A high-frequency and high-field EPR study of new azide and fluoride mononuclear Mn(III) complexes

The isolation, structural characterization and electronic properties of three new six-coordinated Mn(III) complexes, [Mn(bpea)(F)(3)] (1), [Mn(bpea)(N(3))(3)] (2), and [Mn(terpy)(F)(3)] (3) are reported (bpea = N,N-bis(2-pyridylmethyl)-ethylamine; terpy = 2,2':6',2' '-terpyridine). As for [Mn(terpy)(N(3))(3)] (4) (previously described by Limburg J.; Vrettos J. S.; Crabtree R. H.; Brudvig G. W.; de Paula J. C.; Hassan A.; Barra A-L.; Duboc-Toia C.; Collomb M-N. Inorg. Chem. 2001, 40, 1698), all these complexes exhibit a Jahn-Teller distortion of the octahedron characteristic of high-spin Mn(III) (S = 2). The analysis of the crystallographic data shows an elongation along the tetragonal axis of the octahedron for complexes 1 and 3, while complex 2 presents an unexpected compression. The electronic properties were investigated using a high-field and high-frequency EPR study performed between 5 and 15 K (190-575 GHz). The spin Hamiltonian parameters determined in solid state are in agreement with the geometry of the complexes observed in the crystal structures. A negative D value found for 1 and 3 is related to the elongated tetragonal distortion, whereas the positive D value determined for 2 is in accordance with a compressed octahedron. The high E/D values, in the range of 0.103 to 0.230 for all complexes, are correlated with the highly distorted geometry present around the Mn(III) ion. HF-EPR experiments were also performed on complex 1 in solution and show that the D value is the only spin Hamiltonian parameter which is slightly modified compared to the solid state (D = -3.67 cm(-1) in solid state; D = -3.95 cm(-1) in solution).     

Tailor-made functionalization of silicon nitride surfaces

This communication presents the first functionalization of a hydrogen-terminated silicon-rich silicon nitride (Si3Nx) surface with a well-defined, covalently attached organic monolayer. Properties of the resulting monolayers are monitored by measurement of the static water contact angle, X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRRAS). Further functionalization was performed by reaction of Si3Nx with a trifluoroethanol ester alkene (CH2=CH-(CH2)8CO2CH2CF3) followed by basic hydrolysis to afford the corresponding carboxylic acid-terminated monolayer with hydrophilic properties. These results show that Si3Nx can be functionalized with a tailor-made organic monolayer, has highly tunable wetting properties, and displays significant potential for further functionalization.     

Modification of ion-exchange membrane used for separation of protons and metallic cations and characterization of the membrane by current-voltage curves

The ionic transport properties of several cations (H(+), Na(+), and Zn(2+)) across sulfonated ion-exchange membranes modified with an amine were investigated by the measurement of current-voltage curves to determine the effect of the surface modification of the membrane. The membrane was modified by chlorosulfonation and amination with a diamine (N,N-dimethylethylenediamine) and an amine (isoamylamine) to form a sulfonamide bond between amine groups and the surface layer. In the case of the modification with the diamine, the terminal amine was protonated in acidic media or quaternized with methyl iodide. The presence of a positively charged layer on the two sides of the membrane strongly decreased the limiting current flowing across the membrane in the presence of a 1:1 electrolyte such as HCl or HNO(3) due to an increase of the resistance of the membrane. In the case of divalent cations such as Na(+) and Zn(2+), electrostatic repulsion also contributes to the decrease of the limiting current. The presence of divalent anions seems to increase the limiting current somewhat due to their preconcentration within the cationic layer, which facilitates their subsequent transport across the membrane. When only one face of the membrane was modified, the current-voltage measurements showed that the membrane did not behave like a bipolar membrane. For one-side (under forward polarization) and two-side modified membranes, counterions are slightly blocked in the membrane by the cationic layer, which led to a decrease of the membrane conductivity during electrodialysis.     

Semiautomatic and automatic catalytic amperometric and catalytic constant-current potentiometric titrations of gold(III)

Semiautomatic and automatic amperometry and constant-current potentiometry were used to follow the course of catalytic titration of gold(III) with potassium iodide. The Ce(IV)-As(III) system in the presence of sulfuric acid was used as the indicator reaction. The possibilities of the application of two types of graphite electrodes were investigated. The effect of concentration of the indicator reaction components, and the presence of organic solvents and acids on the shape of the catalytic titration curves was studied. Amounts of 80–900 μg of gold(III) were determined with a relative standard deviation less than 1.1%. The results obtained are in good agreement with those of comparable methods.     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.     

A preliminary 3D model for cytochrome P450 2D6 constructed by homology model building

Summary A homology model building study of cytochrome P450 2D6 has been carried out based on the crystal structure of cytochrome P450 101. The primary sequences of P450 101 and P450 2D6 were aligned by making use of an automated alignment procedure. This alignment was adjusted manually by matching -helices (C, D, G, I, J, K and L) and -sheets (3/4) of P450 101 that are proposed to be conserved in membrane-bound P450s (Ouzounis and Melvin [Eur. J. Biochem., 198 (1991) 307]) to the corresponding regions in the primary amino acid sequence of P450 2D6. Furthermore, -helices B, B and F were found to be conserved in P450 2D6. No significant homology between the remaining regions of P450 101 and P450 2D6 could be found and these regions were therefore deleted. A 3D model of P450 2D6 was constructed by copying the coordinates of the residues from the crystal structure of P450 101 to the corresponding residues in P450 2D6. The regions without a significant homology with P450 101 were not incorporated into the model. After energy-minimization of the resulting 3D model of P450 2D6, possible active site residues were identified by fitting the substrates debrisoquine and dextrometorphan into the proposed active site. Both substrates could be positioned into a planar pocket near the heme region formed by residues Val³⁷⁰, Pro³⁷¹, Leu³⁷², Trp³¹⁶, and part of the oxygen binding site of P450 2D6. Furthermore, the carboxylate group of either Asp¹⁰⁰ or Asp³⁰¹ was identified as a possible candidate for the proposed interaction with basic nitrogen atom(s) of the substrates. These findings are in accordance with a recently published predictive model for substrates of P450 2D6 [Koymans et al., Chem. Res. Toxicol., 5 (1992) 211].     

Kinetics of reaction of alkynes with some cobalt carbonyls

Pt(CO)₂Cl₂ reacts in benzene, toluene or tetrahydrofuran with 3-hexyne to give carbonylplatinumbis[di-μ-chloro,chloro(tetraethylcyclobutadiene)platinum](I), bis[dichloro(tetraethylcyclopentadienone)platinum] (III), dichloro-(tetraethyl-p-benzoquinone)platinum (IV) and dichloro(tetraethylcyclobutadiene)platinum (II). This last compound is also obtained by treating I with 1 to 3 moles of triphenylphosphine or p-toluidine. p ]The structure and reactions of III are discussed; the anion exchange reaction gives the iodo-analogue, while treatment with donor ligands gives adducts of formula [(C₂H₅)₄C₄CO]PtCl₂L(L = triphenylphosphine, p-toluidine, benzylamine and pyridine) and [(C₂H₅)₄C₄CO]PtCl₂L₂(L = benzylamine, 3-methylpyridine). p ]2-Butyne reacts with dichlorodicarbonylplatinum to give the methyl analogous of compounds I–III.     

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested—methanol, ethyl acetate and a mixture of methanol and ethyl acetate—and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegatables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1–2 ng (Sn) g^–1 to be reached. These are higher than those obtained by SLE (0.1–1 ng (Sn) g^–1). Although the repeatability is similar for both PSE and SLE (2–12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2–12 h for SLE).     

Thermal properties of solid nickel(II) coordination compounds

The paper deals with the chemical and physical factors influencing the stoichiometry of thermal decomposition of solid coordination compounds. Nickel(II) coordination compounds were used as examples: the problem of the relationship between the structure of the initial compound (and of its intermediates) and the stoichiometry of thermal decomposition is discussed; experimental conditions are shown to affect this decomposition, and the conceptions of the apparent and real stoichiometries of thermal decomposition are discussed. The results obtained may have a more general meaning.

---

Zusammenfassung Der Beitrag befa\t sich mit den chemischen und physikalischen Faktoren, welche die Stöchiometrie der thermischen Zersetzung fester Koordinationsverbindungen beeinflussen. Koordinationsverbindungen von Nickel(II) wurden als Beispiel eingesetzt; das Problem des Zusammenhanges zwischen Struktur der Ausgangsverbindung (und seiner IntermediÄrprodukte) und der Stöchiometrie der thermischen Zersetzung wird erörtert; die die Zersetzung beeinflussenden Versuchsbedingungen werden gezeigt und das Konzept der sogenannten scheinbaren und tatsÄchlichen Stöchiometrie der thermischen Zersetzung wird beschrieben. Die erhaltenen Ergebnisse dürften von allgemeinerer Bedeutung sein.

---

Résumé L'article considère les facteurs chimiques et physiques qui influencent la stchiométrie des réactions de décomposition thermique des composés de coordination solides. Les composés de coordination du nickel(II) ont été choisis pour illustrer le problème des relations entre la structure du composé initial (et de ses intermédiaires) et la stchiométrie de la réaction de décomposition thermique. On montre que les conditions expérimentales influencent la décomposition et on discute le principe des réactions stchiométriques de décomposition thermique dites «apparentes» et «réelles». Les résultats obtenus sont probablement de portée plus générale.

---

, . $ (II) $ ( ) $ . , $ , $ . .

---

---

Reported at the 7th Seminar on Modern Methods in Inorganic Chemistry. Harmonia-Bratislava, 1977.     

Oxidation of heme to beta- and delta-biliverdin by Pseudomonas aeruginosa heme oxygenase as a consequence of an unusual seating of the heme

The origin of the unusual regioselectivity of heme oxygenation, i.e. the oxidation of heme to delta-biliverdin (70%) and beta-biliverdin (30%), that is exhibited by heme oxygenase from Pseudomonas aeruginosa (pa-HO) has been studied by (1)H NMR, (13)C NMR, and resonance Raman spectroscopies. Whereas resonance Raman indicates that the heme-iron ligation in pa-HO is homologous to that observed in previously studied alpha-hydroxylating heme oxygenases, the NMR spectroscopic studies suggest that the heme in this enzyme is seated in a manner that is distinct from that observed for all other alpha-hydroxylating heme oxygenase enzymes for which a structure is known. In pa-HO, the heme is rotated in-plane approximately 110 degrees, so the delta-meso-carbon of the major orientational isomer is located within the HO-fold in the place where the alpha-hydroxylating enzymes typically place the alpha-meso-carbon. The unusual heme seating displayed by pa-HO places the heme propionates so that these groups point in the direction of the solvent-exposed heme edge and appears to originate in large part from the absence of stabilizing interactions between the polypeptide and the heme propionates, which are typically found in alpha-hydroxylating heme oxygenase enzymes. These interactions typically involve Lys-16 and Tyr-112, in Neisseriae meningitidis HO, and Lys-16 and Tyr-134, in human and rat HO-1. The corresponding residues in pa-HO are Asn-19 and Phe-117, respectively. In agreement with this hypothesis, we found that the Asn-19 Lys/Phe-117 Tyr double mutant of pa-HO exists as a mixture of molecules exhibiting two distinct heme seatings; one seating is identical to that exhibited by wild-type pa-HO, whereas the alternative seating is very similar to that typical of alpha-hydroxylating heme oxygenase enzymes and is related to the wild-type seating by approximately 110 degrees in-plane rotation of the heme. Furthermore, each of these heme seatings in the pa-HO double mutant gives rise to a subset of two heme isomeric orientations that are related to each other by 180 degrees rotation about the alpha-gamma-meso-axis. The coexistence of these molecules in solution, in the proportions suggested by the corresponding area under the peaks in the (1)H NMR spectrum, explains the unusual regioselectivity of heme oxygenation observed with the double mutant, which we found produces alpha- (55%), delta- (35%), and beta-biliverdin (10%). Alpha-biliverdin is obtained by oxidation of the heme seated similar to that of alpha-hydroxylating enzymes, whereas beta- and delta-biliverdin are formed from the oxidation of heme seated as in wild-type pa-HO.