitrate.