AlPO4?ZrO2 catalysts, II. Synthesis, textural properties and crystal structure of systems obtained in ethylene oxide

The effects of surface dehydration on textural properties, crystallinity and the structure of AlPO₄–ZrO₂ (weight ratio AlPO₄/ZrO₂=3) systems precipitated with ethylene oxide have been studied by N₂ adsorption and XRD measurements. The increase in calcination temperature in the range 773–1273 K decreases the textural parameters as a consequence of AlPO₄ crystallization to the tridymite form.

---

, AlPO₄–ZrO₂ ( AlPO₄/ZrO₂=3), , N₂ - . 773 1273 , AlPO₄ .

     

Limonene concentration in lemon (Citrus volkameriana) peel oil as a function of ripeness

The dependence of the limonene content of lemon (Citrus volkameriana) peel oil on the degree of ripeness of the fruit has been studied by using steam distillation and cold pressing to extract the oils from lemon fruit peel at different stages of maturation (green, greenish-yellow, and yellow-orange peel coloration). Samples of essential oils were analyzed by high resolution GC and GC-MS, using tetradecane as internal standard for quantitation. Forty components were detected; thirty eight were positively identified by comparison of their mass spectra (El, 70 eV) and Kováts retention indexes (determined using a non-logarithmic scale on capillary columns coated with both polar (DB-Wax) and non-polar (DB-1) stationary phases) with those of standards and with data reported in the literature. The limonene concentration reached a maximum level of 79.4% when the fruit was in the intermediate maturation stage characterized by greenish-yellow coloration.     

One-pot multicoupling reaction of silylcopper reagents, organolithium compounds and α,β-unsaturated nitriles

The silylcupration of allene using a lower order silylcopper species gives an allylsilane-vinyl copper intermediate 2 which, in conjunction with an organolithium reagent, is able to participate in a one-pot multicoupling reaction with α,β-unsaturated nitriles. The scope of this tandem reaction is studied and a possible mechanism pathway is outlined.     

Rapid probe of the nicotine spectra by high-resolution rotational spectroscopy

Nicotine has been investigated in the gas phase and two conformational forms were characterized through their rotational spectra. Two spectroscopic techniques have been used to obtain the spectra: a new design of broadband Fourier transform microwave (FTMW) spectroscopy with an in-phase/quadrature-phase-modulation passage-acquired-coherence technique (IMPACT) and narrowband FTMW spectroscopy with coaxially oriented beam-resonator arrangement (COBRA). The rotational, centrifugal distortion and hyperfine quadrupole coupling constants of two conformers of nicotine have been determined and found to be in N-methyl trans configurations with the pyridine and pyrrolidine rings perpendicular to one another. The quadrupole hyperfine structure originated by two (14)N nuclei has been completely resolved for both conformers and used for their unambiguous identification.     

FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H

The study explored the compatibility between the main product of Portland cement hydration and the main product of the alkali activation of fly ash: C–S–H and N–A–S–H gels, respectively. Both gels were synthesized with laboratory reagents at different pH values. Blends of the two were synthesized as well, using the sol–gel procedure. All the gels were characterized with Fourier transform IR spectroscopy (FTIR). The gels synthesized with this procedure were shown to precipitate together with a silica-rich gel. In addition, the pH level was found to play a determinant role in both C–S–H and N–A–S–H gel synthesis. The C–S–H gel is the major phase formed at pH > 11 and N–A–S–H gel for pH > 12. The results relating to the joint synthesis of the two (C–S–H and N–A–S–H) gels were not conclusive. Technique used for the characterization failed to differentiate between them in the blended material.

SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5′-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5′-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δv), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization (k₁) from Z to N in the excited state. Some of these parameters (f_N, Δv, Q_N, k₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

Multiresidue analysis of quinolones in water by ultra‐high perfomance liquid chromatography with tandem mass spectrometry using a simple and effective sample treatment

A rapid and simple analytical method has been developed for the determination of 19 quinolones in environmental water samples using ultra high performance liquid chromatography with tandem mass spectrometry. Chromatographic and detection conditions have been optimized and the separation was achieved in less than 4 min. The separation was carried out using a new‐generation column filled with superficially porous particles, resulting in lower backpressure and better resolution than totally porous particle columns. The quinolones were detected by electrospray ionization in positive mode using multiple‐reaction monitoring mode for acquisition. A sample treatment based on liquid–liquid extraction and phase separation via salting‐out was employed to achieve a fast and simple extraction that enables the multiresidue analysis. The method has been validated for an environmental well water sample from a mountain area. Very low limits of detection (between 10 and 90 ng/L) with relative standard deviations lower than 16.5% and recoveries higher than 73% were achieved. Moreover, well waters from different origins (mountain and coast areas and irrigated land) have been evaluated and similar results were obtained.     

Chemical activation of carbon mesophase pitches

This paper studies the chemical activation of mesophase pitches of different origins in order to obtain activated carbons suitable for use as electrodes in supercapacitors. The effect that the activating agent (NaOH, LiOH, and KOH), the alkaline hydroxide/pitch ratio, and the activation temperature had on the characteristics of the resultant activated carbons was studied. LiOH was found to be a noneffective activating agent, while activation with NaOH and KOH yielded activated carbons with high apparent surface areas and pore volumes. The increase of the KOH/pitch ratio caused an increase of the chemical attack on the carbon, producing higher burnoffs and development of porosity. Extremely high apparent surface areas were obtained when the petroleum pitch was activated with 5:1 KOH/carbon ratio. The increase of the activation temperature caused an increase of the burnoff, although the differences were not as significant as those derived from the use of different proportions of activating agent.     

Isotope dilution GC-MS routine method for the determination of butyltin compounds in water

A standard GC-MS instrument with electron impact ionisation has been used to develop a fast, simple and reliable method for the simultaneous determination of monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in water samples. Isotope dilution analysis (IDA) is used for the determination of species, taking advantage of a commercially available spike solution containing a mixture of MBT, DBT and TBT enriched in ¹¹⁹Sn. Method detection limits for 100-mL samples were between 0.18 and 0.25 ng L⁻¹ for the three butyltin compounds with typical RSD between 2 and 4% at levels between 100 and 10 ng L⁻¹, respectively. Recovery of tin species in spiked samples (natural water, wastewater and seawater) was quantitative. The stability of butyltin compounds in collected seawater samples was also studied. The addition of a 1% (v/v) glacial acetic acid preserved tin species in the samples for at least 5 days at room temperature. The IDA method was finally implemented in a routine testing laboratory and it was subsequently accredited by the Spanish National Accreditation Body according to the requirements of UNE-EN ISO/IEC 17025.