Selective pressurized liquid extraction of polychlorinated biphenyls from fat-containing food and feed samples influence of cell dimensions, solvent type, temperature and flush volume

Sulphuric acid impregnated silica was used for the lipid free extraction of polychlorinated biphenyls from fat containing food and feed matrices using pressurized liquid extraction on a Dionex ASE300, with 34 mL cells. Data were compared to a previous publication where extractions had been performed on a Dionex ASE200, with 33 mL cells. Four different fat/fat retainer ratios (FFRs) were tested (0.100, 0.075, 0.050 and 0.025) at 50 and 100 degrees C using n-pentane, n-hexane or n-heptane as extraction solvent. The best results were obtained with a FFR of 0.025 when applying a temperature of 100 degrees C. Both n-pentane and n-heptane were capable of replacing n-hexane as extraction solvent. A flush volume of 60% was sufficient as suggested in US Environmental Protection Agency Method 3545. The applicability of the method was demonstrated for naturally contaminated fish meal as well as various spiked and certified materials.     

The preparation of 7-substituted norbornadiene-2,3-dicarboxylic anhydrides and an experimental and theoretical study of their reactivity

Four new substituted methano-bridged or heteroatom-bridged norbornadienomaleic anhydrides have been prepared and converted to sesquinorbornadiene anhydrides by reaction with cyclic 1,3-dienes. The versatility of parity reversal, in conjunction with N-substituent steric effects, has been used to produce all three possible stereoisomers of the N,O-sesquinorbornadiene anhydrides in separate, stereoselective cycloadditions. The anhydrides have been synthesized by cyclization of their diacids (in situ production) or by flash vacuum pyrolysis of their furan adducts (yielding crystalline products); further fragmentation occurs at these or higher temperatures to produce five-membered carbocyclic or heterocyclic anhydrides. Activation energies have been evaluated for the fragmentation and cycloaddition processes using DFT calculations (B3LYP/6-31G∗) and these calculations correctly predict, which reaction can be intercepted at the norbornadienomaleic anhydride stage and preferred stereochemistry of cycloadducts.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Towards rod-shaped molecules based on the twelve-vertex ferratricarbollides

The compounds with a single and double -CH₂C₆H₄CH₂- spacer, [CpFeC₃B₈H₁₀-NH-CH₂C₆H₄CH₂-NH-C₃B₈H₁₀FeCp] and [CpFeC₃B₈H₁₀-N-(CH₂C₆H₄CH₂)₂-N-C₃B₈H₁₀FeCp], represent the first example of designed shaping by extremely stable cyclopentadienyl-ferratricarbollide (CpFeTCB) cages into rigid molecular constructions approaching linear arrangement.     

Carbon-bromine cleavage by dimethyl sulfoxide: the key step of C(5) functionalization of push-pull 2-alkylidene-4-oxothiazolidine vinyl bromides

Push-pull 2-alkylidene-4-oxothiazolidine vinyl bromides undergo efficient C(5) functionalization through DMSO-assisted carbon-bromine cleavage, followed by a bromine transfer-substitution (or elimination) sequence. A mechanism for this novel transformation is proposed.     

Synthesis and new rearrangements of 4-isoxazolin-4,5-dicarboxylic acid derivatives

Acyclic nitrones react with dimethyl acetylenedicarboxylate (DMAD) to give stable isoxazolines, from which the ones that contain electron-donating aromatic rings at the C3 position (R¹) were shown to undergo unprecedented fragmentation at room temperature, giving the R¹-aldehyde and inseparable product mixtures, probably due to the formation of highly reactive species such as iminocarbenes. Attempts to convert the isoxazolines to the corresponding stable azomethine ylides, by refluxing in toluene, again led to the same product mixtures as above (e.g., the room temperature decomposition). Isoxazolines when reacted with methoxide at room temperature afforded highly functionalised diastereomeric mixtures. Also, isoxazolines, when reacted with propylamine, gave the corresponding amides regioselectively, all of which were more stable than the parent isoxazolines.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Bienzymatic analytical microreactors for glucose, lactate, ethanol, galactose and l-amino acid monitoring in cell culture media

A new alternative method for bioprocess monitoring based on bienzymatic analytical microreactors integrated in a flow injection analysis (FIA) system is described. Glucose-, alcohol-, lactate-, galactose- and l-amino acid oxidases (GO, AO, LacO, GalO and LAAO) and horseradish peroxidase (HRP) are immobilized on controlled pore glass (CPG) and used for the development of glucose, ethanol, lactate, galactose and amino acid sensors. The analytical methodology is based on HRP catalysed reaction of hydrogen peroxide produced by oxidases with phenol-4-sulfonic acid and 4-aminoantipyrine. The immobilized enzymes are characterized and used for preparation of the packed bed analytical microreactors. Shelf life and operational stability of the microeactors are determined. GO/HRP, AO/HRP and LAAO/HRP microreactors showed excellent shelf life, they could be stored and reused for more than 6 months with no or very little activity loss, while GalO/HRP and LacO/HRP could be stored for shorter periods of time (10-20 days). Operational stability of GO and LacO microreactors was very good: an equivalent to 16,900 FIA injections of 25 μl to a LacO microreactor resulted in loss of half of its activity, immobilized GO was so stable that it was impossible to evaluate enzyme halflife. Immobilized GalO and LAAO lose their operational activity much faster: approximately 1400 and 8000 FIA injections of the respective substrate solution in a FIA set-up resulted in 50% activity loss. The methods with all the described microreactors were successfully validated using off-line samples from S. cerevisiae, E. coli and mesenchymal stem cell cultures with HPLC as the reference method.     

Understanding the factors controlling the photo-oxidation of natural DNA by enantiomerically pure intercalating ruthenium polypyridyl complexes through TA/TRIR studies with polydeoxynucleotides and mixed sequence oligodeoxynucleotides

Ruthenium polypyridyl complexes which can sensitise the photo-oxidation of nucleic acids and other biological molecules show potential for photo-therapeutic applications. In this article a combination of transient visible absorption (TrA) and time-resolved infra-red (TRIR) spectroscopy are used to compare the photo-oxidation of guanine by the enantiomers of [Ru(TAP)₂(dppz)]²⁺ in both polymeric {poly(dG-dC), poly(dA-dT) and natural DNA} and small mixed-sequence duplex-forming oligodeoxynucleotides. The products of electron transfer are readily monitored by the appearance of a characteristic TRIR band centred at ca. 1700 cm⁻¹ for the guanine radical cation and a band centered at ca. 515 nm in the TrA for the reduced ruthenium complex. It is found that efficient electron transfer requires that the complex be intercalated at a G-C base-pair containing site. Significantly, changes in the nucleobase vibrations of the TRIR spectra induced by the bound excited state before electron transfer takes place are used to identify preferred intercalation sites in mixed-sequence oligodeoxynucleotides and natural DNA. Interestingly, with natural DNA, while it is found that quenching is inefficient in the picosecond range, a slower electron transfer process occurs, which is not found with the mixed-sequence duplex-forming oligodeoxynucleotides studied.

Efficient electron transfer requires the complex to be intercalated at a G-C base-pair. Identification of preferred intercalation sites is achieved by TRIR monitoring of the nucleobase vibrations before electron transfer.     

Reaction of methyl 4-nitrobenzenesulfonate with Br- in water-formamide tetradecyltrimethylammonium bromide micellar solutions

Summary The reaction methyl 4-nitrobenzenesulfonate + Br^- was studied in water-formamide tetradecyltrimethylammonium bromide micellar solutions. A pseudophase kinetic model was used to quantitatively rationalize the kinetic micellar effects observed