Flame emission studies of several metal chlorides with vapor-phase sampling

A method is described for the production of spectra of aluminum chloride, iron(III) chloride, silicon tetrachloride and titanium tetrachloride vapors by flame emission spectrometry. The aluminum and iron(III) chloride vapors were prepared by heating solid samples in reaction flasks; silicon and titanium tetrachlorides have sufficient vapor pressures at ambient temperatures to produce vapor-phase samples. Techniques have been developed to introduce the sample into the flame as a vapor, and to accommodate a large concentration of sample while requiring minimum preparation. Spectra were obtained individually and as a mixture over 240–600 nm. The analytical wavelength was chosen for each element, and 10-s integrations were made by utilizing a microcomputer to slew rapidly to the line of interest, hold for 10 s on the emission line, move off wavelength, hold for a 10-s background measurement and slew rapidly to the next line of interest. The microcomputer was also used to digitize and display the number of photons counted.     

Polymerization by oxidation coupling. I. A study of the oxidation of 2,6-diphenylphenol to poly(2,6-diphenyl-1,4-phenylene ether)

The synthesis of poly(2,6-diphenyl-1,4-phenylene ether), by the oxidative coupling of 2,6-diphenylphenol has been studied. Procedures were found which demonstrated that polymers of very high molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \left( {\overline M _n > 200{\rm 000; }\left[ \eta \right]_{{\rm CHCl}_{\rm 3} }^{25^\circ {\rm C}} > 1.1{\rm }{{{\rm dl}} \mathord{\left/ {\vphantom {{{\rm dl}} g}} \right. \kern-\nulldelimiterspace} g}} \right) $\end{document} could be made with a copper-amine catalyst system. A low nitrogen-to-copper ratio (1 N atom/Cu atom) was necessary to obtain the very high molecular weights under the conditions of these reactions. A variety of amines formed active catalysts; the effectiveness of mono- and bis- primary, secondary, and tertiary amines were compared. Effects of the type of copper halide, reaction temperature, desiccants, addition rates of 2,6-di-phenylphenol, and solvents were also examined. Samples of polymer were isolated at different times during the polymerization. Measurements of viscosity, osmotic pressure, light scattering, gel permeation, phenolic hydroxyl groups, and nitrogen content were made on various samples over a range of intrinsic viscosities of 0.05–0.59 dl/g. A very narrow molecular weight distribution was found for all samples. Hydroxyl endgroup analyses indicated that the concentration of phenolic endgroups per mole of polymer does not change during the polymerization. The presence of some side reactions is indicated by nitrogen analyses. The relationships between the intrinsic viscosity in chloroform at 25°C and M?_n and M?_w are: log [η] = ?3.97 + 0.72₇ log M?_n and log [n] = ?3.56 + 0.62₄ log M?_w.     

Syntheses and Crystal Structures of Some CCo3 Clusters Containing PPh3 or dppm Ligands

Molecular structural determinations are reported for six Co₃C carbonyl cluster complexes containing tertiary phosphines, which have been isolated as by-products from a variety of reactions. Structural features are similar to those of related complexes already reported. Some discussion of apparent orientational preferences of the CH₂ group of dppm ligands, which appear to enter into H-bonding interactions with amido or carboxylate substituents, is given. Appropriate comparisons are made with unsubstituted analogues.     

Protonation and methylation of η-2,3,5,6-tetramethyl-1,4-benzoquinone(η-pentamethylcyclopentadienyl)cobalt

The preparation of the η⁴-4-2,3,5,6-tetramethyl-1,4-benzoquinonecomplex [CO(C₅Me₅)(C₁₀H₁₂O₂)] (I) is reported. Complex I undergoesreversible protonation to yield the 2-6-η-4-hydroxy-1-oxo-2,3,5,6-tetramethylcyclohexadienyl complex [Co(C₅Me₅)(C₁₀H₁₃O₂)BF₄ (II) and diprotonation to yield the η⁶-6-1,4-dihydroxy-2,3,5,6-tetramethylbenzene complex [Co(C₅Me₅)(C₁₀H₁₄O₂)] (BF₄)₂ (III). Methylation of complex I with MeI/AgPF₆ gives the 2---6-η-4-methoxy-1-oxo-2,3,5,6-tetramethylcyclohexadienyl complex [Co(C₅Me₅)(C₁₁H₁₅O₂])PF₆ (IV). In trifluoroacetic acid solution complex IV is protonated to form the η⁶-1-hydroxy-4-methoxy-2,3,5,6-tetramethylbenzene cation [Co(C₅Me₅)-(C₁₁H₁₆O₂)]²⁺     

Reactions of poly(phenylene oxide)s with quinones. I. The quinone-coupling reaction between low-molecular-weight poly(2,6-dimethyl-1,4-phenylene oxide) and 3,3′,5,5′-tetramethyl-4,4′-diphenoquinone

A bifunctional polymer is formed when low-molecular-weight poly(2,6-dimethyl-1,4-phenylene oxide) (I) reacts with 3,3′,5,5′-tetramethyl-4,4′-diphenoquinone (II). Infrared (IR), nuclear magnetic resonance (NMR), and gel permeation chromotography (GPC) measurements indicate that the quinone is bound covalently to the polymer chain as a biphenyl moiety which can be located at a terminal position (III, a = 0) or an internal position (III, a > 0): Acetylation of III produces a diacetate ester characterized by field desorption mass spectrometry to confirm the bifunctional nature of III. The reaction of I with II proceeds at 25°C but is faster at elevated temperatures or with amine catalysis. Oxidation of III with oxygen and a copper/amine catalyst of the type used initially to prepare I regenerates II from the biphenyl moiety in III in high yield and converts the remaining oxyphenylene units to high-molecular-weight polymer.     

The Diels—Alder reaction in organometallic chemistry VI. Diels—Alder reactions of α-pyrone with group IV element-substituted acetylenes

The Diels—Alder reactions of α-pyrone with Me₃SiCCSiMe₃, Me₃SiCCSiMe₂H, Me₂HSiCCSiMe₂H, Me₃GeCCGeMe₃, Me₃SiCCGeMe₃, Me₃SiCCSnMe₃ and EtCCEt were examined. All except the first two acetylenes gave the expected 1,2-disubstituted benzene product, in line with results obtained previously with Me₃SnCCSnMe₃. The first two acetylenes, Me₃SiCCSiMe₃ and Me₃SiCCSiMe₂H, also yielded benzene products containing substantial amounts of the 1,3-disubstituted benzenes, as well as minor amounts of the 1,4-isomers. This formation of unexpected isomers during these reactions was shown to result from acid-catalyzed rearrangement of the initially formed 1,2-disubstituted products, 1,2-(Me₃Si)₂C₆H₄ and 1-Me₃Si-2-Me₂HSiC₆H₄. The acidic impurities arose from pyrolysis of the bromobenzene solvent used or were introduced as contaminants of the α-pyrone. Such isomerizations were inhibited by addition of small amounts of triethylamine. The fact that no rearrangement took place with the other acetylenes is due to the scavenging of acidic impurities which might cause isomerization by the starting acetylene and the benzene product via metal—carbon bond cleavage processes.     

Two pseudopolymorphic hydrates of brucine: brucine–water (1/4) and brucine–water (1/5.25) at 130 K

The structures of two pseudopolymorphic hydrates of brucine, C₂₃H₂₆N₂O₄·4H₂O, (I), and C₂₃H₂₆N₂O₄·5.25H₂O, (II), have been determined at 130 K. In both (I) and (II) (which has two independent brucine mol­ecules together with 10.5 water mol­ecules of solvation in the asymmetric unit), the brucine mol­ecules form head‐to‐tail sheet substructures, which associate with the water mol­ecules in the inter­stitial cavities through hydrogen‐bonding associations and, together with water–water associations, give three‐dimensional framework structures.     

Mechanistic control of product selectivity. Reactions between cis-/trans cis-/trans-[OsVI(tpy)(Cl)2(N)]+ and triphenylphosphine sulfide

Reactions between the Os(VI)-nitrido complexes cis- and trans-[Os(VI)(tpy)(Cl)2(N)]+ (tpy is 2,2':6',2"-terpyridine) and triphenylphosphine sulfide, SPPh3, give the corresponding Os(IV)-phosphoraniminato, [Os(IV)(tpy)(Cl)2(NPPh3)]+, and Os(II)-thionitrosyl, [Os(II)(tpy)(Cl)2(NS)]+, complexes as products. The Os-N bond length and Os-N-P angle in cis-[Os(IV)(tpy)(Cl)2(NPPh3)](PF6) are 2.077(6) A and 138.4(4) degrees. The rate law for formation of cis- and trans-[Os(IV)(tpy)(Cl)2(NPPh3)]+ is first order in both [Os(VI)(tpy)(Cl)2(N)]+ and SPPh3 with ktrans(25 degrees C, CH3CN) = 24.6 +/- 0.6 M(-1) s(-1) and kcis(25 degrees C, CH3CN) = 0.84 +/- 0.09 M(-1) s(-1). As found earlier for [Os(II)(tpm)(Cl)2(NS)]+, both cis- and trans-[Os(II)(tpy)(Cl)2(NS)]+ react with PPh3 to give [Os(IV)(tpy)(Cl)2(NPPh3)]+ and SPPh3. For both complexes, the reaction is first order in each reagent with ktrans(25 degrees C, CH3CN) = (6.79 +/- 0.08) x 10(2) M(-1) s(-1) and kcis(25 degrees C, CH3CN) = (2.30 +/- 0.07) x 10(2) M(-1) s(-1). The fact that both reactions occur rules out mechanisms involving S atom transfer. These results can be explained by invoking a common intermediate, [Os(IV)(tpy)(Cl)2(NSPPh3)]+, which undergoes further reaction with PPh3 to give [Os(IV)(tpy)(Cl)2(NPPh3)]+ and SPPh3 or with [Os(VI)(tpy)(Cl)2(N)]+ to give [Os(IV)(tpy)(Cl)2(NPPh3)]+ and [Os(II)(tpy)(Cl)2(NS)]+.