Fluorimetric determination of danthron in pharmaceutical tablets and in urine

A simple, rapid determination is reported for danthron (1,8-dihydroxyanthraquinone) in pharmaceutical tablets. In a flow-injection system, danthron is reduced by sodium dithionite in $\text{1}\text{1}$ methanol/borate buffer to give a fluorescent complex. Linearity ranges from 30 μg ml^?1 to below 0.1 μg ml^?1. In urine samples, danthron is separated from other fluorescing species by reversed-phase high-performance liquid chromatography before its reduction by dithionite in a post-column reactor. Urine preparation requires no extraction. Spiked urine samples were studied in the working range of 0.02–2.0 μg ml^?1 danthron.     

Ion cyclotron resonance studies of alkylsilyl ions: V—The reactions of alcohols and ethers with the allyldimethylsilyl cation

Diallyldimethylsilane provides a source of the allyldimethylsilyl cation in the ion cyclotron resonance spectrometer; reaction of this cation with alcohols (ROH) produces adducts which decompose by loss of C₃H₆ to yield the ion \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm Me}_2 \mathop {\rm S}\limits^{\rm + } {\rm i} - {\rm OR}} \right] $\end{document}. This elimination is thought to occur by a 1,5-hydrogen shift, together with either stepwise or concerted silicon-carbon bond cleavage. The corresponding aducts from ethers R? O? R¹ (R¹?R, R¹?Et) first lose (R¹? H˙) and then undergo the elimination described above.     

Separation of Natural Food Pigments in Saponified and Un-Saponified Paprika Oleoresin by Ultra High Performance Supercritical Fluid Chromatography (UHPSFC)

The natural pigments in paprika were rapidly and efficiently separated by ultra high performance supercritical fluid chromatography. The separation of both un-saponified and saponified mixtures of paprika oleoresin were optimized, with run times of 10.6 min. Three different C18 columns, a cyano, silica and diol column, all 3 × 100 mm, with 1.8 μm particles were compared. The best separation for the un-saponified sample was found with an SB-C18 column, while the saponified samples were best separated on a bare silica, RX-Sil column. A SB-CN column allowed near optimum separation of both the unsaponified, and saponified samples, with similar run times. The best mobile phase was carbon dioxide (CO₂) modified with isopropyl alcohol (IPA), with a composition gradient. Fingerprints of several commercial pepper products indicated that one appeared to be colored with artificial dyes, while the color of a chili powder may have been enhanced with a paprika extract. Spectra, using CO₂ with IPA as modifier, produced a single maximum at 453 nm, which appears to represent up to a 30 nm solvatochromic shift from the maxima in most organic solvents. Acetonitrile (ACN) as modifier produced spectra with two maxima and a similar solvatochromic shift. These results appear to be the first on saponified paprika oleoresin samples using SFC. It is also the first detailed report on the separation of un-saponified samples. The results are up to six times faster than comparable results by HPLC. It appears that SFC is a viable, superior alternative to HPLC for the analysis of this important commercial product, without using ACN, or chlorinated solvents.

     

Rapid, Direct Quantitation of the Preservatives Benzoic and Sorbic Acid (and Salts) Plus Caffeine in Foods and Aqueous Beverages Using Supercritical Fluid Chromatography

The preservatives benzoate and sorbate, plus caffeine were rapidly separated and quantified, in just over 2 min, in a wide range of beverages and foods, using supercritical fluid chromatography (SFC). Fifteen beverages and 10 semi-liquid foods were evaluated. The benzoate and sorbate were originally present in the samples as the acid, or the sodium, or potassium salt. The aqueous samples were diluted 3:1 with acidified methanol, to insure the acids were protonated, then directly injected. The solutes were isocratically eluted from a 4 × 250 mm, 5 μm Diol column with 3.5 mL min^?1 of 8.5 % methanol containing 0.3 % acetic acid at 50 °C and a column outlet pressure of 150 bar. The real samples exhibited remarkably little interference. All the beverages were accurately labeled. However, many of the foods, such as salad dressings, mustard, etc., were mislabeled. The method was linear over a wide range with correlation coefficients for all three solutes >0.999. RSD’s were generally less than 1 %. The results agreed with the caffeine content on the labels within a few percent. Surprisingly, this appears to be the first published separation of benzoic and sorbic acid preservatives in food, and beverages using SFC, and one of a very few SFC applications where aqueous samples were simply diluted and injected. Compared to published references, the SFC method was found to be up to 7 times faster than HPLC, and eliminated the use of acetonitrile.     

Lithium–Bromide Exchange versus Nucleophilic Addition of Schiff's base: Unprecedented Tandem Cyclisation Pathways

By exploring lithium–bromide exchange reactivity of aromatic Schiff's bases with tert-butyllithium (tBuLi), we have revealed unprecedented competitive intermolecular and intramolecular cascade annulation pathways, leading to valuable compounds, such as iso-indolinones and N-substituted anthracene derivatives. A series of reaction parameters were probed, including solvent, stoichiometry, sterics and organolithium reagent choice, in order to understand the influences that limit such ring-closing pathways. With two viable reactivity options for the organolithium on the imine; namely, nucleophilic addition or lithium–bromide exchange, a surprising competitive nature was observed, where nucleophilic addition dominated, even under cryogenic conditions. Considering the most commonly used solvents for lithium–bromide exchange, tetrahydrofuran (THF) and diethyl ether (Et₂O), contrasting reactivity outcomes were revealed with nucleophilic addition promoted in THF, while Et₂O yielded almost double the conversion of cyclic products than in THF.     

Separation of 9 Sulfonamide Drugs in ≈4 Min by Ultra-High Performance Supercritical Fluid Chromatography (UHPSFC): with a Feasibility Study for Detection in Milk

Nine widely used veterinary sulfonamide drugs were baseline separated (R _s ≥1.5) in just over 4 min using a 3 × 100 mm, 1.8 μm RX-Sil column, with 9.2 % methanol in carbon dioxide, at 110 bar and 30 °C, with direct UV detection at 260 nm using a 3 mm, 2 μL tapered flow cell. Pressure drop was only 172 bar. Optimization was difficult due to the similarity in structures. Small changes in modifier concentration, temperature and pressure, each tended to improve the resolution of some peak pairs but degraded the resolution of others. There were four critical pairs, each responding differently to changes in conditions. Optimization was performed by plotting resolution between pairs as a function of modifier concentration first, temperature second, and outlet pressure third. Retention time was then minimized by changing flow rate. The estimated limit of quantitation (LOQ, S/N >10), for direct injections, was ≈200–400 ng/g of each, inadequate for regulatory requirements. Solid phase extraction (SPE) attempted to pre-concentrate samples spiked with sulfamethazine by ≈20:1. From water, the limit of detection (LOD) was ≈2.7 ng/mL with LOQ ≈9 ng/mL using UV at 260 nm. The LOD for milk was 6.2 ng/mL, and LOQ was 20.1 ng/mL. A better pre-concentration step or a more sensitive detector such as MS–MS is required. Even with these inadequacies, SFC was shown to be a feasible, faster, “greener” alternative to HPLC for the separation of these drugs.     

Analysis of the quantum numbers J(PC) of the X(3872) particle

We present an analysis of angular distributions and correlations of the X(3872) particle in the exclusive decay mode X(3872)-->J/psipi+ pi- with J/psi-->mu+ mu-. We use 780 pb-1 of data from pp[over ] collisions at sqrt[s]=1.96 TeV collected with the CDF II detector at the Fermilab Tevatron. We derive constraints on spin, parity, and charge conjugation parity of the X(3872) particle by comparing measured angular distributions of the decay products with predictions for different J(PC) hypotheses. The assignments J(PC)=1++ and 2-+ are the only ones consistent with the data.