Micellar-stabilized room-temperature phosphorimetric determination of the fungicide thiabendazole in canned pineapple samples

A method for the determination of the fungicide thiabendazole (TBZ) by micellar-stabilized room-temperature phosphorescence is described. It does not require any separation step and allows the direct determination of the fungicide in canned pineapple samples. The effect of various experimental conditions is discussed in detail. The analytical curve of thiabendazole gives a linear dynamic range of 23.8–500.0 ng mL^–1 and a detection limit of 23.8 ng mL^–1. Recoveries of 103.9 and 89.2% for syrup and canned pineapple pulp, respectively, were obtained for 250 ng mL^–1 thiabendazole.     

Activity characterization of 192Ir brachytherapy wires

Summary The radionuclide ¹⁹²Ir has been increasingly used as a brachytherapy source and manufactured in different geometry forms (thin wires, hairpins, needles or point sources). A procedure for the characterization of the activity content of ¹⁹²Ir wire sources was developed in order to establish the secondary standard activity measurement system based on the ionization chamber set up at Brazilian National Laboratory for Ionizing Radiation Metrology (LNMRI). Firstly, the ion current of the ionization chamber is measured and, subsequently, the activity is determined in a destructive analysis. This procedure enables obtaining the calibration factor for wire sources that can be used for further activity determination of similar sources in a non-destructive analysis. Accurate activity determination is needed for dosimetric measurements and for helping the manufacturers to improve its quality control programs.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

A natural scalar field in the einstein gravitational theory

In a Riemannian space-time, the difference between the third-order tensor potentialH of the Riemann tensor (presented in a precedent paper) and the Lanczos generating function of the Weyl tensor is here shown to be characterized by a vectorV , obtained by contractionH . The significant role of such a vector, in the context of general relativity, is then discussed. Particular attention is paid to the scalar potential which characterizes the irrotational part ofV : such a scalar field satisfies a space-time wave equation of the Poisson type. Weak fields are also considered: in the particular case of a static metric, the scalar is found to be proportional to the classic Newtonian potential.This work was done in the sphere of activity of the C.N.R. Groups for mathematical research.     

Determination of trace levels of mercury in water samples based on room temperature phosphorescence energy transfer

A novel method has been developed for the sensitive determination of mercury in aqueous media by room temperature phosphorescence (RTP). The measurement principle is based on the energy transfer (ET) from a phosphor molecule (acting as a donor) to a Hg-sensitive dye (acceptor). To our acknowledgment this is the first RTP method for mercury measurement developed so far. α-Bromonaphthalene (BrN) was selected as the phosphorescent donor molecule (BrN can produce significant RTP emission in aqueous media in a β-cyclodextrin rigid microenvironment without deoxygenation).The absorption spectrum of the complex formed between mercury and the dithizone dye possesses a desirable spectral overlap with the RTP emission spectrum of the donor (BrN), giving rise to a nonradiative ET from the phosphor molecules to the mercury complex. An increase in the concentration of Hg(II) causes an increase on the concentration of the dithizone complex (acceptor) with the subsequent increase of the absorbance and, therefore, resulting in a decrease of the RTP emission. Both, RTP intensities and triplet lifetimes of the BrN decreased with increases on the Hg(II) concentration.Possible interferences present in natural waters, including different cations and anions, which could affect the analytical response, were evaluated and the analytical performance characteristics investigated. The use of phosphorescence measurements (low background noise signals) resulted in an improvement on the sensitivity of the Hg(II) detection higher than five times as compared to the molecular absorption spectrophotometric method for Hg(II) detection based on dithizone as Hg-indicator. A detection limit (D.L.) of 14 ng ml⁻¹ of Hg(II) was obtained by RTP with a precision of ±4.8% for five replicates of 300 ng ml⁻¹ of Hg(II). The usefulness of the method was successfully evaluated by the determination of Hg(II) in spiked natural water samples.     

Acyclic Schiff base salts derived from 1,3‐diaminopropane and 1,3‐diamino‐2‐hydroxypropane

Two salts of acyclic Schiff base cationic ligands, namely N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride monohydrate, C₁₇H₂₂N₄O₄²⁺·2Cl⁻·H₂O, (I), and 2‐hydroxy‐N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride, C₁₇H₂₂N₄O₅²⁺·2Cl⁻, (II), were synthesized as precursors in order to obtain new acyclic and macrocyclic multidentate ligands and complexes. The cation conformations in compounds (I) and (II) are different in the solid state, although the cations are closely related chemically. Similarly, the hydrogen‐bonding networks involving ammonium cations, hydroxyl groups and chloride anions are also different. In the cation of compound (II), the hydroxyl group is disordered over two sets of sites, with occupancies of 0.785 (8) and 0.215 (8).     

Comparison between preparative methodologies of nanostructured carbon nitride and their use as selective photocatalysts in water suspension

Carbon nitride photocatalysts have been prepared by different methodologies, such as chemical ultrasonic irradiation (sonochemical treatment), hydrothermal and ball milling and thermoexfoliation, and have been used for the selective oxidation of 5-hydroxymethyl-2-furaldehyde (HMF) to form 2,5-furandicarboxyaldehyde (FDC) in water suspension both under UV and natural solar irradiation. The physico-chemical features of the photocatalysts have been studied by X-ray diffraction, infrared spectroscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, scanning electron microscopy, and specific surface area measurements. The results indicate that exfoliation of carbon nitrides can increase the conversion of HMF and the selectivity to FDC. In particular, samples exfoliated by both thermal and acidic ultrasonic irradiation treatments showed the best photocatalytic performance.     

Quantitative Structure-Toxicity Relationships Using Tops-Mode. 2. Neurotoxicity of a Non-Congeneric Series of Solvents

Abstract

Neurotoxicities of a series of solvents in rats and mice have been modeled by means of the TOPS-MODE approach. Two quantitative structure-toxicity relationship (QSTR) models were obtained explaining more than 80% of the variance in the experimental values of neurotoxicity of 45 solvents. Only one compound was detected as statistical outlier for these models. In contrast, previous models explained less than 60% of the variance in this property for 44 solvents. Finally, the contributions to neurotoxicity in rats and mice for a series of structural fragments were found. Structural characteristics of chlorinated fragments responsible for their different neurotoxicities were analyzed. The differences in neurotoxic behavior of some fragments in rats and mice were also analyzed, which could give insights on the toxicological mechanism of action of solvents studied.