Surfactant boundary lubricant film modified by an amphiphilic diblock copolymer

The effect of the uptake of a low-molecular-weight amphiphilic diblock copolymer on the morphology of didodecyldimethylammonium bromide (DDAB) adsorbed layers on mica, the interactions between two coated surfaces, and the frictional properties of the boundary film have been studied using an atomic force microscope and a dynamic surface forces apparatus nanotribometer. When DDAB-coated surfaces in aqueous solution were compressed, hemifusion or removal of the adsorbed surfactant bilayers could not be induced, and no frictional force could be measured between the surfaces, which display superior lateral cohesion and lubricant properties. Coadsorbing octadecyl end modified poly(ethylene oxide) chains at low density facilitates hemifusion, generating significant shear stress and leading to stick-slip instabilities. The mixed films regain their lateral cohesion at higher adsorbed copolymer densities, but an extra short-range attraction brings the adsorbed layers into adhesive contact without causing bilayer hemifusion. Here, noticeable frictional forces are also measured.     

Analysis of buprenorphine and its N-dealkylated metabolite in plasma and urine by selected-ion monitoring

A selected-ion monitoring method was developed for determination of buprenorphine and its N-dealkylated metabolite (norbuprenorphine) in human plasma and urine. N-Propylnorbuprenorphine was added as internal standard to 2-3 ml of sample and the alkaloids were extracted with toluene-2 butanol at pH 9.4. After back-extraction in dilute sulphuric acid, the compounds were heated at 110 degrees C. This procedure led to quantitative loss of methanol followed by ring formation between the 6-methoxy group and the branched side-chain of all compounds. The derivatives were extracted into dichloromethane-2-butanol and treated with pentafluoropropionic anhydride. The resulting derivatives were suitable for selected-ion monitoring analysis. The coefficient of variation was found to be 4.5% at 5 ng/ml and 8.9% at 50 ng/ml in urine. The corresponding values for plasma were 6.2% and 5.3%, respectively. The lower limit of detection in plasma was 150 pg/ml, permitting analysis of plasma levels of buprenorphine for 24 h and urine levels of buprenorphine and norbuprenorphine for more than seven days after a therapeutic dose of buprenorphine. This method is the first with sufficient specificity and sensitivity for characterization of the clinical pharmacokinetics of buprenorphine.     

Electrochemical characterization of some ferrocenylcarboxylic acids

Summary Several carboxy-substituted ferrocene compounds are prepared and investigated by cyclic voltammetry in acetonitrile solution. The half-wave potentials of most of the acids studied (E _1/2=0.34–0.58 V versus s.c.e.) are more positive than that of ferrocene (0.33 V), reflecting a diminished susceptibility to oxidation of these compounds relative to the parent metallocene. Only -ferrocenylpropionic acid (0.32₅ V) is effectively identical with the latter in its oxidation behaviour, and -ferrocenylbutyric acid (0.31 V) tends to be more readily oxidized. The results are of interest for subsequent chemical oxidation studies of ferrocenylcarboxylic acids.     

Flow curves of an adsorbed protein layer at the saliva-air interface

At the air-liquid interface of human saliva a protein layer is adsorbed. An apparatus is described with which a flow curve of this layer was measured. In the majority of samples the viscosity of the surface layer changed gradually and could be described by a power-law dependence on the shear rate. The zero-shear viscosity was 1–100 MPa·s. In some saliva samples a sharp yield point was observed.     

Korrosion

Ohne Zusammenfassung     

Aberration-corrected STEM imaging of Ag on gamma-Al2O3.

Ag on gamma-alumina is a promising catalyst for hydrocarbon selective catalytic reduction in lean-burn gasoline and diesel engines for transportation applications. Although much is known about the mechanism of NOx reduction and the various intermediates, little agreement exists on the nature of the active silver species. In the present work, aberration-corrected STEM has provided new information about the nature of Ag on alumina both as impregnated and following treatments at various temperatures with exposure to simulated exhaust gas. Ex situ techniques have provided new insights into the evolution of Ag on alumina following exposure to temperature and simulated exhaust gas.     

Visualizing the whispering gallery modes in a cylindrical optical microcavity

Whispering gallery modes in cylindrical integrated optics microcavities have, for what is to our knowledge the first time, been mapped with a photon scanning tunneling microscope. Optical images were obtained with a spatial resolution of 50 nm. By combination of information on the spatial optical distributions with wavelength-dependent measurements, an unexpectedly rich variety of intracavity phenomena, such as polarization conversion and interference of copropagating and counterpropagating modes, could be directly observed. A quantitative comparison of the experimental data with computer simulations results in a comprehensive understanding of the various whispering gallery modes inside the microcavity.     

Microwave spectrum,rotational constants and dipole moment of s-cis acrolein

The microwave spectrum of a second conformer of acrolein is reported for the first time. Ground-state rotational constants and quartic centrifugal distortion constants were determined from 42 transitions in the range 8–60 CHz. The small inertial defect establishes its planarity. The dipole moment of s-cis acrolein is μ_a = 2.010(5) D, μ_b = 1.573(3) D and μ_total = 2.552(3) D.     

Synthesis, structure, and ethene polymerisation catalysis of 1- or 2-silyl substituted bis[indenyl]zirconium(IV) dichlorides

The systematic syntheses of 1- and 2-substituted silylindenes, with a wide variety of substitution patterns on the silyl moiety, and their corresponding zirconocene dichlorides are presented. The rac- and meso-diastereomers of the 1-substituted zirconocene dichlorides can in most cases be separated. Instable zirconocenes were observed for certain substitution patterns. Two of the obtained zirconocene dichlorides, bis[2-(dimethylsilyl)indenyl]zirconium dichloride (4a) and bis[2-(trimethylsilyl)indenyl]zirconium dichloride (4b), were characterised by single crystal X-ray diffraction. On the basis of DFT results, the two compounds are geometrically similar, i.e. the additional methyl group on the silyl moiety only affects the conformational energy profile. Differences in their catalyst performance in the homopolymerisation studies with ethane are thus attributed to conformational control. For the remaining complexes, sterically less demanding silyl groups seem to be favoured with respect to the catalyst performance. All the 2-isomers have lower polymerisation activities than the unsubstituted bis[indenyl]zirconium dichloride/MAO system. Curiously, the rac-bis[1-(dimethylphenylsilyl)indenyl]zirconium dichloride/MAO system is found to be the most active catalyst in ethene homopolymerisations.     

Screening the molecular surface of human anticoagulant protein C: A search for interaction sites

Protein C (PC), a 62 kDa multi-modular zymogen, is activated to an anticoagulant serine protease (activated PC or APC) by thrombin bound to thrombomodulin on the surface of endothelial cells. PC/APC interacts with many proteins and the characterisation of these interactions is not trivial. However, molecular modelling methods help to study these complex biological processes and provide basis for rational experimental design and interpretation of the results. PC/APC consists of a Gla domain followed by two EGF modules and a serine protease domain. In this report, we present two structural models for full-length APC and two equivalent models for full-length PC, based on the X-ray structures of Gla-domainless APC and of known serine protease zymogens. The overall elongated shape of the models is further cross-validated using size exclusion chromatography which allows evaluation of the Stokes radius (r_s for PC = 33.15 Å r_s for APC = 34.19 Å), frictional ratio and axial ratio. We then propose potential binding sites at the surface of PC/APC using surface hydrophobicity as a determinant of the preferred sites of intermolecular recognition. Most of the predicted binding sites are consistent with previously reported experimental data, while some clusters highlight new regions that should be involved in protein-protein interactions.