Study of reaction processes by in-line near-infrared spectroscopy in combination with multivariate curve resolution: Esterification of myristic acid with isopropanol

The acid-catalysed esterification of myristic acid with isopropanol was studied by using near-infrared spectroscopy (NIR) in combination with soft-modeling curve resolution (MCR) methodology with a view to establishing the effect of experimental variables on the reaction kinetics. The reaction was conducted at temperatures above the boiling point of the alcohol, with continuous addition of an isopropanol/water mixture to the reactor. Spectral and concentration profiles were determined by applying soft-modeling curve resolution methodology to a column-wise augmented data matrix containing the spectra for the pure components. MCR profiles were compared with reference values and found to depart from then by less than 3% as %RSE for concentrations and to exhibit correlation above 0.999 for spectra.The reaction kinetics as estimated from the concentration profiles was found to be pseudo-first-order. Also, the pseudo-first-order rate constant was found to depend on the flow-rate of the isopropanol/water mixture and its water content; although the constant decreased with increase in the proportion of water, a content of ca. 15% could be used without important retarding effects on the kinetics. The proposed NIR-MCR method allows the rate constant and the influence of the initial water content to be determined with a view to minimizing consumption of the raw materials and optimizing the experimental conditions.     

The nature of active sites in Ba(OH)2 catalyst

A general and repetitive method to determine the base strength and number of basic sites of catalysts with low surface area is reported. The nature of the titrating agent is discussed. The nature of the active sites of a Ba(OH)₂ catalyst with low surface area is discussed.

---

. . Ba(OH)₂, .

     

Determination of amino acids in apple extracts by high performance liquid chromatography

Summary A rapid and sensitive method for the simultaneous determination of primary amino acids in apple is described. After sample preparation, amino acids were derivatized with o-phthaldialdehyde/2-mercaptoethanol and separated on a reversed phase column with a gradient of phosphate buffer-tetrahydrofuran-methanol as the mobile phase. Detection was carried out with a fluorescence detector at excitation and emission wavelengths of 340 nm and 425 nm respectively. Recovery studies showed good results for all substances (91–109%) (with coefficients of variation ranging, from 0.1 to 9.0%). This method was applied to the monitoring of amino acids during the ripening of apples.     

Particle and surface characterization of a natural illite and study of its copper retention

Illite clays are known to have a strong affinity for metallic pollutants in the environment and can be applied as low-cost adsorbents for industrial waste treatment. A crucial factor in the development of such applications, however, is the understanding of the chemical, mineralogical, and colloidal properties of these clays. It is also important to understand the mechanisms involved in the surface adsorption of metals by these adsorbants. In order to study the retention of transition metals on illite clays, we have applied surface characterization techniques such as FPIA, SEM-EDX, XRD, N2 (77 K) adsorption, and FTIR. In addition to these experimental techniques, we have also employed a theoretical model that accounts for the chemistry of transition metal ions, and considers the global retention process to be the sum of several single retention processes. This model adequately fits the experimental data and allows for the speciation of metal retention on illite surfaces. Between pH values of 2.53 and 3.01 the only adsorption processes are the electrostatic sorption of [Cu(H2O)6]2+, and the surface complexation of [Cu(H2O)6]2+ and [Cu(OH)(H2O)5]+ ions. Surface complexation of [Cu(OH)(H2O)5]+ ions increases with pH, overcoming [Cu(H2O)6]2+ retention, and thus contributing to the surface precipitation of Cu(OH)2.     

Characteristic polynomial theory of two-stage phase shifting algorithms

Two-stage phase shifting algorithms make possible to directly recover the sum or the difference of the optical phase of two different fringe patterns. These algorithms can be built by combining the known phase shifting algorithms in a non-linear way. In this work, we associate a two-dimensional characteristic polynomial to each two-stage phase shifting algorithm. This enables us to qualitatively compare their behaviour against the main systematic error sources, by means of an analysis protocol like that used for phase shifting algorithms. We show that this tool allows to understand the propagation of properties from precursor phase shifting algorithms to new evaluation algorithms built from them. As an experimental application, a wavefront distortion evaluation in differential phase-shifting interferometry is presented.     

Interactions between cellulose nanofibers and retention systems in flocculation of recycled fibers

Although the positive effect that cellulose nanofibers (CNF) can have on paper strength is known, their effect on flocculation during papermaking is not well understood, and most relevant studies have been carried out in presence of only cationic starch. Flocculation is the key to ensuring retention of fibers, fines, and fillers, and furthermore floc properties have a great influence on paper quality. The aim of this research is to study the interactions between CNF and flocculants by assessing the effect of two types of CNF, from eucalyptus and corn, on the flocculation process induced by three different retention systems [a dual system, polyvinylamine (PVA), and cationic starch as reference]. The results showed that CNF interacted with the flocculants in different ways, affecting flocculation efficiency and floc properties. In general, addition of CNF increased floc stability and minimized overdosing effects. Moreover, presence of CNF increased floc size for given PVA dose; therefore, CNF addition could contribute to improve the wet end in the paper machine if combined with the optimal flocculant and dose.     

A Kinetic Spectrophotometric Method to Determine the Insecticide Methyl Parathion in Commercial Formulations and the Aqueous Environment

Abstract

A simple kinetic-spectrophotometric method for the analysis of the organophosphate insecticide methyl parathien is presented. The method is based on the alkaline hydrolysis of the insecticide into its main metabolite p-nitrophenol. The influence of reaction variables (pH and temperature), and the effect of other pesticides, are discussed. The calibration graphs (initial rate, fixed time, fixed absorbance) were linear from 2 to 30μg/ml. The precision was calculated for the different methods applied, the relative standard deviation being 6.25% for 4μg/ml.

The proposed kinetic method can be applied directly to synthetic mixtures, commercial formulations and different aqueous environment, with recoveries close to 100%.     

Temperature dependence of the properties of ternary systems ethanol + water + an aliphatic alkane (C6-C9)

The measures and calculation of different properties such as refractive index, density, speed of sound, excess molar volume, and isentropic compressibility of the ternary heterogeneous compounds by ethanol + water + (n-hexane, n-heptane, n-octane, n-nonane) have been performed in the range 288.15–323.15 K and atmospheric pressure. Attending to the accurate results of these models, the equation of state enclosing mixing rules is indicated as a simple estimation of the procedures of these properties for this kind of multicomponent systems.     

Cytotoxic and NF-κB inhibitory sesquiterpene lactones from Piptocoma rufescens

Six new (1-6) and eight known germacranolide-type sesquiterpene lactones, along with several known phenylpropanol coumarates and methylated flavonoids, were isolated from the leaves of Piptocoma rufescens, collected in the Dominican Republic. The new compounds were identified by analysis of their spectroscopic data, with the molecular structure of 3 being established by single-crystal X-ray diffraction. The absolute configurations of the sesquiterpene lactones isolated were determined from their CD and NOESY NMR spectra, together with the analysis of Mosher ester reactions. Bioassay screening results showed the majority of the sesquiterpene lactones isolated (1-13) to be highly cytotoxic toward the HT-29 human colon cancer cell line, with the most potent compound being 15-deoxygoyazensolide (10, IC(50), 0.26 μM). In addition, several of the sesquiterpene lactones exhibited NF-κB (p65) inhibitory activity.