Rapid and simple chromatographic separation of V(V) and V(IV) using KH-phthalate and their determination by flame atomic absorption spectrometry

A method was developed for the chromatographic separation of V(V) and V(IV) based on the different sorption forces of these vanadium species in C18 columns in presence of KH-phthalate. The vanadium species were detected with a flame atomic absorption spectrometer with acetylene/N₂O flame. The detection limits (3σ) of V(V) and V(IV) were 0.18 μg/mL and 0.15 μg/mL, respectively. The relative standard deviations (N = 5) are 4.2% and 3.4% for 20–20 μg/mL V(V) and V(IV), respectively. The sampling frequency is 75/h. Because of the special interaction occurring between phthalate and V(IV) on the C18 column and the acetylene/N₂O flame atomic absorption detection, practically no interferences can be detected even in large inorganic matrix.     

Thermal decomposition of cyclic alkylidine peroxides (tetraoxanes)

Thermal decomposition of molten 6,6-bis-(4-methoxycarbonyl-butyl)-1,2,4,5-tetraoxane has kinetic parameters similar to those of the other dialkyl peroxides:

A similar behaviour has also been found for 6,6-bis-(4-aminocarbonyl-butyl)-1,2,4,5-tetraoxane dissolved in dimethylformamide:

In the absence of solvent this cyclic dimeric peroxide is uncommonly stable owing to the relatively high melting point. The increase in activation energy and frequency factor (compensation effect) at the decomposition in the absence of solvent is explained by the stabile aggregation of the amino derivative of tetraoxane in the crystalline state.The reaction heat of the exothermic decomposition reaction equals 102 for the methoxy and 96±6 kcal mol^?1 for the amino derivative.The measurements of rate constants and reaction heat were carried out by the method of differential enthalpic analysis.     

Identification of ochratoxin A in food samples by chemical derivatization and gas chromatography-mass spectrometry.

The contamination of foods with ochratoxin A can be determined very sensitively by high-performance liquid chromatography (HPLC) with fluorescence detection. A novel procedure is described to confirm OA-positive results quantitatively down to the HPLC detection limit of 0.1 ppb. For this, ochratoxin A in the sample extract is converted into its O-methylochratoxin A methyl ester derivative, which is identified subsequently by gas chromatography-mass spectrometry negative-ion chemical ionization and multiple ion detection modes using the hexadeuterated O-methyl-d3-ochratoxin A methyl-d3 ester derivative as internal standard for quantification. In the analysis of more than 60 contaminated samples, the procedure was found to be very accurate.     

A microcomputer-controlled titrator for automated individual analysis

A titration unit for automatic analysis systems is described. The titrator performs different titrations specified by strings of digital parameters. It has 4 independent titration stations with individual electrode systems. A multiburette with 20 cylinders provides all stations with the necessary reagents. End-point titrations, and incremental and equilibrium titrations are controlled by a microcomputer. In combination with a sample transport and a desk calculator, the titrator can be used to process automatically samples of different natures which require different treatment.     

Dual-label autoradiographic analysis of human skin fibroblast and myoblast proteins by two-dimensional polyacrylamide gel electrophoresis using immobilised pH gradients in the first dimension

Horizontal two-dimensional polyacrylamide gel electrophoresis with immobilised pH gradients in the first dimension has been applied to the analysis of human skin fibroblast and muscle myoblast total cell proteins. Excellent two-dimensional separations of skin fibroblast proteins were obtained using pH 4-10 immobilised pH gradient gels with a long interelectrode distance (16 cm), but resolution was degraded, particularly of the more acidic proteins, by the use of shorter (10 cm) gels. Improved resolution of acidic and basic proteins was obtained using separate pH 4-7 and pH 7-10 immobilised pH gradient gels respectively in the first dimension. Two-dimensional protein maps of skin fibroblast proteins were visualised both by silver staining and by autoradiography of samples labelled synthetically with [35S]methionine. Horizontal two-dimensional electrophoresis, using pH 4-7 and pH 7-10 immobilised pH gradient gels in the first dimension, was applied to the analysis of protein samples from skin fibroblasts and muscle myoblasts dual-labelled synthetically with [35S]methionine and [75Se]selenomethionine in an attempt to identify sets of proteins specific to each cell type. In addition, two-dimensional maps or protein samples derived from normal individuals and patients with Duchenne muscular dystrophy were compared to search for protein changes associated with the disease state. Although sets of qualitative protein spot differences were observed by visual inspection of the two-dimensional gels, more rigorous qualitative and quantitative analysis of the patterns using a computerised analysis system will be required to obtain the maximum amount of information from these data.     

Proton bound homodimers and heterodimers of amides and amines in the gas phase. Equilibrium studies by Fourier transform ion cyclotron resonance spectrometry

By injection of the proton bound homodimer [DMF.H+.DMF] of N,N-dimethylformamide (DMF) generated in an external ion source into a mixture of DMF and a second base within the cell of a Fourier transform ion cyclotron resonance (FT-ICR) spectrometer the equilibria between [DMF.H+.DMF] and the other possible proton bound dimers [DMF.H+.base] and [base.H+.base] have been studied for 13 different bases. Strongly polar bases like aliphatic amides and dimethyl sulfoxide (DMSO) exchange both DMF in [DMF.H+.DMF] by a two step process, while the almost non-polar amines exchange only one DMF. If the base is a primary or secondary amine, the proton bound heterodimer [DMF.H+.amine] reacts further by the addition of one DMF to create a proton bound trimer [(DMF)2.H+.amine]. The affinity deltaG(DMFH+) of the bases towards protonated DMF relative to neutral DMF depends linearly on the difference deltaGB of the gas phase basicity of DMF and the other base, but different correlation lines are obtained for polar and non-polar ligands (deltaGDMFH+ = 0.44GB(base)-375 [kJ/mol] (r = 0.97) and deltaGDMFH+ = 0.46GB(base)-397 [kJ/mol] (r = 0.99), respectively). This different behavior is explained by a different character of the proton bridge in the heterodimers containing only polar ligands and those incorporating a non-polar ligand besides DMF. The former dimers contain a more or less symmetric proton bridge while the latter can be viewed as a protonated base solvated by DMF. The available data have been used to calculate the molecular pair gas phase basicity of DMF and the 13 bases used and to estimate the dissociation energies of the bonds of the proton bridge in various proton bound heterodimers.     

Electron and light microscopical investigation of defect structures in mesophases of pharmaceutical substances

 Transmission electron microscopy of freeze fractured and replicated samples (TEM) and polarizing light microscopy (PLM) are used to investigate the defect structures of the thermotropic and lyotropic mesophases of the non-steroidal antiinflammatory drug fenoprofen sodium and of the thermotropic mesophase of the nonionic surfactant sucrose oleate (O1570). All mesophases have a layered, smectic structure. The thermotropic liquid crystal of feno-profen sodium is an interdigitated smectic A phase (smectic Ad) having the highest viscosity of the investigated samples. The thermotropic mesophase of the sugar ester is also of the type smectic A, likely to be of subtype smectic A2 (bilayered smectic structure). The lyotropic mesophase is of lamellar liquid crystalline nature and has a much lower viscosity than the thermotropic mesophases. In the PLM the lyotropic fenoprofen mesophase has a strong tendency to form a pseudoisotropic texture, indicating a strong tendency to form undisturbed layered structures. Other textures exhibited in the PLM are fan-shaped texture and maltese-cross texture. Confocal domains, cylinders, pits and peaks as well as screw dislocations are found in great number in the TEM. However, no greater regions of undisturbed lamellar arrangement in the lyotropic mesophase could be detected. The only texture of the thermotropic fenoprofen mesophase visible in the PLM is the fan-shaped texture, indicating confocal domains as predominant structural elements. However, no confocal domains (tori or Dupin cyclides) are found in the TEM. In the PLM the sugar–ester mesophase exhibited a fan-shaped texture, maltese crosses and oily streaks as dominant textures. In the TEM only a few +π and −π disclinations and imperfect confocal domains could be detected. The discrepancies in the appearance of defect structures and textures between the mesophases as well as the discrepancies in the findings in the PLM and in the TEM investigations are caused by the different sample preparation and the different viscosities of the mesophases. Received: 28 May 1997 Accepted: 2 September 1997     

Structural evolution of hexa-peri-hexabenzocoronene adlayers in heteroepitaxy on n-pentacontane template monolayers

The growth and structure of self-assembled adlayers of hexakis(n-dodecyl)-peri-hexabenzocoronene (HBC-C12) adsorbed on highly ordered pyrolitic graphite (HOPG) decorated by an n-pentacontane (n-C50H102) monolayer have been investigated by scanning tunneling microscopy (STM). Whereas on HOPG the HBC-C12 molecules readily self-assemble into a unique stable 2D structure, on the [n-C50H102 monolayer/graphite] system we observe morphological phase transitions with formation of time dependent alpha, beta, and gamma phases (alpha-->beta-->gamma). The initial alpha-phase is similar to that obtained on bare graphite, while intermediate beta- and final gamma-structures present molecular dimers and rows, respectively. The observed two-dimensional polymorphism is due to weak interaction between HBC-C12 molecules and n-C50H102-modified graphite substrate. Our results constitute an important step toward the control of the growth and structure of highly ordered monolayers of functional conjugated molecules by modifying the graphite surface with an n-alkane monolayer of appropriate chain length.     

Spectroscopic investigation of cyclodextrin monomers,derivatives, polymers and azo dyes (1)

Circular dichroism (CD) and visible spectra of inclusion compounds between Methyl Orange (MO) analogues and -, -, -cyclodextrin (cdx), 2,6-dimethyl-and 2,3,6-trimethyl--cdx, water soluble -, -, -cdx polymer products were investigated. In the CD-spectroscopic investigation, the complex with -cdx epichlorohydrin condensate showed a large amplitude and splitting of the induced ^* band. Fractions of glyceryl ether of less than 2000 and polymer of more than 10000 dalton molecular mass were separated. Complexes of above two fractions and MO showed the same splitting spectral pattern. Job's plots from visible spectra showed the formation of the 11 complex and CD-data suggested the co-existence of the 21 MO-cdx complex. This splitting pattern showed the reversal of the signs when -cdx-ethyleneglycol-bis(epoxypropyl) ether was used and disappeared when larger host molecules and azo dyes were used. The splitting was explained by exciton interaction.     

Adding water to sugar: a spectroscopic and computational study of alpha- and beta-phenylxyloside in the gas phase

The gas phase structures of phenyl alpha- and beta-d-xylopyranoside (alpha- and beta-pXyl) and their mono-hydrates have been investigated using a combination of resonant two-photon ionization (R2PI), ultra-violet hole-burning and resonant infrared ion dip spectroscopy, coupled with density functional theory (DFT) and ab initio computation. The hole-burning experiments indicate the population of a single conformer only, in each of the two anomers. Their experimental and calculated infrared spectra are both consistent with a conformational assignment corresponding to the computed global minimum configuration. All three OH groups are oriented towards the oxygen atom (O1) on the anomeric carbon atom to form an all trans(ttt) counter-clockwise chain of hydrogen bonds. The mono-hydrates, alpha- and beta-pXyl(H(2)O) each populate two distinct structures in the molecular beam environment, with the water molecule inserted between OH4 and OH3 or between OH3 and OH2 in alpha-pXyl(H2O), and between OH2 and O1 in either of two alternative orientations, in beta-pXyl(H2O). In all of the mono-hydrated xyloside complexes, the water molecule inserts into the weakest link of the sugar molecules' hydrogen-bonded chain of hydroxy groups, creating a single extended chain, strengthened by co-operativity. The all-trans configuration of the xylose moiety is retained and the mono-hydrate structures correspond to those calculated to lie at the lowest relative energies.