Increased and balanced light emission of transparent organic light-emitting diodes by enhanced microcavity effects

We report on improved and controlled light outcoupling of transparent organic light-emitting diodes (TOLEDs) by inserting thin silver layers between the indium tin oxide anode and the hole transporting layer. The introduction of Ag layers influences both the bottom and top emission of the TOLEDs, and it results in dramatic changes in the electroluminescence spectra and angular distribution. We find that the overall external quantum efficiency can be increased up to 18.8%, and the ratio of bottom and top emission can be almost identical.     

Influence of organic capping layers on the performance of transparent organic light-emitting diodes

We investigate a set of transparent organic LEDs (TOLEDs) with different organic capping layer (OC) thicknesses to understand the capping layer effect. We find that thickness variation of the OC strongly influences the emission properties of TOLEDs and exhibits different trends for top or bottom emission. The external quantum efficiency for the top side can be enhanced by a factor of 63%, but that of the bottom side only by 4% compared to a reference device without an OC. Additionally, we demonstrate that the introduction of the OC is an effective method to control the bottom-to-top emission ratio within a measured range from 2.87 to 6.05.     

Semi-Parametric Probability-Weighted Moments Estimation Revisited

In this paper, for heavy-tailed models and through the use of probability weighted moments based on the largest observations, we deal essentially with the semi-parametric estimation of the Value-at-Risk at a level p, the size of the loss occurred with a small probability p, as well as the dual problem of estimation of the probability of exceedance of a high level x. These estimation procedures depend crucially on the estimation of the extreme value index, the primary parameter in Statistics of Extremes, also done on the basis of the same weighted moments. Under regular variation conditions on the right-tail of the underlying distribution function F, we prove the consistency and asymptotic normality of the estimators under consideration in this paper, through the usual link of their asymptotic behaviour to the one of the extreme value index estimator they are based on. The performance of these estimators, for finite samples, is illustrated through Monte-Carlo simulations. An adaptive choice of thresholds is put forward. Applications to a real data set in the field of insurance as well as to simulated data are also provided.     

Multi-dimensional,mechanical stimulation of cartilage implants

In biomedical engineering, it is a common practice to replace injured cartilage by implants, which are seeded with human cartilage cells. Before implanting, the implants are cultivated and usually stimulated electrically or mechanically in a bioreactor to initiate cell multiplication and oriented cell growth. A new experimental set-up is developed leading to the possibility of stimulating such implants in a multi-dimensional, physiologically consistent way. In cooperation with the University Medical Centre Aachen, a human knee simulator is developed. Cell-seeded implants are placed in a recreated human environment and stimulated with several load cycles of reproduced walking. After the cultivation period, the implanted material is removed and biologically and mechanically evaluated. The quality of the implanted material as well as the influence of the body-conformable load on the material is studied. To understand the correlation between tissue remodelling and mechanical load history, the load and movement scenario is also numerically investigated. For this reason, the experiment is transferred to a geometrically realistic FE model of a human knee. As a first approach, an elastic material model is used. The aim is to have a predictive FE model with an optimal trade-off between accuracy and efficiency using an appropriate material formulation. The results will be compared to experimental data. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preservation of the Pt(100) surface reconstruction after growth of a continuous layer of graphene

Scanning tunneling microscopy shows that a layer of graphene can be grown on the hex-reconstructed Pt(100) surface and that the reconstruction is preserved after growth. A continuous sheet of graphene can be grown across domain boundaries and step edges without loss of periodicity or change in direction. Density functional theory calculations on a simple model system support the observation that the graphene can have different rotation angles relative to the hex-reconstructed Pt surface. The graphene sheet direction can be changed by incorporating pentagon-heptagon defects giving rise to accommodation of edge dislocations. The defect formation energy and the induced buckling of the graphene have been characterized by DFT calculations.     

On the spectra of sums of orthogonal projections with applications to parallel computing

Many parallel iterative algorithms for solving symmetric, positive definite problems proceed by solving in each iteration, a number of independent systems on subspaces. The convergence of such methods is determined by the spectrum of the sums of orthogonal projections on those subspaces, while the convergence of a related sequential method is determined by the spectrum of the product of complementary projections. We study spectral properties of sums of orthogonal projections and in the case of two projections, characterize the spectrum of the sum completely in terms of the spectrum of the product.This work was supported in part by the Norwegian Research Council for Science and the Humanities under grant D.01.08.054 and by The Royal Norwegian Council for Scientific and Industrial Research under grant IT2.28.28484; also supported in part by the Air Force Office of Scientific Research under grant AFOSR-86-0126 and by the National Science Foundation under grant DMS-8704169.     

Optimal conditions for alkaline detoxification of dilute-acid lignocellulose hydrolysates

Alkaline detoxification strongly improves the fermentability of dilute-acid hydrolysates in the production of bioethanol from lignocellulose with Saccharomyces cerevisiae. New experiments were performed with NH₄OH and NaOH to define optimal conditions for detoxification and make a comparison with Ca(OH)₂ treatment feasible. As too harsh conditions lead to sugar degradation, the detoxification treatments were evaluated through the balanced ethanol yield, which takes both the ethanol production and the loss of fermentable sugars into account. The optimization treatments were performed as factorial experiments with 3-h duration and varying pH and temperature. Optimal conditions were found roughly in an area around pH 9.0/60°C for NH₄OH treatment and in a narrow area stretching from pH 9.0/80°C to pH 12.0/30°C for NaOH treatment. By optimizing treatment with NH₄OH, NaOH, and Ca(OH)₂, it was possible to find conditions that resulted in a fermentability that was equal or better than that of a reference fermentation of a synthetic sugar solution without inhibitors, regardless of the type of alkali used. The considerable difference in the amount of precipitate generated after treatment with different types of alkali appears critical for industrial implementation.     

Identification, cloning and characterization of a novel 47 kDa murine PKA C subunit homologous to human and bovine Cβ2

Background  

Two main genes encoding the catalytic subunits Cα and Cβ of cyclic AMP dependent protein kinase (PKA) have been identified in all vertebrates examined. The murine, bovine and human Cβ genes encode several splice variants, including the splice variant Cβ2. In mouse Cβ2 has a relative molecular mass of 38 kDa and is only expressed in the brain. In human and bovine Cβ2 has a relative molecular mass of 47 kDa and is mainly expressed in lymphoid tissues.     

Precision mass measurements of 40Ca17+ and 40Ca19+ ions in a Penning trap

High-precision mass measurements on lithium-like and hydrogen-like ⁴⁰Ca-ions are reported. The obtained mass of the hydrogen-like and lithium-like ion is 39.952181819(29) u and 39.953272223(24) u, respectively. The corresponding mass of the ⁴⁰Ca atom is 39.962590858(22) u. This new value has a precision ten times higher than the literature value.